Infineon Technologies
Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
ADM6995LAAT1

ADM6995LAAT1

Basic Information Overview

  • Category: Integrated Circuit (IC)
  • Use: Networking and Communication
  • Characteristics: High-performance Ethernet switch controller
  • Package: Small Outline Integrated Circuit (SOIC)
  • Essence: Provides advanced switching capabilities for network devices
  • Packaging/Quantity: Available in tape and reel packaging, quantity varies based on customer requirements

Specifications

  • Manufacturer: Analog Devices Inc.
  • Part Number: ADM6995LAAT1
  • Technology: CMOS
  • Supply Voltage: 3.3V
  • Operating Temperature Range: -40°C to +85°C
  • Data Rate: Up to 100 Mbps
  • Number of Ports: 5
  • Interface: MII (Media Independent Interface)
  • Power Consumption: Low power consumption

Detailed Pin Configuration

The ADM6995LAAT1 has a total of 48 pins. The pin configuration is as follows:

  1. VDD
  2. VDD
  3. VDD
  4. VDD
  5. VDD
  6. VDD
  7. VDD
  8. VDD
  9. VDD
  10. VDD
  11. VDD
  12. VDD
  13. VDD
  14. VDD
  15. VDD
  16. VDD
  17. VDD
  18. VDD
  19. VDD
  20. VDD
  21. VDD
  22. VDD
  23. VDD
  24. VDD
  25. VDD
  26. VDD
  27. VDD
  28. VDD
  29. VDD
  30. VDD
  31. VDD
  32. VDD
  33. VDD
  34. VDD
  35. VDD
  36. VDD
  37. VDD
  38. VDD
  39. VDD
  40. VDD
  41. VDD
  42. VDD
  43. VDD
  44. VDD
  45. VDD
  46. VDD
  47. VDD
  48. VDD

Functional Features

  • Advanced switching capabilities for network devices
  • Supports VLAN (Virtual Local Area Network) tagging and trunking
  • Provides Quality of Service (QoS) features for traffic prioritization
  • Supports Spanning Tree Protocol (STP) for loop prevention
  • Integrated MAC (Media Access Control) address table for efficient packet forwarding
  • Auto-negotiation and auto-MDI/MDIX support for easy installation

Advantages and Disadvantages

Advantages: - High-performance Ethernet switch controller - Supports advanced networking features - Low power consumption - Easy installation with auto-negotiation and auto-MDI/MDIX support

Disadvantages: - Limited number of ports (5 in this case) - Limited data rate (up to 100 Mbps)

Working Principles

The ADM6995LAAT1 is a high-performance Ethernet switch controller that operates based on the principles of packet switching. It receives incoming packets from different network devices, examines their destination addresses, and forwards them to the appropriate port. The integrated MAC address table allows for efficient packet forwarding by storing the MAC addresses of connected devices.

Detailed Application Field Plans

The ADM6995LAAT1 can be used in various networking and communication applications, including: - Small office/home office (SOHO) networks - Ethernet switches and routers - Industrial automation systems - Internet of Things (IoT) devices - Embedded systems requiring Ethernet connectivity

Detailed and Complete Alternative Models

  • ADM6996LAAT1: Similar to ADM6995LAAT1 but with additional features such as Power over Ethernet (PoE) support.
  • ADM6997LAAT1: Higher-performance Ethernet switch controller with Gigabit Ethernet support.
  • ADM6998LAAT1: Advanced Ethernet switch controller with Layer 2 managed switch features.

Note: This is not an exhaustive list of alternative models, and there may be other options available from different manufacturers.

Word count: 400 words

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan ADM6995LAAT1 dalam solusi teknis

Sure! Here are 10 common questions and answers related to the application of ADM6995LAAT1 in technical solutions:

Q1: What is ADM6995LAAT1? A1: ADM6995LAAT1 is a specific model of Ethernet switch manufactured by Analog Devices. It is commonly used in networking and technical solutions.

Q2: What are the key features of ADM6995LAAT1? A2: Some key features of ADM6995LAAT1 include high-speed switching, multiple ports, support for various network protocols, VLAN support, and advanced management capabilities.

Q3: How many ports does ADM6995LAAT1 have? A3: ADM6995LAAT1 typically has multiple ports, ranging from 8 to 24 ports, depending on the specific model.

Q4: What network protocols does ADM6995LAAT1 support? A4: ADM6995LAAT1 supports various network protocols such as Ethernet, Fast Ethernet, Gigabit Ethernet, and IEEE 802.3 standards.

Q5: Can ADM6995LAAT1 be used in both small and large-scale networks? A5: Yes, ADM6995LAAT1 can be used in both small and large-scale networks. Its scalability allows it to be deployed in different network sizes.

Q6: Does ADM6995LAAT1 support VLANs? A6: Yes, ADM6995LAAT1 supports Virtual Local Area Networks (VLANs), which enable network segmentation and improved network management.

Q7: Is ADM6995LAAT1 suitable for PoE (Power over Ethernet) applications? A7: No, ADM6995LAAT1 does not support Power over Ethernet (PoE). It is primarily designed for data switching rather than providing power to connected devices.

Q8: Can ADM6995LAAT1 be managed remotely? A8: Yes, ADM6995LAAT1 supports remote management through various protocols such as SNMP (Simple Network Management Protocol) and web-based management interfaces.

Q9: What is the power consumption of ADM6995LAAT1? A9: The power consumption of ADM6995LAAT1 varies depending on the number of ports and network load. It is typically within a specified range provided by the manufacturer.

Q10: Are there any known compatibility issues with ADM6995LAAT1? A10: Compatibility issues are rare, but it's always recommended to check the product documentation and consult with the manufacturer or technical support for specific compatibility concerns.

Please note that the answers provided here are general and may vary based on the specific implementation and configuration of ADM6995LAAT1 in different technical solutions.