IXYS
Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
IXTN90N25L2
Lihat Detail Lembar Data

IXTN90N25L2

Introduction

The IXTN90N25L2 is a power MOSFET belonging to the category of electronic components used in power management and control circuits. This device offers high performance and reliability, making it suitable for a wide range of applications.

Basic Information Overview

  • Category: Power MOSFET
  • Use: Power management and control circuits
  • Characteristics: High performance, reliability
  • Package: TO-263-3
  • Essence: Efficient power switching
  • Packaging/Quantity: Typically available in reels or tubes

Specifications

  • Voltage Rating: 250V
  • Current Rating: 90A
  • On-State Resistance (RDS(on)): 0.09 Ohms
  • Gate Threshold Voltage: 2.5V
  • Operating Temperature Range: -55°C to 175°C

Detailed Pin Configuration

The IXTN90N25L2 features a standard TO-263-3 package with three pins: 1. Gate (G): Input for controlling the switching operation 2. Drain (D): Connects to the load or power supply 3. Source (S): Connected to the ground or common reference point

Functional Features

  • High voltage capability
  • Low on-state resistance
  • Fast switching speed
  • Enhanced thermal performance

Advantages and Disadvantages

Advantages

  • High power handling capacity
  • Low conduction losses
  • Suitable for high-frequency applications
  • Good thermal stability

Disadvantages

  • Higher cost compared to standard MOSFETs
  • Sensitive to electrostatic discharge (ESD)

Working Principles

The IXTN90N25L2 operates based on the principle of field-effect transistors, where the voltage applied to the gate terminal controls the flow of current between the drain and source terminals. By modulating the gate voltage, the device can efficiently switch high power loads on and off.

Detailed Application Field Plans

The IXTN90N25L2 is commonly used in the following applications: - Switching power supplies - Motor control systems - Inverters and converters - Electronic ballasts - Audio amplifiers

Detailed and Complete Alternative Models

  • IXTN90N25L2P: Similar specifications with enhanced ESD protection
  • IXTN80N25L2: Lower current rating with comparable voltage and RDS(on)
  • IXTN90N20L2: Higher on-state resistance but lower gate charge

In conclusion, the IXTN90N25L2 power MOSFET offers high-performance characteristics and is well-suited for various power management and control applications. Its advanced features and robust design make it a reliable choice for demanding electronic systems.

(Word count: 366)

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan IXTN90N25L2 dalam solusi teknis

  1. What is IXTN90N25L2?

    • IXTN90N25L2 is a high voltage, high speed N-channel power MOSFET designed for various technical solutions requiring efficient power management.

  2. What are the key features of IXTN90N25L2?

    • The key features of IXTN90N25L2 include a high voltage rating, low on-state resistance, fast switching speed, and a rugged design suitable for demanding applications.

  3. In what technical solutions can IXTN90N25L2 be used?

    • IXTN90N25L2 can be used in applications such as power supplies, motor control, inverters, and other high voltage switching circuits.

  4. What is the maximum voltage and current rating of IXTN90N25L2?

    • IXTN90N25L2 has a maximum voltage rating of 250V and a continuous drain current rating of 90A.

  5. How does IXTN90N25L2 contribute to power management in technical solutions?

    • IXTN90N25L2 offers low on-state resistance, which helps minimize power losses and improve overall efficiency in power management applications.

  6. What are the thermal characteristics of IXTN90N25L2?

    • IXTN90N25L2 is designed with low thermal resistance to ensure effective heat dissipation, making it suitable for high power applications.

  7. Does IXTN90N25L2 have built-in protection features?

    • IXTN90N25L2 may include built-in protection features such as overcurrent protection and thermal shutdown to safeguard against potential damage.

  8. Are there any application notes or reference designs available for IXTN90N25L2?

    • Yes, application notes and reference designs are available to assist engineers in implementing IXTN90N25L2 in various technical solutions.

  9. Can IXTN90N25L2 be used in automotive applications?

    • Yes, IXTN90N25L2 is suitable for automotive applications such as electric vehicle powertrains, battery management systems, and onboard chargers.

  10. Where can I find detailed specifications and datasheets for IXTN90N25L2?

    • Detailed specifications and datasheets for IXTN90N25L2 can be found on the manufacturer's website or through authorized distributors.