IRFHM792TRPBF

Product Overview

Use

It is used for high-frequency switching applications in power supplies, motor control, and other power management systems.

Characteristics

High voltage capability
Low on-resistance
Fast switching speed
Low gate charge

Package

The IRFHM792TRPBF comes in a TO-263 package.

Essence

This MOSFET is essential for efficient power management and control in various electronic systems.

Packaging/Quantity

It is typically packaged in reels with a quantity of 800 units per reel.

Specifications

Drain-Source Voltage (VDS): 100V
Continuous Drain Current (ID): 100A
RDS(ON) (Max) @ VGS = 10V: 3.7mΩ
Gate-Source Voltage (VGS): ±20V
Total Gate Charge (Qg): 68nC
Operating Temperature Range: -55°C to 175°C

Detailed Pin Configuration

The IRFHM792TRPBF has three pins: 1. Gate (G) 2. Drain (D) 3. Source (S)

Functional Features

Low conduction losses
Reduced switching losses
Enhanced thermal performance
High efficiency

Advantages

Suitable for high-frequency switching
Low power dissipation
Improved system reliability
Compact design

Disadvantages

Sensitive to static electricity
Requires careful handling during installation

Working Principles

The IRFHM792TRPBF operates based on the principles of field-effect transistors, utilizing its low on-resistance and fast switching speed to efficiently control power flow in electronic circuits.

Detailed Application Field Plans

This MOSFET is widely used in: - Switch-mode power supplies - Motor drives - DC-DC converters - Inverters - Battery management systems

Detailed and Complete Alternative Models

IRFH7921TRPBF
IRFHM7920TRPBF
IRFHM7925TRPBF
IRFHM7930TRPBF

In conclusion, the IRFHM792TRPBF power MOSFET offers high-performance characteristics suitable for various power management applications, providing efficient power control and reliability in electronic systems.

[Word Count: 314]

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan IRFHM792TRPBF dalam solusi teknis

What is IRFHM792TRPBF?
- IRFHM792TRPBF is a power MOSFET transistor designed for use in various technical solutions, such as power management and motor control applications.
What is the maximum voltage and current rating of IRFHM792TRPBF?
- The maximum voltage rating is typically around 100V, and the maximum continuous drain current is approximately 100A.
What are the typical applications of IRFHM792TRPBF?
- IRFHM792TRPBF is commonly used in applications such as DC-DC converters, motor drives, and power supplies.
What is the on-resistance of IRFHM792TRPBF?
- The on-resistance (RDS(on)) of IRFHM792TRPBF is typically very low, around a few milliohms, which makes it suitable for high-efficiency power management solutions.
Does IRFHM792TRPBF require a heat sink for operation?
- Depending on the specific application and power dissipation requirements, IRFHM792TRPBF may require a heat sink to maintain optimal operating temperatures.
Is IRFHM792TRPBF suitable for automotive applications?
- Yes, IRFHM792TRPBF is often used in automotive systems due to its high current handling capability and robust design.
What are the thermal characteristics of IRFHM792TRPBF?
- The thermal resistance from junction to case (RθJC) and from junction to ambient (RθJA) are important parameters to consider for thermal management in technical solutions.
Can IRFHM792TRPBF be used in switching applications?
- Yes, IRFHM792TRPBF can be utilized in high-frequency switching applications due to its fast switching speed and low on-resistance.
Are there any recommended gate drive voltage levels for IRFHM792TRPBF?
- It is important to refer to the datasheet for specific gate drive voltage recommendations to ensure proper performance and reliability.
What are the key differences between IRFHM792TRPBF and similar MOSFETs in the market?
- Understanding the unique features, performance characteristics, and reliability specifications of IRFHM792TRPBF compared to other MOSFETs is crucial for selecting the most suitable component for a given technical solution.