IDT, Integrated Device Technology Inc
Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
QS3VH2861QG
Lihat Detail Lembar Data

QS3VH2861QG

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Signal Switch
  • Characteristics: High-speed, Low-power, Bidirectional
  • Package: Quad Flat No-Lead (QFN)
  • Essence: A versatile signal switch designed for various applications
  • Packaging/Quantity: Available in reels of 2500 units

Specifications

  • Supply Voltage: 2.3V to 3.6V
  • Switching Frequency: Up to 500MHz
  • On-Resistance: 4Ω (typical)
  • Off-Isolation: -40dB (typical)
  • Propagation Delay: 0.5ns (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The QS3VH2861QG features a 16-pin Quad Flat No-Lead (QFN) package with the following pin configuration:

Pin 1: VCC Pin 2: GND Pin 3: S1 Pin 4: D1 Pin 5: D2 Pin 6: S2 Pin 7: D3 Pin 8: D4 Pin 9: S3 Pin 10: D5 Pin 11: D6 Pin 12: S4 Pin 13: D7 Pin 14: D8 Pin 15: OE# Pin 16: NC

Functional Features

  • Bidirectional signal switching capability
  • Low power consumption
  • High-speed operation
  • Wide operating voltage range
  • Excellent off-isolation performance
  • Minimal propagation delay

Advantages and Disadvantages

Advantages: - Versatile signal switch suitable for various applications - High-speed switching capability enables efficient data transmission - Low power consumption helps conserve energy - Wide operating voltage range allows compatibility with different systems - Excellent off-isolation performance ensures minimal interference between channels - Compact QFN package offers space-saving benefits

Disadvantages: - Limited number of channels (8 channels) - Not suitable for high-power applications

Working Principles

The QS3VH2861QG is a bidirectional signal switch that operates by controlling the connection between input and output channels. It utilizes advanced semiconductor technology to achieve high-speed switching while consuming minimal power. The switch can be controlled using the OE# (Output Enable) pin, which enables or disables the signal transmission.

Detailed Application Field Plans

The QS3VH2861QG finds applications in various fields, including:

  1. Communication Systems: Used for signal routing and switching in telecommunication networks.
  2. Test and Measurement Equipment: Enables flexible signal routing in testing setups.
  3. Data Acquisition Systems: Facilitates multiplexing of analog signals in data acquisition systems.
  4. Industrial Automation: Allows for efficient control of signals in industrial automation processes.
  5. Consumer Electronics: Used in audio/video devices for signal selection and routing.

Detailed and Complete Alternative Models

  1. QS3VH245QG: Octal Bus Switch with similar characteristics but higher channel count.
  2. QS3VH384QG: 10-bit Bus Switch with additional features for digital applications.
  3. QS3VH125QG: Quad Bus Buffer with tri-state outputs for bus isolation.

These alternative models offer similar functionality and can be considered based on specific application requirements.

Word Count: 314 words

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan QS3VH2861QG dalam solusi teknis

Sure! Here are 10 common questions and answers related to the application of QS3VH2861QG in technical solutions:

1. What is QS3VH2861QG? - QS3VH2861QG is a high-speed, low-power, quad 2:1 multiplexer/demultiplexer switch designed for use in various technical applications.

2. What is the operating voltage range of QS3VH2861QG? - The operating voltage range of QS3VH2861QG is typically between 2.3V and 3.6V.

3. What is the maximum data rate supported by QS3VH2861QG? - QS3VH2861QG supports a maximum data rate of up to 400 Mbps.

4. Can QS3VH2861QG be used for bidirectional data transmission? - Yes, QS3VH2861QG can be used for bidirectional data transmission as it acts as both a multiplexer and a demultiplexer.

5. What is the typical on-resistance of QS3VH2861QG? - The typical on-resistance of QS3VH2861QG is around 5 ohms.

6. Is QS3VH2861QG compatible with different logic families? - Yes, QS3VH2861QG is compatible with various logic families such as TTL, CMOS, and LVCMOS.

7. Can QS3VH2861QG handle hot-swapping applications? - Yes, QS3VH2861QG is designed to handle hot-swapping applications, making it suitable for systems that require live insertion or removal of components.

8. Does QS3VH2861QG have built-in ESD protection? - Yes, QS3VH2861QG features built-in ESD protection, ensuring robustness against electrostatic discharge events.

9. What is the package type of QS3VH2861QG? - QS3VH2861QG is available in a small footprint 16-pin TSSOP (Thin Shrink Small Outline Package).

10. Can QS3VH2861QG be used in high-speed communication systems? - Yes, QS3VH2861QG is suitable for use in high-speed communication systems such as data switches, routers, and network equipment due to its high-speed capabilities and low power consumption.

Please note that these answers are general and may vary depending on the specific application and requirements.