Intersil
Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
HIP2123FRTAZ
Lihat Detail Lembar Data

HIP2123FRTAZ

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Power Management
  • Characteristics: High-performance, high-efficiency power controller
  • Package: TO-220
  • Essence: Regulates and controls power supply in various applications
  • Packaging/Quantity: Available in tape and reel packaging, quantity varies based on supplier

Specifications

  • Input Voltage Range: 4.5V to 60V
  • Output Voltage Range: 0.8V to 55V
  • Maximum Output Current: 3A
  • Switching Frequency: Up to 2MHz
  • Operating Temperature Range: -40°C to +125°C

Detailed Pin Configuration

The HIP2123FRTAZ has a total of 8 pins:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. VCC: Supply voltage pin
  4. BOOT: Bootstrap capacitor connection pin
  5. HO: High-side gate driver output pin
  6. LO: Low-side gate driver output pin
  7. FB: Feedback pin for voltage regulation
  8. EN: Enable pin for turning the device on/off

Functional Features

  • High efficiency power conversion
  • Wide input voltage range
  • Adjustable output voltage
  • Overcurrent protection
  • Thermal shutdown protection
  • Fast transient response

Advantages and Disadvantages

Advantages: - High-performance power control - Wide input voltage range allows for versatile applications - Efficient power conversion reduces energy loss - Comprehensive protection features ensure safe operation

Disadvantages: - Limited maximum output current may not be suitable for high-power applications - Requires external components for proper operation

Working Principles

The HIP2123FRTAZ is a power controller IC that regulates and controls the power supply in various applications. It operates by converting the input voltage to a regulated output voltage using a high-frequency switching technique. The device utilizes a high-side and low-side gate driver to control the power switches, ensuring efficient power conversion. It also incorporates protection features such as overcurrent and thermal shutdown to safeguard the system.

Detailed Application Field Plans

The HIP2123FRTAZ is commonly used in the following applications:

  1. Power supplies for industrial equipment
  2. Automotive electronics
  3. Telecommunications systems
  4. LED lighting
  5. Battery charging circuits

Detailed and Complete Alternative Models

  1. HIP2100: Similar functionality with lower maximum output current
  2. HIP2130: Higher maximum output current with additional features
  3. HIP2140: Dual-channel power controller with enhanced protection features

These alternative models offer similar functionality to the HIP2123FRTAZ but may have different specifications or additional features based on specific application requirements.

In conclusion, the HIP2123FRTAZ is a high-performance power controller IC designed for various applications. Its wide input voltage range, adjustable output voltage, and comprehensive protection features make it suitable for diverse power management needs. However, its limited maximum output current and external component requirement should be considered when selecting the appropriate model for specific applications.

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan HIP2123FRTAZ dalam solusi teknis

Sure! Here are 10 common questions and answers related to the application of HIP2123FRTAZ in technical solutions:

  1. Q: What is HIP2123FRTAZ? A: HIP2123FRTAZ is a high-frequency, half-bridge gate driver IC designed for driving MOSFETs and IGBTs in various power applications.

  2. Q: What is the maximum operating voltage of HIP2123FRTAZ? A: The maximum operating voltage of HIP2123FRTAZ is typically around 100V.

  3. Q: Can HIP2123FRTAZ be used with both MOSFETs and IGBTs? A: Yes, HIP2123FRTAZ can be used with both MOSFETs and IGBTs as it provides the necessary drive signals for both types of devices.

  4. Q: What is the typical switching frequency range supported by HIP2123FRTAZ? A: HIP2123FRTAZ supports a wide range of switching frequencies, typically from a few kilohertz up to several megahertz.

  5. Q: Does HIP2123FRTAZ have built-in protection features? A: Yes, HIP2123FRTAZ includes various protection features such as under-voltage lockout (UVLO), over-current protection (OCP), and thermal shutdown.

  6. Q: Can HIP2123FRTAZ operate in a high-temperature environment? A: Yes, HIP2123FRTAZ is designed to operate reliably in high-temperature environments, typically up to 125°C.

  7. Q: What is the input voltage range for HIP2123FRTAZ? A: The input voltage range for HIP2123FRTAZ is typically between 9V and 15V.

  8. Q: Can HIP2123FRTAZ be used in automotive applications? A: Yes, HIP2123FRTAZ is suitable for automotive applications as it meets the necessary requirements such as AEC-Q100 qualification.

  9. Q: Does HIP2123FRTAZ support adjustable dead-time control? A: Yes, HIP2123FRTAZ provides adjustable dead-time control to optimize the switching characteristics of the power devices.

  10. Q: What package options are available for HIP2123FRTAZ? A: HIP2123FRTAZ is available in various package options, including SOIC-8 and DFN-8, providing flexibility for different PCB layouts and space constraints.

Please note that the answers provided here are general and may vary depending on the specific datasheet and application requirements of HIP2123FRTAZ.