Intersil
Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
ISL3285EIRTZ-T
Lihat Detail Lembar Data

ISL3285EIRTZ-T

Product Overview

Category

The ISL3285EIRTZ-T belongs to the category of RS-485/RS-422 Transceivers.

Use

It is used for bidirectional communication in noisy industrial environments.

Characteristics

  • Robust communication in harsh environments
  • Low power consumption
  • High data rates
  • ESD protection

Package

The ISL3285EIRTZ-T comes in a small outline, 8-lead package.

Essence

This transceiver is essential for reliable and noise-immune data transmission in industrial settings.

Packaging/Quantity

The ISL3285EIRTZ-T is typically packaged in reels with a quantity of 2500 units per reel.

Specifications

  • Supply Voltage: 3V to 5.5V
  • Data Rate: Up to 20Mbps
  • Operating Temperature Range: -40°C to 85°C
  • ESD Protection: ±16.5kV HBM

Detailed Pin Configuration

The detailed pin configuration for the ISL3285EIRTZ-T is as follows: 1. A (Driver Output A) 2. B (Driver Output B) 3. GND (Ground) 4. VCC (Supply Voltage) 5. RO (Receiver Output) 6. RE (Receiver Output Enable) 7. DE (Driver Output Enable) 8. DI (Driver Input)

Functional Features

  • Enhanced ESD protection
  • Hot plug-in protection
  • Full fail-safe operation
  • Low quiescent current

Advantages and Disadvantages

Advantages

  • Robust communication in noisy environments
  • Wide operating voltage range
  • High data rates

Disadvantages

  • Higher cost compared to standard transceivers
  • More complex pin configuration

Working Principles

The ISL3285EIRTZ-T operates on the principle of differential signaling, allowing it to effectively reject common-mode noise and provide reliable communication in industrial environments.

Detailed Application Field Plans

The ISL3285EIRTZ-T is well-suited for use in various industrial applications, including: - Factory automation - Process control - Building automation - Industrial networking

Detailed and Complete Alternative Models

Some alternative models to the ISL3285EIRTZ-T include: - MAX485 - SN65HVD72 - LTC2850

In conclusion, the ISL3285EIRTZ-T is a robust RS-485/RS-422 transceiver designed for reliable communication in noisy industrial environments. Its high data rates, low power consumption, and enhanced ESD protection make it an ideal choice for various industrial applications.

[Word count: 346]

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan ISL3285EIRTZ-T dalam solusi teknis

  1. What is the ISL3285EIRTZ-T?

    • The ISL3285EIRTZ-T is a RS-485/RS-422 transceiver designed for high-speed communication in industrial applications.

  2. What is the operating voltage range of ISL3285EIRTZ-T?

    • The operating voltage range of ISL3285EIRTZ-T is from 3V to 5.5V.

  3. What is the data rate supported by ISL3285EIRTZ-T?

    • ISL3285EIRTZ-T supports data rates up to 20Mbps, making it suitable for high-speed communication requirements.

  4. What are the key features of ISL3285EIRTZ-T?

    • Some key features of ISL3285EIRTZ-T include low quiescent current, thermal shutdown protection, and ±15kV ESD protection on RS-485 I/O pins.

  5. Can ISL3285EIRTZ-T be used in harsh industrial environments?

    • Yes, ISL3285EIRTZ-T is designed to operate in harsh industrial environments with its rugged construction and ESD protection.

  6. What is the typical application of ISL3285EIRTZ-T?

    • ISL3285EIRTZ-T is commonly used in industrial automation, process control, and motor control systems for reliable data transmission.

  7. Does ISL3285EIRTZ-T support half-duplex and full-duplex communication?

    • Yes, ISL3285EIRTZ-T supports both half-duplex and full-duplex communication modes, providing flexibility in system design.

  8. What is the maximum common-mode voltage range of ISL3285EIRTZ-T?

    • The maximum common-mode voltage range of ISL3285EIRTZ-T is -7V to +12V, allowing for robust communication in noisy environments.

  9. Is ISL3285EIRTZ-T compatible with standard RS-485 and RS-422 protocols?

    • Yes, ISL3285EIRTZ-T is fully compatible with standard RS-485 and RS-422 protocols, ensuring interoperability with existing systems.

  10. Are there any specific layout considerations when using ISL3285EIRTZ-T?

    • Yes, proper PCB layout and grounding practices should be followed to optimize the performance and ESD protection of ISL3285EIRTZ-T.