Infineon Technologies
Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
BAV99SE6433HTMA1
Lihat Detail Lembar Data

BAV99SE6433HTMA1 - Product Overview

Introduction

The BAV99SE6433HTMA1 is a versatile semiconductor component that belongs to the category of diodes. This product is widely used in various electronic applications due to its unique characteristics and performance.

Basic Information Overview

  • Category: Diode
  • Use: Signal switching, voltage rectification
  • Characteristics: High-speed switching, low leakage current, small package size
  • Package: SOT-23
  • Essence: Silicon diode
  • Packaging/Quantity: Tape and reel, 3000 units per reel

Specifications

  • Maximum Continuous Forward Current: 200 mA
  • Maximum Reverse Voltage: 70 V
  • Forward Voltage Drop: 0.715 V at 10 mA
  • Reverse Leakage Current: 25 nA at 50 V

Detailed Pin Configuration

The BAV99SE6433HTMA1 has a standard SOT-23 package with three pins: 1. Pin 1: Anode of Diode 1 2. Pin 2: Common Cathode 3. Pin 3: Anode of Diode 2

Functional Features

  • High-speed switching capability
  • Low forward voltage drop
  • Low reverse leakage current
  • Small package size for space-constrained applications

Advantages and Disadvantages

Advantages

  • Fast response time
  • Low power dissipation
  • Compact form factor

Disadvantages

  • Limited maximum current handling capacity
  • Sensitivity to overvoltage conditions

Working Principles

The BAV99SE6433HTMA1 operates based on the principles of semiconductor physics. When a forward bias voltage is applied, it allows current to flow in one direction, while blocking current flow in the reverse direction. This property makes it suitable for signal switching and voltage rectification applications.

Detailed Application Field Plans

The BAV99SE6433HTMA1 finds extensive use in the following applications: - Signal switching in communication systems - Voltage rectification in power supply circuits - Overvoltage protection in electronic devices

Detailed and Complete Alternative Models

Some alternative models to the BAV99SE6433HTMA1 include: - 1N4148: A general-purpose diode with similar characteristics - BAT54S: Dual series Schottky diode with comparable performance - BAV70: Dual switching diode with higher current handling capacity

In conclusion, the BAV99SE6433HTMA1 is a reliable diode with high-speed switching capabilities and low leakage current, making it suitable for a wide range of electronic applications.

[Word count: 345 words]

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan BAV99SE6433HTMA1 dalam solusi teknis

  1. What is the BAV99SE6433HTMA1?

    • The BAV99SE6433HTMA1 is a dual common cathode switching diode array with ESD protection, commonly used in electronic circuits for signal switching and protection.

  2. What are the key features of BAV99SE6433HTMA1?

    • The key features include dual diodes with common cathode configuration, high ESD protection level, low leakage current, and small SOT-23 package.

  3. What are the typical applications of BAV99SE6433HTMA1?

    • Typical applications include signal switching, high-speed logic circuits, voltage clamping, and ESD protection in portable electronics, communication devices, and industrial equipment.

  4. What is the maximum forward voltage of BAV99SE6433HTMA1?

    • The maximum forward voltage is typically around 1V at a forward current of 100mA.

  5. What is the reverse breakdown voltage of BAV99SE6433HTMA1?

    • The reverse breakdown voltage is typically around 75V.

  6. How does BAV99SE6433HTMA1 provide ESD protection?

    • The integrated ESD protection diodes can divert transient voltages away from sensitive components, protecting the circuit from electrostatic discharge events.

  7. What is the operating temperature range of BAV99SE6433HTMA1?

    • The operating temperature range is typically -55°C to 150°C, making it suitable for a wide range of environments.

  8. Can BAV99SE6433HTMA1 be used in high-frequency applications?

    • Yes, it is suitable for high-frequency applications due to its fast switching speed and low capacitance.

  9. Are there any recommended layout considerations when using BAV99SE6433HTMA1?

    • It is recommended to minimize trace lengths and keep the diodes close to the protected components to optimize ESD protection.

  10. Where can I find detailed technical specifications and application notes for BAV99SE6433HTMA1?

    • Detailed technical specifications and application notes can be found in the datasheet provided by the manufacturer or distributor of the component.