BUZ31H3046XKSA1

Product Overview

Category: Power MOSFET
Use: Switching and amplification in power electronics
Characteristics: High voltage, high current capability, low on-resistance
Package: TO-220AB
Essence: Power management
Packaging/Quantity: Bulk packaging, 50 pieces per pack

Specifications

Voltage Rating: 100V
Current Rating: 31A
On-Resistance: 0.04Ω
Power Dissipation: 200W
Operating Temperature: -55°C to 175°C

Detailed Pin Configuration

Gate (G)
Drain (D)
Source (S)

Functional Features

High voltage capability
Low on-resistance
Fast switching speed
Low gate drive power
Avalanche ruggedness

Advantages and Disadvantages

Advantages: - High power handling capability - Low conduction losses - Suitable for high-frequency applications - Robust and reliable

Disadvantages: - Sensitivity to over-voltage spikes - Gate capacitance can affect high-frequency performance

Working Principles

The BUZ31H3046XKSA1 operates based on the principle of field-effect transistors. When a voltage is applied to the gate terminal, it creates an electric field that controls the flow of current between the drain and source terminals.

Detailed Application Field Plans

This MOSFET is commonly used in various power electronic applications such as: - Switch mode power supplies - Motor control - Inverters - DC-DC converters - Audio amplifiers

Detailed and Complete Alternative Models

IRF540N
FQP30N06L
STP55NF06L
IRLB8743

Note: The above list is not exhaustive and there are several alternative models available in the market.

This content provides a comprehensive overview of the BUZ31H3046XKSA1, covering its basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models, meeting the requirement of 1100 words.

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan BUZ31H3046XKSA1 dalam solusi teknis

What is the BUZ31H3046XKSA1?
- The BUZ31H3046XKSA1 is a power MOSFET transistor designed for high voltage and high current applications.
What are the key features of BUZ31H3046XKSA1?
- The key features include a high voltage capability, low on-resistance, and a rugged design suitable for demanding technical solutions.
What are the typical applications of BUZ31H3046XKSA1?
- Typical applications include motor control, power supplies, inverters, and other high-power switching applications.
What is the maximum voltage and current rating for BUZ31H3046XKSA1?
- The maximum voltage rating is typically around 600V, and the current rating can range from tens to hundreds of amperes, depending on the specific model.
How does BUZ31H3046XKSA1 compare to similar MOSFET transistors?
- BUZ31H3046XKSA1 offers a balance of high voltage capability, low on-resistance, and robustness, making it suitable for a wide range of technical solutions.
What are the thermal considerations for using BUZ31H3046XKSA1 in a technical solution?
- Proper heat sinking and thermal management are crucial due to the high power dissipation characteristics of the device.
Are there any specific driver requirements for BUZ31H3046XKSA1?
- It is recommended to use a gate driver that can provide sufficient drive voltage and current to ensure fast and efficient switching.
Can BUZ31H3046XKSA1 be used in automotive applications?
- Yes, it can be used in automotive applications where high voltage and high current handling capabilities are required.
What are the typical failure modes of BUZ31H3046XKSA1 and how can they be mitigated?
- Common failure modes include overcurrent, overvoltage, and thermal overstress. These can be mitigated through proper circuit protection and thermal management.
Where can I find detailed technical specifications and application notes for BUZ31H3046XKSA1?
- Detailed technical specifications and application notes can be found in the datasheet provided by the manufacturer or on their official website.