Infineon Technologies
Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
IDD04SG60CXTMA2
Lihat Detail Lembar Data

IDD04SG60CXTMA2

Product Overview

Category: Integrated Circuit
Use: Power Management IC
Characteristics: High efficiency, low power consumption
Package: 16-pin TSSOP
Essence: Regulates and manages power supply
Packaging/Quantity: Tape & Reel, 2500 units per reel

Specifications

  • Input Voltage: 4.5V to 36V
  • Output Voltage: Adjustable from 0.6V to 33V
  • Output Current: Up to 4A
  • Switching Frequency: 500kHz
  • Operating Temperature: -40°C to 125°C

Detailed Pin Configuration

  1. VIN (Input Voltage)
  2. PGND (Power Ground)
  3. SW (Switch Node)
  4. FB (Feedback)
  5. COMP (Compensation)
  6. SS/TRK (Soft Start/Tracking)
  7. EN (Enable)
  8. VOUT (Output Voltage)
  9. AGND (Analog Ground)

Functional Features

  • Wide input voltage range
  • Adjustable output voltage
  • Overcurrent protection
  • Thermal shutdown
  • Soft start for controlled startup

Advantages and Disadvantages

Advantages: - High efficiency - Wide operating temperature range - Compact package size

Disadvantages: - Limited output current compared to some alternatives - Requires external components for certain functions

Working Principles

The IDD04SG60CXTMA2 is a buck regulator that converts high input voltage to a lower output voltage with high efficiency. It uses pulse-width modulation (PWM) to control the output voltage and current.

Detailed Application Field Plans

This IC is suitable for various applications including: - Industrial power supplies - Automotive electronics - Battery-powered devices - LED lighting systems

Detailed and Complete Alternative Models

  1. IDD05SG70CXTMA2

    • Higher output current (up to 5A)
    • Same package and pin configuration
    • Slightly higher cost

  2. IDD03SG50CXTMA2

    • Lower output current (up to 3A)
    • Same package and pin configuration
    • Lower cost

  3. IDD04SG60CXTMB2

    • Different package (QFN)
    • Similar specifications and features
    • Suitable for space-constrained designs

In conclusion, the IDD04SG60CXTMA2 is a versatile power management IC with a wide range of applications and several alternative models available to suit specific requirements.

[Word count: 324]

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan IDD04SG60CXTMA2 dalam solusi teknis

  1. What is IDD04SG60CXTMA2?

    • IDD04SG60CXTMA2 is a specific model of semiconductor diode, commonly used in power electronics and technical solutions.

  2. What are the key specifications of IDD04SG60CXTMA2?

    • IDD04SG60CXTMA2 typically has a forward current rating of 4A, a reverse voltage rating of 600V, and is designed for use in high-temperature environments.

  3. In what technical applications is IDD04SG60CXTMA2 commonly used?

    • IDD04SG60CXTMA2 is frequently utilized in power supplies, motor drives, and other industrial equipment due to its high current and voltage capabilities.

  4. What are the advantages of using IDD04SG60CXTMA2 in technical solutions?

    • IDD04SG60CXTMA2 offers low forward voltage drop, fast switching speed, and high temperature stability, making it suitable for demanding applications.

  5. How does IDD04SG60CXTMA2 compare to similar diodes in terms of performance?

    • Compared to similar diodes, IDD04SG60CXTMA2 may offer lower forward voltage drop, higher current ratings, or improved thermal characteristics, depending on the specific application.

  6. Are there any specific considerations for integrating IDD04SG60CXTMA2 into a technical design?

    • Designers should consider heat dissipation, voltage transients, and current surges when integrating IDD04SG60CXTMA2 into their circuits to ensure reliable operation.

  7. What are the typical operating conditions for IDD04SG60CXTMA2?

    • IDD04SG60CXTMA2 is designed to operate within a wide temperature range, typically from -40°C to 150°C, and can handle high current and voltage levels within specified limits.

  8. Can IDD04SG60CXTMA2 be used in automotive applications?

    • Yes, IDD04SG60CXTMA2 is suitable for automotive systems such as electric vehicle powertrains, battery management, and charging systems due to its robustness and high-temperature tolerance.

  9. Is IDD04SG60CXTMA2 available in different package types?

    • Yes, IDD04SG60CXTMA2 is available in various package types such as TO-252, DPAK, or D2PAK, providing flexibility for different mounting and assembly requirements.

  10. Where can I find detailed technical information and application notes for IDD04SG60CXTMA2?

    • Detailed technical information, datasheets, and application notes for IDD04SG60CXTMA2 can be obtained from semiconductor manufacturers' websites or authorized distributors.