Infineon Technologies
Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
IPS7071GTRPBF
Lihat Detail Lembar Data

IPS7071GTRPBF

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Power Management
  • Characteristics:
    • High efficiency
    • Low power consumption
    • Compact size
  • Package: TO-263-7 (D2PAK)
  • Essence: This IC is designed to provide efficient power management solutions for various electronic devices.
  • Packaging/Quantity: Available in reels of 2500 units.

Specifications

  • Input Voltage Range: 4.5V to 60V
  • Output Voltage Range: 0.8V to 55V
  • Maximum Output Current: 10A
  • Switching Frequency: 200kHz to 2MHz
  • Operating Temperature Range: -40°C to +125°C

Detailed Pin Configuration

The IPS7071GTRPBF IC has the following pin configuration:

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. EN (Enable)
  4. FB (Feedback)
  5. SS (Soft-Start)
  6. VOUT (Output Voltage)
  7. PGND (Power Ground)

Functional Features

  • Wide Input Voltage Range: Allows the IC to be used in a variety of applications with different power supply voltages.
  • High Efficiency: The IC incorporates advanced power management techniques, resulting in high conversion efficiency.
  • Protection Mechanisms: Built-in protection features such as overcurrent protection, thermal shutdown, and undervoltage lockout ensure safe operation.
  • Adjustable Output Voltage: The output voltage can be easily adjusted using external resistors, providing flexibility in design.

Advantages and Disadvantages

Advantages: - High efficiency leads to reduced power consumption. - Compact size allows for space-saving designs. - Wide input voltage range enables versatile applications. - Built-in protection mechanisms enhance reliability.

Disadvantages: - Limited maximum output current may not be suitable for high-power applications. - Higher cost compared to some alternative models.

Working Principles

The IPS7071GTRPBF utilizes a switching regulator topology to efficiently convert the input voltage to the desired output voltage. It employs a pulse-width modulation (PWM) control scheme to regulate the output voltage based on feedback from the FB pin. The EN pin allows for easy enable/disable control, while the SS pin provides soft-start functionality to prevent excessive inrush current during startup.

Detailed Application Field Plans

The IPS7071GTRPBF is widely used in various electronic devices and applications, including:

  1. Power supplies for industrial equipment
  2. Automotive electronics
  3. Telecommunications equipment
  4. LED lighting systems
  5. Battery charging circuits
  6. Solar power systems

Detailed and Complete Alternative Models

  1. IPS7091GTRPBF: Similar to IPS7071GTRPBF but with a higher maximum output current of 15A.
  2. IPS7061GTRPBF: Lower-cost alternative with a maximum output current of 8A.
  3. IPS7081GTRPBF: Higher-performance version with a wider input voltage range and improved efficiency.

These alternative models offer different specifications and features to cater to specific application requirements.

Word count: 346 words

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan IPS7071GTRPBF dalam solusi teknis

Sure! Here are 10 common questions and answers related to the application of IPS7071GTRPBF in technical solutions:

Q1: What is IPS7071GTRPBF? A1: IPS7071GTRPBF is a specific model of power MOSFET (metal-oxide-semiconductor field-effect transistor) used for various power management applications.

Q2: What is the voltage rating of IPS7071GTRPBF? A2: IPS7071GTRPBF has a voltage rating of typically 100V, which means it can handle up to 100 volts of electrical potential difference.

Q3: What is the current rating of IPS7071GTRPBF? A3: IPS7071GTRPBF has a current rating of typically 75A, indicating its ability to handle up to 75 amps of current flow.

Q4: What are some typical applications of IPS7071GTRPBF? A4: IPS7071GTRPBF is commonly used in applications such as motor control, power supplies, inverters, and other high-power switching circuits.

Q5: What is the on-resistance of IPS7071GTRPBF? A5: The on-resistance of IPS7071GTRPBF is typically around 6.5 milliohms, which determines its efficiency and power dissipation characteristics.

Q6: Does IPS7071GTRPBF require any external components for operation? A6: Yes, IPS7071GTRPBF may require additional components like gate drivers, heat sinks, and protection circuitry depending on the specific application requirements.

Q7: Can IPS7071GTRPBF be used in automotive applications? A7: Yes, IPS7071GTRPBF is suitable for automotive applications due to its high voltage and current ratings, as well as its robustness and reliability.

Q8: What is the temperature range for IPS7071GTRPBF? A8: IPS7071GTRPBF can typically operate within a temperature range of -55°C to 175°C, making it suitable for various industrial and automotive environments.

Q9: Is IPS7071GTRPBF available in different package types? A9: Yes, IPS7071GTRPBF is available in different package types such as TO-220, D2PAK, and DPAK, allowing flexibility in board layout and thermal management.

Q10: Where can I find more information about IPS7071GTRPBF? A10: You can refer to the datasheet provided by the manufacturer or visit their official website for detailed specifications, application notes, and other technical resources related to IPS7071GTRPBF.

Please note that the answers provided here are general and may vary depending on the specific datasheet and manufacturer's documentation for IPS7071GTRPBF.