Intersil
Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
ISL6613AIR-T
Lihat Detail Lembar Data

ISL6613AIR-T

Product Overview

Category

ISL6613AIR-T belongs to the category of integrated circuits (ICs).

Use

This product is commonly used in power management applications.

Characteristics

  • Integrated circuit
  • Power management functionality
  • High efficiency
  • Compact size

Package

ISL6613AIR-T is available in a small outline integrated circuit (SOIC) package.

Essence

The essence of ISL6613AIR-T lies in its ability to efficiently manage power in various electronic devices.

Packaging/Quantity

This product is typically packaged in reels and is available in quantities suitable for mass production.

Specifications

  • Input Voltage Range: 4.5V to 18V
  • Output Voltage Range: 0.6V to 5.5V
  • Maximum Continuous Output Current: 10A
  • Switching Frequency: 300kHz to 1MHz
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

ISL6613AIR-T has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. BOOT: Bootstrap capacitor connection pin
  4. LX: Inductor connection pin
  5. COMP: Compensation pin
  6. FB: Feedback pin
  7. EN: Enable pin
  8. VCC: Supply voltage pin

Functional Features

  • High-efficiency synchronous buck converter
  • Adjustable output voltage
  • Overcurrent protection
  • Thermal shutdown protection
  • Soft-start capability
  • External synchronization option

Advantages and Disadvantages

Advantages

  • High efficiency leads to reduced power consumption
  • Compact size allows for space-saving designs
  • Wide input and output voltage range provides flexibility
  • Comprehensive protection features ensure device safety

Disadvantages

  • May require additional external components for certain applications
  • Limited maximum continuous output current may not be suitable for high-power devices

Working Principles

ISL6613AIR-T operates as a synchronous buck converter, converting a higher input voltage to a lower output voltage with high efficiency. It utilizes pulse-width modulation (PWM) techniques to regulate the output voltage and current. The integrated protection features ensure safe operation under various conditions.

Detailed Application Field Plans

ISL6613AIR-T finds applications in various fields, including but not limited to: - Power supplies for computer systems - Industrial automation equipment - Telecommunications devices - Consumer electronics - Automotive electronics

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to ISL6613AIR-T are: - LM2596S-ADJ - LT8610ABEMSE#PBF - TPS54332DDAR

These models can be considered based on specific requirements and design constraints.

Note: The content provided above is approximately 300 words. Additional information can be added to meet the required word count of 1100 words.

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan ISL6613AIR-T dalam solusi teknis

Sure! Here are 10 common questions and answers related to the application of ISL6613AIR-T in technical solutions:

  1. Q: What is ISL6613AIR-T? A: ISL6613AIR-T is a high-performance dual MOSFET driver designed for driving two N-channel power MOSFETs in a synchronous buck or half-bridge configuration.

  2. Q: What is the maximum operating voltage of ISL6613AIR-T? A: The maximum operating voltage of ISL6613AIR-T is 18V.

  3. Q: What is the typical output current capability of ISL6613AIR-T? A: The typical output current capability of ISL6613AIR-T is ±4A.

  4. Q: Can ISL6613AIR-T be used in automotive applications? A: Yes, ISL6613AIR-T is suitable for automotive applications as it meets the AEC-Q100 Grade 1 qualification standards.

  5. Q: What is the purpose of using ISL6613AIR-T in a synchronous buck converter? A: ISL6613AIR-T is used to drive the high-side and low-side MOSFETs in a synchronous buck converter, enabling efficient power conversion.

  6. Q: Does ISL6613AIR-T have built-in protection features? A: Yes, ISL6613AIR-T includes various protection features such as undervoltage lockout (UVLO), overcurrent protection (OCP), and thermal shutdown.

  7. Q: What is the recommended operating temperature range for ISL6613AIR-T? A: The recommended operating temperature range for ISL6613AIR-T is -40°C to +125°C.

  8. Q: Can ISL6613AIR-T be used in high-frequency applications? A: Yes, ISL6613AIR-T is designed to operate at high frequencies and can be used in applications with switching frequencies up to several hundred kilohertz.

  9. Q: Does ISL6613AIR-T require an external bootstrap diode? A: No, ISL6613AIR-T has an integrated bootstrap diode, eliminating the need for an external diode.

  10. Q: What is the package type of ISL6613AIR-T? A: ISL6613AIR-T is available in a 16-lead QFN (Quad Flat No-Lead) package.