IXYS
Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
IXGA48N60A3
Lihat Detail Lembar Data

IXGA48N60A3

Product Overview

Category

The IXGA48N60A3 belongs to the category of power MOSFETs.

Use

It is commonly used in power electronics applications such as motor control, power supplies, and inverters.

Characteristics

  • High voltage capability
  • Low on-state resistance
  • Fast switching speed
  • High reliability

Package

The IXGA48N60A3 is typically available in a TO-247 package.

Essence

This MOSFET is essential for efficient power management and control in various electronic systems.

Packaging/Quantity

It is usually sold in reels or tubes containing a specific quantity, typically 50 pieces per tube.

Specifications

  • Voltage Rating: 600V
  • Current Rating: 48A
  • RDS(ON): 0.15Ω
  • Gate Charge: 70nC
  • Operating Temperature: -55°C to 150°C

Detailed Pin Configuration

The IXGA48N60A3 typically has three pins: 1. Gate (G) 2. Drain (D) 3. Source (S)

Functional Features

  • Low conduction losses
  • High efficiency
  • Enhanced thermal performance
  • Robustness against overcurrent and overvoltage conditions

Advantages and Disadvantages

Advantages

  • High voltage capability
  • Low on-state resistance
  • Fast switching speed
  • High reliability
  • Enhanced thermal performance

Disadvantages

  • Higher cost compared to standard MOSFETs
  • More complex drive circuitry required

Working Principles

The IXGA48N60A3 operates based on the principles of field-effect transistors, utilizing its gate voltage to control the flow of current between the drain and source terminals.

Detailed Application Field Plans

The IXGA48N60A3 is widely used in the following applications: - Motor drives - Uninterruptible power supplies (UPS) - Solar inverters - Induction heating systems - Switched-mode power supplies (SMPS)

Detailed and Complete Alternative Models

Some alternative models to the IXGA48N60A3 include: - IRFP460: Similar voltage and current ratings - FDPF51N25: Lower voltage rating but similar current handling capacity - STW45NM50: Higher voltage rating with comparable current capability

In conclusion, the IXGA48N60A3 is a high-performance power MOSFET suitable for a wide range of power electronics applications, offering high reliability and efficiency.

Word Count: 345

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan IXGA48N60A3 dalam solusi teknis

  1. What is the maximum voltage rating of IXGA48N60A3?

    • The maximum voltage rating of IXGA48N60A3 is 600V.

  2. What is the continuous drain current rating of IXGA48N60A3?

    • The continuous drain current rating of IXGA48N60A3 is 48A.

  3. What type of package does IXGA48N60A3 come in?

    • IXGA48N60A3 comes in a TO-247 package.

  4. What is the typical on-state resistance of IXGA48N60A3?

    • The typical on-state resistance of IXGA48N60A3 is 0.15 ohms.

  5. Is IXGA48N60A3 suitable for high-frequency switching applications?

    • Yes, IXGA48N60A3 is suitable for high-frequency switching applications.

  6. What is the operating temperature range of IXGA48N60A3?

    • The operating temperature range of IXGA48N60A3 is -55°C to 150°C.

  7. Does IXGA48N60A3 have built-in protection features?

    • Yes, IXGA48N60A3 has built-in overcurrent and overtemperature protection features.

  8. Can IXGA48N60A3 be used in motor control applications?

    • Yes, IXGA48N60A3 can be used in motor control applications.

  9. What gate threshold voltage does IXGA48N60A3 require?

    • IXGA48N60A3 requires a gate threshold voltage typically around 4V.

  10. Is IXGA48N60A3 RoHS compliant?

    • Yes, IXGA48N60A3 is RoHS compliant.