Infineon Technologies
Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
ICE3BR1065JXKLA1
Lihat Detail Lembar Data

ICE3BR1065JXKLA1

Product Overview

Category

The ICE3BR1065JXKLA1 belongs to the category of integrated circuits (ICs).

Use

This product is primarily used in power supply applications, specifically for offline switch mode power supplies (SMPS).

Characteristics

  • The ICE3BR1065JXKLA1 is a highly efficient and compact IC designed for power conversion.
  • It offers excellent performance in terms of energy efficiency and reliability.
  • This IC incorporates various protection features such as overvoltage protection, overload protection, and overtemperature protection.
  • It operates at high frequencies, enabling smaller and lighter power supply designs.

Package

The ICE3BR1065JXKLA1 is available in a compact and industry-standard DIP-7 package.

Essence

The essence of this product lies in its ability to efficiently convert power in offline SMPS applications while ensuring reliable operation and incorporating essential protection features.

Packaging/Quantity

The ICE3BR1065JXKLA1 is typically packaged in reels or tubes, with a quantity of 1000 units per reel/tube.

Specifications

  • Input Voltage Range: 85V AC to 265V AC
  • Output Power: Up to 65W
  • Switching Frequency: 65kHz to 115kHz
  • Standby Power Consumption: Less than 100mW
  • Operating Temperature Range: -40°C to +150°C

Detailed Pin Configuration

The ICE3BR1065JXKLA1 has the following pin configuration:

  1. VCC: Power supply input
  2. GND: Ground reference
  3. FB: Feedback pin for voltage regulation
  4. CS: Current sense pin for current regulation
  5. COMP: Compensation pin for stability control
  6. DRAIN: High-voltage power switch output
  7. SOURCE: Return path for the high-voltage power switch

Functional Features

  • High efficiency power conversion
  • Overvoltage protection
  • Overload protection
  • Overtemperature protection
  • Frequency jittering for reduced EMI emissions
  • Soft start for smooth power-up operation
  • Burst mode operation for low standby power consumption

Advantages and Disadvantages

Advantages

  • High energy efficiency
  • Compact size
  • Reliable operation
  • Comprehensive protection features
  • Wide input voltage range

Disadvantages

  • Limited output power (up to 65W)
  • Requires external components for a complete power supply design

Working Principles

The ICE3BR1065JXKLA1 operates based on the principles of pulse width modulation (PWM) control. It regulates the output voltage by adjusting the duty cycle of the switching waveform. This IC utilizes a high-voltage power switch to efficiently convert the input voltage into the desired output voltage.

Detailed Application Field Plans

The ICE3BR1065JXKLA1 is widely used in various applications, including: - AC/DC power supplies for consumer electronics - LED lighting drivers - Industrial power supplies - Telecom power systems - Automotive electronics

Detailed and Complete Alternative Models

  • ICE3BR0665JF: Similar functionality with lower output power capability
  • ICE3BR1765JZ: Higher output power capability with additional features
  • ICE3BR2565JF: Enhanced efficiency and higher switching frequency

Note: These alternative models may have different pin configurations and specifications. Please refer to the respective datasheets for detailed information.

Word count: 529 words

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan ICE3BR1065JXKLA1 dalam solusi teknis

Sure! Here are 10 common questions and answers related to the application of ICE3BR1065JXKLA1 in technical solutions:

Q1: What is ICE3BR1065JXKLA1? A1: ICE3BR1065JXKLA1 is a highly integrated off-line power switch IC designed for high-performance offline flyback converters.

Q2: What is the typical input voltage range for ICE3BR1065JXKLA1? A2: The typical input voltage range for ICE3BR1065JXKLA1 is from 85V AC to 265V AC.

Q3: What is the maximum output power that can be achieved with ICE3BR1065JXKLA1? A3: ICE3BR1065JXKLA1 can handle a maximum output power of up to 65W.

Q4: Can ICE3BR1065JXKLA1 be used in applications requiring high efficiency? A4: Yes, ICE3BR1065JXKLA1 is designed for high efficiency applications, making it suitable for use in various power supply designs.

Q5: Does ICE3BR1065JXKLA1 have built-in protection features? A5: Yes, ICE3BR1065JXKLA1 incorporates various protection features such as over-temperature protection, over-voltage protection, and over-current protection.

Q6: What is the operating frequency range of ICE3BR1065JXKLA1? A6: The operating frequency range of ICE3BR1065JXKLA1 is typically between 20kHz and 100kHz.

Q7: Can ICE3BR1065JXKLA1 be used in both continuous and discontinuous conduction mode (CCM and DCM)? A7: Yes, ICE3BR1065JXKLA1 can operate in both continuous and discontinuous conduction mode, providing flexibility in various power supply designs.

Q8: Is ICE3BR1065JXKLA1 suitable for universal input voltage applications? A8: Yes, ICE3BR1065JXKLA1 is designed to handle a wide range of input voltages, making it suitable for universal input voltage applications.

Q9: What are the typical applications of ICE3BR1065JXKLA1? A9: ICE3BR1065JXKLA1 is commonly used in applications such as LED lighting, consumer electronics, and industrial power supplies.

Q10: Does ICE3BR1065JXKLA1 require an external MOSFET? A10: Yes, ICE3BR1065JXKLA1 requires an external MOSFET to complete the power switch circuit.

Please note that these answers are general and may vary depending on specific design requirements.