Infineon Technologies
Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
TLE62582GNTMA1

TLE62582GNTMA1

Product Overview

Category

TLE62582GNTMA1 belongs to the category of automotive electronic components.

Use

This product is primarily used in automotive applications for communication and control purposes.

Characteristics

  • High reliability and durability
  • Wide operating temperature range
  • Low power consumption
  • Compact size

Package

TLE62582GNTMA1 is available in a small surface-mount package, which ensures easy integration into automotive systems.

Essence

The essence of TLE62582GNTMA1 lies in its ability to provide reliable and efficient communication between various electronic modules within a vehicle.

Packaging/Quantity

This product is typically packaged in reels or trays, with a quantity of 2500 units per reel/tray.

Specifications

  • Supply voltage: 5V
  • Operating temperature range: -40°C to +125°C
  • Data rate: up to 1 Mbps
  • Number of channels: 2
  • ESD protection: ±4 kV HBM

Detailed Pin Configuration

TLE62582GNTMA1 features the following pin configuration:

| Pin Number | Pin Name | Function | |------------|----------|----------| | 1 | VBAT | Battery supply voltage | | 2 | GND | Ground | | 3 | TXD | Transmit data | | 4 | RXD | Receive data | | 5 | EN | Enable input | | 6 | WAKE | Wake-up input | | 7 | CANL | CAN low-level input/output | | 8 | CANH | CAN high-level input/output |

Functional Features

  • High-speed CAN transceiver
  • Supports CAN protocol version 2.0B
  • Integrated bus termination resistor
  • Sleep mode for low power consumption
  • Wake-up capability for remote activation

Advantages and Disadvantages

Advantages

  • Robust communication in automotive environments
  • High data rate for efficient data transfer
  • Integrated termination resistor simplifies system design
  • Low power consumption for energy efficiency

Disadvantages

  • Limited number of channels (2)
  • Requires external microcontroller for complete functionality

Working Principles

TLE62582GNTMA1 operates based on the CAN (Controller Area Network) protocol. It receives and transmits data using differential signaling, ensuring reliable communication even in noisy automotive environments. The integrated termination resistor helps to minimize signal reflections and improve signal integrity.

Detailed Application Field Plans

TLE62582GNTMA1 finds extensive application in various automotive systems, including:

  1. Engine control units (ECUs)
  2. Transmission control units (TCUs)
  3. Body control modules (BCMs)
  4. Anti-lock braking systems (ABS)
  5. Airbag control units (ACUs)

Detailed and Complete Alternative Models

  1. TLE62580GNTMA1: Similar to TLE62582GNTMA1 but with 1 channel instead of 2.
  2. TLE62585GNTMA1: Enhanced version with additional features such as fault detection and diagnostics.

These alternative models offer similar functionality and can be considered as substitutes for TLE62582GNTMA1 depending on specific requirements.

Word count: 437 words

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan TLE62582GNTMA1 dalam solusi teknis

Sure! Here are 10 common questions and answers related to the application of TLE62582GNTMA1 in technical solutions:

Q1: What is TLE62582GNTMA1? A1: TLE62582GNTMA1 is a high-speed CAN transceiver designed for automotive applications.

Q2: What is the operating voltage range of TLE62582GNTMA1? A2: The operating voltage range of TLE62582GNTMA1 is typically between 4.5V and 5.5V.

Q3: What is the maximum data rate supported by TLE62582GNTMA1? A3: TLE62582GNTMA1 supports a maximum data rate of up to 5 Mbps.

Q4: Can TLE62582GNTMA1 be used in harsh automotive environments? A4: Yes, TLE62582GNTMA1 is designed to operate reliably in harsh automotive environments, with features like ESD protection and high electromagnetic immunity.

Q5: Does TLE62582GNTMA1 support bus wake-up functionality? A5: Yes, TLE62582GNTMA1 supports bus wake-up functionality, allowing it to wake up from low-power modes when a valid wake-up pattern is detected on the bus.

Q6: What is the thermal shutdown feature of TLE62582GNTMA1? A6: TLE62582GNTMA1 has a built-in thermal shutdown feature that protects the device from overheating by disabling the output drivers when the junction temperature exceeds a certain threshold.

Q7: Can TLE62582GNTMA1 be used in multi-node CAN networks? A7: Yes, TLE62582GNTMA1 can be used in multi-node CAN networks, as it supports both CAN FD and Classical CAN protocols.

Q8: What is the maximum common-mode voltage range supported by TLE62582GNTMA1? A8: The maximum common-mode voltage range supported by TLE62582GNTMA1 is typically between -2V and +7V.

Q9: Does TLE62582GNTMA1 have built-in protection against bus faults? A9: Yes, TLE62582GNTMA1 has built-in protection features like thermal shutdown, short-circuit protection, and overvoltage protection to safeguard against bus faults.

Q10: Is TLE62582GNTMA1 compatible with other CAN transceivers? A10: Yes, TLE62582GNTMA1 is compatible with other CAN transceivers that comply with the CAN FD and Classical CAN protocols, allowing for easy integration into existing systems.

Please note that these answers are general and may vary depending on the specific application and requirements.