VE1210K251R050

Product Overview

Category: Electronic Component
Use: Voltage Regulator
Characteristics: High precision, low dropout voltage, small package size
Package: SOT-23-5
Essence: Regulates input voltage to a stable output voltage
Packaging/Quantity: Tape and Reel, 3000 units per reel

Specifications

Input Voltage Range: 2.5V to 12V
Output Voltage: 2.5V
Output Current: 50mA
Dropout Voltage: 200mV at 10mA
Operating Temperature Range: -40°C to 85°C

Detailed Pin Configuration

GND
VOUT
NC
NC
VIN

Functional Features

High Precision: Provides accurate and stable output voltage regulation
Low Dropout Voltage: Minimizes power loss and extends battery life
Small Package Size: Ideal for space-constrained applications

Advantages

Reliable voltage regulation
Low power consumption
Compact design

Disadvantages

Limited output current capacity
Restricted input voltage range

Working Principles

The VE1210K251R050 utilizes a feedback control loop to compare the output voltage with a reference voltage, adjusting the pass device to maintain a constant output voltage despite variations in input voltage and load conditions.

Detailed Application Field Plans

This voltage regulator is suitable for various battery-powered applications such as portable electronic devices, IoT sensors, and wearable gadgets. It can also be used in instrumentation and industrial control systems where precise voltage regulation is required.

Detailed and Complete Alternative Models

VE1210K251R100: Higher output current (100mA)
VE1210K251R033: Lower output voltage (3.3V)
VE1210K251R120: Wider input voltage range (2.5V to 20V)

Note: The alternative models listed above are part of the same series and offer similar functionality with varying specifications.

This comprehensive entry provides an in-depth understanding of the VE1210K251R050 voltage regulator, including its specifications, features, application areas, and alternatives.

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan VE1210K251R050 dalam solusi teknis

What is VE1210K251R050?
- VE1210K251R050 is a specific type of resistor commonly used in electronic circuits to control the flow of electric current.
What are the typical applications of VE1210K251R050?
- VE1210K251R050 is often used in power supplies, motor controls, and various electronic devices where precise resistance values are required.
What is the power rating of VE1210K251R050?
- The power rating of VE1210K251R050 is 0.25 watts, which determines its ability to dissipate heat generated during operation.
What is the resistance value of VE1210K251R050?
- The resistance value of VE1210K251R050 is 250 ohms, which is crucial for controlling the flow of current in a circuit.
Can VE1210K251R050 be used in high-temperature environments?
- Yes, VE1210K251R050 is designed to withstand high temperatures, making it suitable for applications where heat dissipation is a concern.
Is VE1210K251R050 suitable for precision applications?
- Yes, VE1210K251R050 offers precise resistance values, making it suitable for precision electronic circuits and applications.
What are the physical dimensions of VE1210K251R050?
- VE1210K251R050 typically has a small form factor, with dimensions of 3.2mm x 1.6mm, making it suitable for compact electronic designs.
Does VE1210K251R050 require any special handling during installation?
- VE1210K251R050 should be handled with care to avoid damage to its delicate components, and proper soldering techniques should be used during installation.
Can VE1210K251R050 be used in automotive applications?
- Yes, VE1210K251R050 can be used in automotive electronics, provided it meets the necessary specifications for temperature, vibration, and other environmental factors.
Are there any common failure modes associated with VE1210K251R050?
- Common failure modes for VE1210K251R050 include overheating due to excessive current, mechanical damage, or exposure to environmental contaminants. Regular testing and inspection can help prevent these issues.