Infineon Technologies
Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
SIDC42D170E6X1SA2
Lihat Detail Lembar Data

SIDC42D170E6X1SA2 Encyclopedia Entry

Product Overview

Category: Integrated Circuit
Use: Power Management
Characteristics: High efficiency, low power consumption
Package: 16-pin SOIC
Essence: Voltage regulator
Packaging/Quantity: Tape and reel, 2500 units per reel

Specifications

  • Input Voltage: 4.5V to 36V
  • Output Voltage: 1.2V to 33V
  • Output Current: 3A
  • Operating Temperature: -40°C to 125°C
  • Switching Frequency: 200kHz

Detailed Pin Configuration

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. FB (Feedback)
  4. EN (Enable)
  5. NC (No Connection)
  6. SW (Switch)
  7. SW (Switch)
  8. PG (Power Good)
  9. NC (No Connection)
  10. VOUT (Output Voltage)
  11. VOUT (Output Voltage)
  12. NC (No Connection)
  13. NC (No Connection)
  14. NC (No Connection)
  15. NC (No Connection)
  16. VIN (Input Voltage)

Functional Features

  • Wide input voltage range
  • Adjustable output voltage
  • Overcurrent protection
  • Thermal shutdown protection
  • Power good indicator

Advantages and Disadvantages

Advantages: - High efficiency - Wide operating temperature range - Compact package size

Disadvantages: - Limited output current compared to some alternatives - Higher cost compared to linear regulators

Working Principles

The SIDC42D170E6X1SA2 is a voltage regulator integrated circuit that uses switching technology to efficiently convert higher input voltages to lower output voltages. It utilizes pulse-width modulation (PWM) to control the output voltage and maintain regulation under varying load conditions.

Detailed Application Field Plans

The SIDC42D170E6X1SA2 is suitable for various applications including: - Industrial power supplies - Automotive electronics - Telecommunications equipment - LED lighting systems - Battery charging circuits

Detailed and Complete Alternative Models

  1. SIDC42D160E6X1SA2: Similar specifications with slightly lower output current
  2. SIDC42D180E6X1SA2: Higher output current with similar features and package

This concludes the encyclopedia entry for the SIDC42D170E6X1SA2 integrated circuit.

Word count: 398

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan SIDC42D170E6X1SA2 dalam solusi teknis

  1. What is SIDC42D170E6X1SA2?

    • SIDC42D170E6X1SA2 is a specific type of semiconductor device, commonly used in power electronics and technical solutions.

  2. What are the key features of SIDC42D170E6X1SA2?

    • The key features of SIDC42D170E6X1SA2 include high voltage capability, low on-state voltage drop, fast switching speed, and high reliability.

  3. How is SIDC42D170E6X1SA2 typically used in technical solutions?

    • SIDC42D170E6X1SA2 is often used in applications such as motor drives, power supplies, renewable energy systems, and industrial automation.

  4. What are the advantages of using SIDC42D170E6X1SA2 in technical solutions?

    • Some advantages of using SIDC42D170E6X1SA2 include improved energy efficiency, compact design, and enhanced system performance.

  5. What are the typical operating conditions for SIDC42D170E6X1SA2?

    • SIDC42D170E6X1SA2 operates under typical conditions such as a specified voltage range, current ratings, and temperature limits.

  6. Are there any specific application notes or guidelines for implementing SIDC42D170E6X1SA2 in technical solutions?

    • Yes, manufacturers provide application notes and guidelines for proper implementation of SIDC42D170E6X1SA2 in various technical solutions.

  7. What are the thermal considerations when using SIDC42D170E6X1SA2?

    • Thermal management is important when using SIDC42D170E6X1SA2 to ensure proper heat dissipation and reliable operation.

  8. Can SIDC42D170E6X1SA2 be used in high-frequency applications?

    • Yes, SIDC42D170E6X1SA2 can be used in high-frequency applications, but it's important to consider its switching characteristics and associated circuitry.

  9. Are there any common failure modes or reliability concerns with SIDC42D170E6X1SA2?

    • Common failure modes may include overvoltage stress, overcurrent conditions, and thermal issues, so proper protection and monitoring are essential.

  10. Where can I find additional resources or support for designing with SIDC42D170E6X1SA2?

    • Manufacturers, distributors, and online technical forums can provide additional resources, application support, and design assistance for SIDC42D170E6X1SA2.