Infineon Technologies
Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
IPP030N10N5AKSA1
Lihat Detail Lembar Data

IPP030N10N5AKSA1

Product Overview

Category: Power MOSFET
Use: Switching applications in power supplies, motor control, and other high-current applications
Characteristics: High current handling capability, low on-resistance, fast switching speed
Package: TO-220
Essence: Power MOSFET for efficient power management
Packaging/Quantity: Tape and reel, 800 units per reel

Specifications

  • Voltage Rating: 100V
  • Current Rating: 50A
  • On-Resistance: 3.0mΩ
  • Gate Charge: 30nC
  • Operating Temperature Range: -55°C to 175°C

Detailed Pin Configuration

  1. Gate (G)
  2. Drain (D)
  3. Source (S)

Functional Features

  • Low on-resistance for minimal power dissipation
  • Fast switching speed for improved efficiency
  • High current handling capability for robust performance

Advantages and Disadvantages

Advantages: - Efficient power management - Suitable for high-current applications - Fast switching speed

Disadvantages: - Higher cost compared to standard MOSFETs - Requires careful handling due to high current capabilities

Working Principles

IPP030N10N5AKSA1 operates based on the principle of field-effect transistors, where the voltage applied to the gate terminal controls the flow of current between the drain and source terminals. When a sufficient voltage is applied to the gate, the MOSFET allows current to flow through, enabling efficient power switching.

Detailed Application Field Plans

This Power MOSFET is ideal for use in various applications including: - Power supplies - Motor control systems - DC-DC converters - Inverters - Battery management systems

Detailed and Complete Alternative Models

  1. IRF540N
  2. FDP8870
  3. STP55NF06L
  4. IRLB8748

Note: The alternative models listed above are comparable in terms of specifications and application suitability.

This comprehensive entry provides an in-depth understanding of IPP030N10N5AKSA1, covering its basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, detailed application field plans, and alternative models.

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan IPP030N10N5AKSA1 dalam solusi teknis

  1. What is the maximum drain-source voltage rating of IPP030N10N5AKSA1?

    • The maximum drain-source voltage rating of IPP030N10N5AKSA1 is 100V.

  2. What is the continuous drain current rating of IPP030N10N5AKSA1?

    • The continuous drain current rating of IPP030N10N5AKSA1 is 50A.

  3. What is the on-state resistance (RDS(on)) of IPP030N10N5AKSA1?

    • The on-state resistance (RDS(on)) of IPP030N10N5AKSA1 is typically 0.003 ohms.

  4. Can IPP030N10N5AKSA1 be used in automotive applications?

    • Yes, IPP030N10N5AKSA1 is suitable for use in automotive applications.

  5. What is the operating temperature range of IPP030N10N5AKSA1?

    • IPP030N10N5AKSA1 has an operating temperature range of -55°C to 175°C.

  6. Is IPP030N10N5AKSA1 RoHS compliant?

    • Yes, IPP030N10N5AKSA1 is RoHS compliant.

  7. Does IPP030N10N5AKSA1 require a heat sink for proper operation?

    • Depending on the application and power dissipation, a heat sink may be required for IPP030N10N5AKSA1.

  8. What are the typical applications for IPP030N10N5AKSA1?

    • Typical applications for IPP030N10N5AKSA1 include motor control, power supplies, and DC-DC converters.

  9. What is the gate threshold voltage of IPP030N10N5AKSA1?

    • The gate threshold voltage of IPP030N10N5AKSA1 is typically 2.5V.

  10. Is IPP030N10N5AKSA1 suitable for high-frequency switching applications?

    • Yes, IPP030N10N5AKSA1 is suitable for high-frequency switching applications due to its low RDS(on) and fast switching characteristics.