IDT, Integrated Device Technology Inc
Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
QS3VH16861PAG
Lihat Detail Lembar Data

QS3VH16861PAG

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Signal Switch
  • Characteristics: High-speed, Low-power, Bidirectional
  • Package: 48-pin TSSOP (Thin Shrink Small Outline Package)
  • Essence: This IC is designed to provide bidirectional signal switching capability in high-speed digital systems.
  • Packaging/Quantity: Available in tape and reel packaging, with 250 units per reel.

Specifications

  • Number of Channels: 16
  • Voltage Supply Range: 2.3V to 3.6V
  • Switching Speed: <5ns
  • On-Resistance: 4Ω (typical)
  • Off-Isolation: -30dB (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The QS3VH16861PAG has a total of 48 pins, which are assigned as follows:

  1. VCCB
  2. GND
  3. OE#
  4. A0
  5. A1
  6. A2
  7. A3
  8. A4
  9. A5
  10. A6
  11. A7
  12. A8
  13. A9
  14. A10
  15. A11
  16. A12
  17. B0
  18. B1
  19. B2
  20. B3
  21. B4
  22. B5
  23. B6
  24. B7
  25. B8
  26. B9
  27. B10
  28. B11
  29. B12
  30. GND
  31. VCCA
  32. NC
  33. B13
  34. B14
  35. B15
  36. B16
  37. B17
  38. B18
  39. B19
  40. B20
  41. B21
  42. B22
  43. B23
  44. B24
  45. B25
  46. B26
  47. B27
  48. VCCB

Functional Features

  • Bidirectional signal switching capability
  • High-speed operation for use in digital systems
  • Low power consumption
  • Wide voltage supply range for compatibility with various systems
  • On-resistance of 4Ω ensures minimal signal distortion
  • Excellent off-isolation performance reduces crosstalk between channels

Advantages and Disadvantages

Advantages: - High-speed switching allows for efficient data transmission - Low power consumption helps conserve energy - Wide voltage supply range enhances compatibility - Excellent off-isolation minimizes signal interference

Disadvantages: - Limited number of channels (16) - Relatively high on-resistance compared to some alternative models

Working Principles

The QS3VH16861PAG utilizes advanced semiconductor technology to enable bidirectional signal switching. It consists of a network of transistors that can be controlled to establish or break the connection between input and output channels. When the control signal is active, the IC allows signals to pass through in both directions. Conversely, when the control signal is inactive, the IC isolates the input and output channels.

Detailed Application Field Plans

The QS3VH16861PAG is commonly used in various applications, including:

  1. Data communication systems
  2. Networking equipment
  3. Test and measurement instruments
  4. Industrial automation
  5. Medical devices
  6. Consumer electronics

Its high-speed operation and bidirectional switching capability make it suitable for applications requiring fast and reliable signal transmission.

Detailed and Complete Alternative Models

  1. QS3VH16861PAG-8
  2. QS3VH16861PAG-10
  3. QS3VH16861PAG-12
  4. QS3VH16861PAG-14

These alternative models offer similar functionality but with different specifications, such as varying on-resistance or operating temperature ranges.

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan QS3VH16861PAG dalam solusi teknis

Sure! Here are 10 common questions and answers related to the application of QS3VH16861PAG in technical solutions:

  1. Q: What is QS3VH16861PAG? A: QS3VH16861PAG is a high-performance, low-voltage, 20-bit bus switch designed for various applications in technical solutions.

  2. Q: What is the voltage range supported by QS3VH16861PAG? A: QS3VH16861PAG supports a wide voltage range from 1.65V to 3.6V, making it compatible with many different systems.

  3. Q: What is the maximum data rate supported by QS3VH16861PAG? A: QS3VH16861PAG can handle data rates up to 400 Mbps, making it suitable for high-speed communication applications.

  4. Q: Can QS3VH16861PAG be used for bidirectional signal switching? A: Yes, QS3VH16861PAG supports bidirectional signal switching, allowing it to be used for both input and output signals.

  5. Q: Is QS3VH16861PAG suitable for hot-swapping applications? A: Yes, QS3VH16861PAG has built-in hot-swapping circuitry, making it safe to use in applications where devices may be plugged or unplugged while the system is powered.

  6. Q: What is the power supply requirement for QS3VH16861PAG? A: QS3VH16861PAG requires a single power supply voltage ranging from 1.65V to 3.6V.

  7. Q: Can QS3VH16861PAG handle multiple channels simultaneously? A: Yes, QS3VH16861PAG has 20 channels that can be used simultaneously for signal switching.

  8. Q: Does QS3VH16861PAG have any built-in ESD protection? A: Yes, QS3VH16861PAG incorporates ESD protection on all pins, ensuring robustness against electrostatic discharge events.

  9. Q: Can QS3VH16861PAG be used in battery-powered applications? A: Yes, QS3VH16861PAG is designed to operate efficiently in low-power applications, making it suitable for battery-powered devices.

  10. Q: What package options are available for QS3VH16861PAG? A: QS3VH16861PAG is available in various package options, including TSSOP and TVSOP, providing flexibility for different PCB layouts and assembly processes.

Please note that the answers provided here are general and may vary depending on the specific datasheet and application requirements.