Infineon Technologies
Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
IRFM460
Lihat Detail Lembar Data

IRFM460

Product Overview

Category: Power MOSFET
Use: Switching applications in power supplies and motor control
Characteristics: High voltage, high speed switching, low on-resistance
Package: TO-220AB
Essence: Power MOSFET for efficient switching
Packaging/Quantity: Typically sold in reels of 1000 units

Specifications

  • Voltage Rating: 500V
  • Continuous Drain Current: 20A
  • RDS(ON): 0.27 Ohms
  • Gate Threshold Voltage: 2V to 4V
  • Power Dissipation: 150W

Detailed Pin Configuration

  1. Gate (G)
  2. Drain (D)
  3. Source (S)

Functional Features

  • Fast switching speed
  • Low gate drive power
  • High input impedance
  • Avalanche energy specified
  • Improved dv/dt capability

Advantages and Disadvantages

Advantages: - Low on-resistance - High input impedance - Fast switching speed - Low gate drive power

Disadvantages: - Higher capacitance compared to some alternatives - Sensitivity to over-voltage conditions

Working Principles

The IRFM460 is a power MOSFET that operates based on the principle of field-effect. When a voltage is applied to the gate terminal, it creates an electric field which controls the flow of current between the drain and source terminals.

Detailed Application Field Plans

The IRFM460 is commonly used in: - Switched-mode power supplies - Motor control circuits - Inverters - DC-DC converters

Detailed and Complete Alternative Models

  1. IRF540 - Similar voltage and current ratings
  2. IRFP460 - Higher current rating
  3. IRFB4110 - Lower on-resistance

In conclusion, the IRFM460 is a high-voltage power MOSFET designed for efficient switching in various applications such as power supplies and motor control circuits. Its fast switching speed, low on-resistance, and high input impedance make it suitable for demanding applications where efficiency and performance are crucial.

[Word count: 298]

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan IRFM460 dalam solusi teknis

  1. What is the IRFM460 transistor used for?

    • The IRFM460 is commonly used as a power MOSFET in various electronic applications, such as motor control, power supplies, and lighting systems.

  2. What are the key specifications of the IRFM460?

    • The IRFM460 has a maximum drain-source voltage of 500V, a continuous drain current of 18A, and a low on-resistance for efficient power handling.

  3. How do I properly drive the IRFM460 in my circuit?

    • To drive the IRFM460 effectively, ensure that the gate voltage is within the specified range (typically around 10V) to fully turn on the transistor and minimize switching losses.

  4. Can the IRFM460 be used in high-frequency applications?

    • While the IRFM460 can operate at moderate frequencies, it is more suitable for medium to low frequency applications due to its inherent capacitance and switching characteristics.

  5. What are the typical thermal considerations when using the IRFM460?

    • Proper heat sinking and thermal management are crucial when using the IRFM460 to ensure that it operates within its temperature limits and maintains reliability.

  6. Are there any common failure modes associated with the IRFM460?

    • Overheating due to inadequate thermal management and exceeding the maximum ratings for voltage or current are common causes of failure for the IRFM460.

  7. Can the IRFM460 be used in automotive applications?

    • Yes, the IRFM460 is suitable for certain automotive applications, particularly in power management and control systems within vehicles.

  8. What are some typical protection measures for the IRFM460 in a circuit?

    • Implementing overcurrent protection, overvoltage protection, and ensuring proper gate driving techniques are important for safeguarding the IRFM460 in a circuit.

  9. How does the IRFM460 compare to other similar transistors in terms of performance?

    • The IRFM460 offers a good balance of voltage, current, and on-resistance compared to similar transistors, making it a popular choice for various technical solutions.

  10. Where can I find detailed application notes and reference designs for using the IRFM460?

    • Detailed application notes and reference designs for the IRFM460 can be found on the manufacturer's website, as well as in technical literature and engineering forums dedicated to power electronics.