Infineon Technologies
Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
BTS737S3
Lihat Detail Lembar Data

BTS737S3

Product Overview

Category: Integrated Circuit (IC)

Use: Power Switch

Characteristics: - High current capability - Low on-resistance - Overtemperature protection - Short-circuit protection - Overvoltage protection

Package: TO-263-7 (D2PAK-7)

Essence: BTS737S3 is a power switch IC designed for various applications requiring high current switching.

Packaging/Quantity: The BTS737S3 is available in a TO-263-7 package and is typically sold in reels of 2500 units.

Specifications

  • Operating Voltage Range: 5V to 34V
  • Continuous Current Limit: 30A
  • RDS(ON): 8.5mΩ (max) at VGS = 10V, ID = 15A
  • Overtemperature Protection Threshold: 150°C
  • Short-Circuit Protection: Current-limited with adjustable threshold
  • Overvoltage Protection: Adjustable threshold

Detailed Pin Configuration

The BTS737S3 has seven pins arranged as follows:

  1. IN1: Input control signal 1
  2. IN2: Input control signal 2
  3. GND: Ground
  4. OUT: Output to load
  5. VS: Supply voltage
  6. EN: Enable pin
  7. PGND: Power ground

Functional Features

  • High Current Capability: The BTS737S3 can handle continuous currents up to 30A, making it suitable for demanding applications.
  • Low On-Resistance: With an RDS(ON) of only 8.5mΩ, the BTS737S3 minimizes power losses and improves efficiency.
  • Overtemperature Protection: The IC incorporates overtemperature protection, preventing damage due to excessive heat.
  • Short-Circuit Protection: The BTS737S3 features current-limited short-circuit protection, safeguarding the device and load from damage.
  • Overvoltage Protection: Adjustable overvoltage protection ensures that the voltage across the load remains within safe limits.

Advantages and Disadvantages

Advantages: - High current capability - Low on-resistance - Comprehensive protection features - Adjustable overvoltage and short-circuit protection thresholds

Disadvantages: - Limited operating voltage range (5V to 34V)

Working Principles

The BTS737S3 is based on MOSFET technology and operates as a power switch. It controls the flow of current between the input and output pins based on the control signals received at the IN1 and IN2 pins. When the enable pin (EN) is activated, the IC allows current to flow from the supply voltage (VS) to the load connected to the output pin (OUT). The IC incorporates various protection mechanisms to ensure safe operation under different conditions.

Detailed Application Field Plans

The BTS737S3 finds applications in various fields where high current switching is required. Some potential application areas include:

  1. Automotive: Power distribution systems, motor control, lighting control.
  2. Industrial: Motor drives, power supplies, robotics.
  3. Consumer Electronics: Audio amplifiers, LED lighting, battery charging circuits.

Detailed and Complete Alternative Models

  1. BTS740S2: Similar to BTS737S3 but with higher continuous current capability (40A).
  2. BTS734L2: Lower current version (20A) with similar features and package.
  3. BTS736S2: Higher voltage version (up to 60V) with comparable current capability (30A).

These alternative models provide flexibility in choosing the appropriate power switch IC based on specific requirements.

Word count: 470 words

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan BTS737S3 dalam solusi teknis

Sure! Here are 10 common questions and answers related to the application of BTS737S3 in technical solutions:

  1. Q: What is BTS737S3? A: BTS737S3 is a power switch used for controlling high-current loads in automotive applications.

  2. Q: What is the maximum current rating of BTS737S3? A: The maximum current rating of BTS737S3 is typically around 40A.

  3. Q: What voltage range does BTS737S3 support? A: BTS737S3 supports a wide voltage range, typically from 5V to 58V.

  4. Q: Can BTS737S3 handle short-circuit conditions? A: Yes, BTS737S3 has built-in protection features that allow it to handle short-circuit conditions safely.

  5. Q: Is BTS737S3 suitable for both AC and DC applications? A: No, BTS737S3 is specifically designed for DC applications and may not be suitable for AC applications.

  6. Q: What is the typical on-resistance of BTS737S3? A: The typical on-resistance of BTS737S3 is around 8 milliohms.

  7. Q: Does BTS737S3 require external gate drivers? A: No, BTS737S3 has an integrated gate driver, making it easier to control the switching operation.

  8. Q: Can BTS737S3 be used in automotive lighting applications? A: Yes, BTS737S3 is commonly used in automotive lighting applications such as headlights and taillights.

  9. Q: Does BTS737S3 have over-temperature protection? A: Yes, BTS737S3 includes over-temperature protection to prevent damage during high-temperature conditions.

  10. Q: Can BTS737S3 be used in high-power motor control applications? A: Yes, BTS737S3 is suitable for high-power motor control applications such as electric power steering and HVAC systems.

Please note that the answers provided here are general and may vary depending on the specific datasheet and application requirements of BTS737S3.