ISSI, Integrated Silicon Solution Inc
Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
IS25LP016D-JKLE
Lihat Detail Lembar Data

IS25LP016D-JKLE

Product Overview

Category

IS25LP016D-JKLE belongs to the category of flash memory devices.

Use

It is primarily used for data storage and retrieval in various electronic devices such as smartphones, tablets, digital cameras, and portable media players.

Characteristics

  • High-speed data transfer rate
  • Non-volatile memory
  • Compact size
  • Low power consumption

Package

IS25LP016D-JKLE is available in a small form factor package, making it suitable for integration into compact electronic devices.

Essence

The essence of IS25LP016D-JKLE lies in its ability to store and retrieve large amounts of data reliably and quickly.

Packaging/Quantity

This flash memory device is typically packaged individually or in bulk quantities, depending on the requirements of the customer or manufacturer.

Specifications

  • Memory capacity: 16 megabits (2 megabytes)
  • Interface: Serial Peripheral Interface (SPI)
  • Operating voltage: 2.7V - 3.6V
  • Operating temperature range: -40°C to +85°C
  • Data retention: Up to 20 years
  • Erase/Program cycles: Up to 100,000 cycles

Detailed Pin Configuration

  1. VCC - Power supply
  2. GND - Ground
  3. HOLD - Hold input
  4. WP - Write protect input
  5. SIO0 - Serial data input/output
  6. SIO1 - Serial data output
  7. SIO2 - Serial data input/output
  8. SIO3 - Serial data input/output
  9. CS - Chip select
  10. CLK - Clock input

Functional Features

  • High-speed read and write operations
  • Flexible erase options (sector, block, or chip erase)
  • Protection mechanisms against accidental data modification
  • Efficient power management features
  • Error correction and detection capabilities

Advantages and Disadvantages

Advantages

  • Fast data transfer rate enhances overall system performance
  • Compact size allows for integration into space-constrained devices
  • Low power consumption prolongs battery life
  • Reliable data retention ensures long-term storage integrity

Disadvantages

  • Limited storage capacity compared to higher-end flash memory devices
  • Relatively higher cost per unit compared to other memory technologies

Working Principles

IS25LP016D-JKLE utilizes the Serial Peripheral Interface (SPI) to communicate with the host device. It stores data in non-volatile memory cells, which retain information even when power is removed. The device uses a combination of electrical signals and logical operations to read, write, and erase data.

Detailed Application Field Plans

IS25LP016D-JKLE finds applications in various electronic devices, including but not limited to: - Smartphones and tablets - Digital cameras - Portable media players - Automotive infotainment systems - Industrial control systems - Wearable devices

Detailed and Complete Alternative Models

  1. IS25LP032D-JKLE: 32 megabits (4 megabytes) flash memory device with similar characteristics and specifications.
  2. IS25LP064D-JKLE: 64 megabits (8 megabytes) flash memory device with increased storage capacity.

These alternative models offer greater storage capacity while maintaining compatibility with the IS25LP016D-JKLE in terms of pin configuration and functional features.

Word count: 520 words

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan IS25LP016D-JKLE dalam solusi teknis

Sure! Here are 10 common questions and answers related to the application of IS25LP016D-JKLE in technical solutions:

  1. Q: What is IS25LP016D-JKLE? A: IS25LP016D-JKLE is a serial NOR flash memory chip manufactured by Integrated Silicon Solution Inc. It offers 16 megabits (2 megabytes) of storage capacity.

  2. Q: What are the key features of IS25LP016D-JKLE? A: The key features of IS25LP016D-JKLE include high-speed read and write operations, low power consumption, wide operating voltage range, and compatibility with various microcontrollers and systems.

  3. Q: How can IS25LP016D-JKLE be used in technical solutions? A: IS25LP016D-JKLE can be used for code storage, firmware updates, data logging, configuration storage, and other applications that require non-volatile memory in embedded systems.

  4. Q: What is the interface used to communicate with IS25LP016D-JKLE? A: IS25LP016D-JKLE uses a standard Serial Peripheral Interface (SPI) for communication with microcontrollers or other devices.

  5. Q: What is the maximum operating frequency of IS25LP016D-JKLE? A: IS25LP016D-JKLE supports clock frequencies up to 104 MHz, allowing for fast data transfer rates.

  6. Q: Can IS25LP016D-JKLE be easily soldered onto a PCB? A: Yes, IS25LP016D-JKLE comes in a standard 8-pin SOIC package, which is commonly used and can be easily soldered onto a PCB.

  7. Q: Does IS25LP016D-JKLE support sector or block erase operations? A: Yes, IS25LP016D-JKLE supports both sector and block erase operations, allowing for efficient management of data storage.

  8. Q: Is IS25LP016D-JKLE resistant to power interruptions during write operations? A: Yes, IS25LP016D-JKLE features a built-in power-loss protection mechanism that ensures data integrity even in the event of power interruptions.

  9. Q: Can IS25LP016D-JKLE be used in industrial temperature environments? A: Yes, IS25LP016D-JKLE is designed to operate reliably in a wide temperature range, typically from -40°C to +85°C.

  10. Q: Are there any development tools or software libraries available for IS25LP016D-JKLE? A: Yes, Integrated Silicon Solution Inc. provides development tools, datasheets, application notes, and software libraries to assist with the integration of IS25LP016D-JKLE into technical solutions.

Please note that the answers provided here are general and may vary depending on specific implementation requirements and system configurations.