Infineon Technologies
Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
BC847BL3E6327XTMA1
Lihat Detail Lembar Data

BC847BL3E6327XTMA1

Product Overview

Category: Transistor
Use: Amplification and switching in electronic circuits
Characteristics: Small signal NPN transistor, low power dissipation, high current gain
Package: SOT-23
Essence: High performance and reliability for various electronic applications
Packaging/Quantity: Tape and reel, 3000 units per reel

Specifications

  • Collector-Base Voltage (VCBO): 45V
  • Collector-Emitter Voltage (VCEO): 45V
  • Emitter-Base Voltage (VEBO): 6V
  • Collector Current (IC): 100mA
  • Power Dissipation (Ptot): 250mW
  • Transition Frequency (fT): 270MHz
  • Operating Temperature Range: -55°C to 150°C

Detailed Pin Configuration

  1. Emitter (E)
  2. Base (B)
  3. Collector (C)

Functional Features

  • High current gain
  • Low power dissipation
  • Fast switching speed

Advantages and Disadvantages

Advantages: - High current gain allows for amplification of weak signals - Low power dissipation reduces heat generation - Fast switching speed enables rapid on/off transitions

Disadvantages: - Limited collector current compared to power transistors - Moderate voltage and current ratings

Working Principles

BC847BL3E6327XTMA1 operates as a small signal NPN transistor, where the base-emitter junction controls the flow of current between the collector and emitter terminals. When a small current is applied to the base, it modulates the larger current flowing from the collector to the emitter, allowing for amplification or switching of electronic signals.

Detailed Application Field Plans

The BC847BL3E6327XTMA1 is widely used in various electronic applications such as: - Audio amplifiers - Signal processing circuits - Switching circuits - Oscillators - Voltage regulators

Detailed and Complete Alternative Models

  • BC846BLT1G
  • BC848BLT1G
  • BC849BLT1G
  • 2N3904
  • 2N2222A

Note: The above list is not exhaustive and there are numerous alternative models available in the market.

This comprehensive entry provides an in-depth understanding of the BC847BL3E6327XTMA1 transistor, covering its basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan BC847BL3E6327XTMA1 dalam solusi teknis

  1. What is the BC847BL3E6327XTMA1 transistor used for?

    • The BC847BL3E6327XTMA1 is a general-purpose NPN bipolar junction transistor commonly used in amplification and switching applications.

  2. What are the key specifications of the BC847BL3E6327XTMA1?

    • The BC847BL3E6327XTMA1 has a maximum collector current of 100mA, a maximum collector-emitter voltage of 45V, and a maximum power dissipation of 250mW.

  3. How can the BC847BL3E6327XTMA1 be used in amplifier circuits?

    • The BC847BL3E6327XTMA1 can be used as a small-signal amplifier in audio and other low-power applications due to its high current gain and low noise characteristics.

  4. In what types of switching applications is the BC847BL3E6327XTMA1 commonly employed?

    • The BC847BL3E6327XTMA1 is often used in low-power switching circuits such as signal switching and digital logic gates.

  5. What are the typical operating conditions for the BC847BL3E6327XTMA1?

    • The BC847BL3E6327XTMA1 is typically operated at temperatures ranging from -55°C to 150°C and is suitable for use in various electronic devices and systems.

  6. Can the BC847BL3E6327XTMA1 be used in high-frequency applications?

    • While the BC847BL3E6327XTMA1 has moderate frequency capabilities, it is more commonly used in low to moderate frequency applications due to its transition frequency of around 100MHz.

  7. What are the recommended circuit configurations for the BC847BL3E6327XTMA1?

    • Common emitter and common collector configurations are often used with the BC847BL3E6327XTMA1 for amplification and switching purposes.

  8. Are there any specific considerations for PCB layout when using the BC847BL3E6327XTMA1?

    • It is important to minimize lead lengths and ensure proper grounding to reduce parasitic effects and maintain signal integrity when incorporating the BC847BL3E6327XTMA1 in PCB designs.

  9. What are the alternatives to the BC847BL3E6327XTMA1 if it is not available?

    • Alternatives to the BC847BL3E6327XTMA1 include similar NPN transistors such as the BC547B or 2N2222A, which may have comparable characteristics and pinouts.

  10. Where can I find detailed application notes for using the BC847BL3E6327XTMA1 in technical solutions?

    • Detailed application notes for the BC847BL3E6327XTMA1 can be found in the datasheet provided by the manufacturer, as well as in various electronics engineering resources and forums.