Infineon Technologies
Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
IRFR3711ZTRR
Lihat Detail Lembar Data

IRFR3711ZTRR

Product Overview

Category: Power MOSFET
Use: Switching applications in power supplies, motor control, and other high current applications
Characteristics: High voltage, low on-resistance, fast switching speed
Package: TO-252 (DPAK)
Essence: Power MOSFET for high current switching applications
Packaging/Quantity: Tape & Reel, 2500 units per reel

Specifications

  • Voltage Rating: 100V
  • Continuous Drain Current: 57A
  • RDS(ON): 8.5mΩ
  • Gate Threshold Voltage: 2V to 4V
  • Total Gate Charge: 45nC
  • Operating Temperature Range: -55°C to 175°C

Pin Configuration

  1. Gate
  2. Drain
  3. Source

Functional Features

  • Fast switching speed for efficient power conversion
  • Low on-resistance for minimal power loss
  • High voltage rating for versatile applications

Advantages

  • High current handling capability
  • Low on-resistance for reduced power dissipation
  • Wide operating temperature range

Disadvantages

  • Sensitive to static electricity
  • Gate drive voltage needs to be carefully controlled to avoid damage

Working Principles

The IRFR3711ZTRR operates based on the principles of a Metal-Oxide-Semiconductor Field-Effect Transistor (MOSFET). When a voltage is applied to the gate terminal, it creates an electric field that controls the conductivity between the drain and source terminals, allowing for efficient switching of high currents.

Application Field Plans

This MOSFET is suitable for use in various applications including: - Power supplies - Motor control - DC-DC converters - Inverters

Alternative Models

  • IRF3711ZS (similar specifications)
  • IRFB4110PBF (higher voltage rating)
  • IRF3205 (lower on-resistance)

In conclusion, the IRFR3711ZTRR is a high-performance power MOSFET designed for demanding switching applications where high current handling, low on-resistance, and fast switching speed are essential.

[Word Count: 271]

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan IRFR3711ZTRR dalam solusi teknis

  1. What is the IRFR3711ZTRR?

    • The IRFR3711ZTRR is a power MOSFET designed for various electronic applications, including power supplies, motor control, and lighting.

  2. What is the maximum drain-source voltage of the IRFR3711ZTRR?

    • The maximum drain-source voltage of the IRFR3711ZTRR is 20V.

  3. What is the continuous drain current rating of the IRFR3711ZTRR?

    • The continuous drain current rating of the IRFR3711ZTRR is 57A.

  4. What is the on-state resistance (RDS(on)) of the IRFR3711ZTRR?

    • The on-state resistance of the IRFR3711ZTRR is typically around 5.5 milliohms.

  5. Can the IRFR3711ZTRR be used in high-frequency switching applications?

    • Yes, the IRFR3711ZTRR is suitable for high-frequency switching due to its low RDS(on) and fast switching characteristics.

  6. What are the typical applications of the IRFR3711ZTRR?

    • Typical applications include DC-DC converters, motor drives, uninterruptible power supplies (UPS), and synchronous rectification.

  7. Does the IRFR3711ZTRR have built-in protection features?

    • The IRFR3711ZTRR does not have built-in protection features and may require external circuitry for overcurrent or overvoltage protection.

  8. What is the operating temperature range of the IRFR3711ZTRR?

    • The IRFR3711ZTRR is rated for operation over a temperature range of -55°C to 175°C.

  9. Is the IRFR3711ZTRR RoHS compliant?

    • Yes, the IRFR3711ZTRR is RoHS compliant, making it suitable for use in environmentally sensitive applications.

  10. Are there any recommended thermal management guidelines for using the IRFR3711ZTRR?

    • It is recommended to use proper heat sinking and thermal management techniques to ensure the IRFR3711ZTRR operates within its specified temperature limits.