IS25LP128-JLLE-TR belongs to the category of Serial NOR Flash Memory.
This product is primarily used for storing and retrieving data in electronic devices such as computers, smartphones, tablets, and other consumer electronics.
The IS25LP128-JLLE-TR is typically packaged in tape and reel format. Each reel contains a specific quantity of flash memory chips, usually around 2500 units per reel.
The IS25LP128-JLLE-TR features a standard pin configuration for SPI flash memories. The following table provides a detailed overview of the pin functions:
| Pin Number | Pin Name | Function | |------------|----------|----------| | 1 | CS# | Chip Select (Active Low) | | 2 | SO | Serial Data Output | | 3 | WP# | Write Protect (Active Low) | | 4 | GND | Ground | | 5 | SI | Serial Data Input | | 6 | SCK | Serial Clock | | 7 | HOLD# | Hold (Active Low) | | 8 | VCC | Power Supply Voltage |
The IS25LP128-JLLE-TR utilizes the Serial Peripheral Interface (SPI) protocol for communication with the host device. It stores data in non-volatile memory cells, which can be electrically programmed and erased. The SPI interface facilitates the transfer of data between the flash memory and the host device, allowing for efficient read and write operations.
The IS25LP128-JLLE-TR is widely used in various electronic devices and applications, including: - Embedded systems - Networking equipment - Automotive electronics - Industrial control systems - Consumer electronics
These alternative models provide similar functionality and can be considered as alternatives to the IS25LP128-JLLE-TR based on specific requirements and compatibility considerations.
In conclusion, the IS25LP128-JLLE-TR is a high-performance Serial NOR Flash Memory that offers fast data transfer, large storage capacity, and low power consumption. Its compact package and reliability make it suitable
Sure! Here are 10 common questions and answers related to the application of IS25LP128-JLLE-TR in technical solutions:
Q: What is IS25LP128-JLLE-TR? A: IS25LP128-JLLE-TR is a specific model of flash memory chip manufactured by Integrated Silicon Solution Inc. It has a capacity of 128 megabits (16 megabytes) and is commonly used in various electronic devices.
Q: What are the key features of IS25LP128-JLLE-TR? A: The key features of IS25LP128-JLLE-TR include high-speed data transfer, low power consumption, wide operating voltage range, small form factor, and compatibility with industry-standard interfaces like SPI.
Q: In which applications can IS25LP128-JLLE-TR be used? A: IS25LP128-JLLE-TR can be used in a wide range of applications such as automotive electronics, industrial control systems, consumer electronics, networking equipment, and IoT devices that require non-volatile storage.
Q: How does IS25LP128-JLLE-TR connect to a microcontroller or processor? A: IS25LP128-JLLE-TR uses the Serial Peripheral Interface (SPI) protocol to communicate with microcontrollers or processors. It requires a few dedicated pins for communication, including clock, data input, data output, and chip select.
Q: What is the maximum data transfer speed of IS25LP128-JLLE-TR? A: The maximum data transfer speed of IS25LP128-JLLE-TR is typically specified by the manufacturer and depends on the specific operating conditions. It can range from a few megabits per second to tens of megabits per second.
Q: Can IS25LP128-JLLE-TR be easily soldered onto a PCB? A: Yes, IS25LP128-JLLE-TR is available in a surface-mount package (JLLE) that can be easily soldered onto a printed circuit board (PCB) using standard surface-mount technology (SMT) equipment.
Q: Does IS25LP128-JLLE-TR support hardware or software write protection? A: Yes, IS25LP128-JLLE-TR supports both hardware and software write protection mechanisms. It provides dedicated pins for hardware write protection and also allows software commands to enable or disable write protection.
Q: What is the typical lifespan of IS25LP128-JLLE-TR? A: The typical lifespan of IS25LP128-JLLE-TR is specified by the manufacturer and depends on various factors such as operating conditions, usage patterns, and programming/erasing cycles. It is typically rated for thousands to tens of thousands of program/erase cycles.
Q: Can IS25LP128-JLLE-TR operate in extreme temperature conditions? A: Yes, IS25LP128-JLLE-TR is designed to operate reliably in a wide temperature range, typically from -40°C to +85°C. This makes it suitable for applications that require operation in harsh environments.
Q: Are there any specific precautions to consider when using IS25LP128-JLLE-TR? A: It is important to follow the manufacturer's datasheet and guidelines for proper handling, storage, and usage of IS25LP128-JLLE-TR. Precautions may include avoiding excessive voltage or current, protecting against electrostatic discharge (ESD), and ensuring proper power supply decoupling.