Lihat spesifikasi untuk detail produk.
IPI80N04S304AKSA1
Product Overview
- Category: Power MOSFET
- Use: This MOSFET is used for power management and switching applications in various electronic devices and systems.
- Characteristics: High power handling capacity, low on-state resistance, fast switching speed, and high efficiency.
- Package: TO-220AB
- Essence: The IPI80N04S304AKSA1 is essential for efficient power control and management in electronic circuits.
- Packaging/Quantity: Typically packaged in reels or tubes, with varying quantities depending on the supplier.
Specifications
- Voltage Rating: 40V
- Current Rating: 80A
- On-State Resistance (RDS(on)): 3.4mΩ
- Gate Threshold Voltage: 2V
- Operating Temperature Range: -55°C to 175°C
Detailed Pin Configuration
The IPI80N04S304AKSA1 follows the standard pin configuration for a TO-220AB package: 1. Gate (G) 2. Drain (D) 3. Source (S)
Functional Features
- High current-carrying capability
- Low conduction losses
- Fast switching speed
- Enhanced thermal performance
Advantages and Disadvantages
- Advantages:
- High power handling capacity
- Low on-state resistance
- Efficient power management
- Fast switching speed
- Disadvantages:
- Sensitive to static electricity
- Requires careful handling during assembly
Working Principles
The MOSFET operates based on the principle of field-effect. When a voltage is applied to the gate terminal, it creates an electric field that controls the flow of current between the drain and source terminals.
Detailed Application Field Plans
The IPI80N04S304AKSA1 is widely used in: - Switching power supplies - Motor control systems - Battery management systems - LED lighting applications - Audio amplifiers
Detailed and Complete Alternative Models
- Alternative Model 1: IRF840
- Voltage Rating: 500V
- Current Rating: 8A
- On-State Resistance: 0.85Ω
- Alternative Model 2: FDP7030L
- Voltage Rating: 100V
- Current Rating: 60A
- On-State Resistance: 7.5mΩ
This completes the entry for the IPI80N04S304AKSA1 according to the English editing encyclopedia structure format.
Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan IPI80N04S304AKSA1 dalam solusi teknis
What is the maximum drain current of IPI80N04S304AKSA1?
- The maximum drain current of IPI80N04S304AKSA1 is 80A.
What is the maximum voltage rating of IPI80N04S304AKSA1?
- The maximum voltage rating of IPI80N04S304AKSA1 is 40V.
What type of package does IPI80N04S304AKSA1 come in?
- IPI80N04S304AKSA1 comes in a TO-220 package.
What are the typical applications for IPI80N04S304AKSA1?
- IPI80N04S304AKSA1 is commonly used in power management, motor control, and other high-current switching applications.
What is the on-resistance of IPI80N04S304AKSA1?
- The on-resistance of IPI80N04S304AKSA1 is typically 8.5mΩ.
Is IPI80N04S304AKSA1 suitable for automotive applications?
- Yes, IPI80N04S304AKSA1 is suitable for automotive applications due to its high current handling capability and rugged construction.
Does IPI80N04S304AKSA1 require a heatsink for operation?
- It is recommended to use a heatsink with IPI80N04S304AKSA1, especially in high-power applications, to ensure optimal thermal performance.
What is the gate threshold voltage of IPI80N04S304AKSA1?
- The gate threshold voltage of IPI80N04S304AKSA1 is typically 2V.
Can IPI80N04S304AKSA1 be used in parallel to handle higher currents?
- Yes, IPI80N04S304AKSA1 can be used in parallel to increase the current-handling capacity in high-power applications.
Are there any specific layout considerations for using IPI80N04S304AKSA1 in a PCB design?
- It is important to minimize the length and impedance of the traces connecting IPI80N04S304AKSA1 to the rest of the circuit to reduce parasitic effects and ensure proper performance.