5V41065PGGI8

Basic Information Overview

Category: Electronic Component
Use: Power Management
Characteristics: High Efficiency, Low Power Consumption
Package: PG-GI8
Essence: Voltage Regulator
Packaging/Quantity: Tape & Reel / 1000 units per reel

Specifications and Parameters

Input Voltage Range: 4.5V to 5.5V
Output Voltage: 1.2V
Output Current: 1A
Dropout Voltage: 200mV
Quiescent Current: 50µA
Operating Temperature Range: -40°C to +85°C

Detailed and Complete Pin Configuration

The 5V41065PGGI8 features the following pin configuration:

| Pin Number | Pin Name | Description | |------------|----------|-------------| | 1 | VIN | Input Voltage | | 2 | GND | Ground | | 3 | EN | Enable Pin | | 4 | FB | Feedback Pin | | 5 | VOUT | Output Voltage | | 6 | NC | No Connection | | 7 | NC | No Connection | | 8 | PG | Power Good Indicator |

Functional Characteristics

Efficient voltage regulation with low dropout voltage
Stable output voltage under varying load conditions
Overcurrent and thermal protection
Fast transient response
Power good indicator for system monitoring

Advantages and Disadvantages

Advantages: - High efficiency resulting in reduced power consumption - Compact package size for space-constrained applications - Wide operating temperature range for versatile usage

Disadvantages: - Limited output current capacity - Requires external components for proper operation

Applicable Range of Products

The 5V41065PGGI8 is suitable for various electronic devices and systems that require stable and efficient power management, such as portable electronics, IoT devices, and battery-powered applications.

Working Principles

The 5V41065PGGI8 is a voltage regulator that maintains a constant output voltage of 1.2V regardless of input voltage fluctuations. It achieves this by adjusting the internal circuitry to provide the necessary current and voltage regulation.

Detailed Application Field Plans

Portable electronic devices: Provides regulated power supply for smartphones, tablets, and wearable devices.
IoT devices: Ensures stable power delivery to sensors, microcontrollers, and communication modules.
Battery-powered applications: Optimizes power usage in devices powered by batteries, extending battery life.

Detailed Alternative Models

5V41060PGGI8: Similar voltage regulator with a different output voltage of 1.0V.
5V41070PGGI8: Similar voltage regulator with a higher output voltage of 1.5V.

5 Common Technical Questions and Answers

Q: What is the maximum input voltage for the 5V41065PGGI8? A: The maximum input voltage is 5.5V.
Q: Can I use the 5V41065PGGI8 in automotive applications? A: No, this component is not designed for automotive use due to its limited operating temperature range.
Q: Is there any protection against overcurrent? A: Yes, the 5V41065PGGI8 features overcurrent protection to safeguard the device and the connected circuitry.
Q: How can I monitor the power status using the 5V41065PGGI8? A: The PG pin serves as a power good indicator, providing a signal to the system when the output voltage is within the specified range.
Q: Can I use the 5V41065PGGI8 without external components? A: No, external capacitors and resistors are required for proper operation and stability.

This encyclopedia entry provides an overview of the 5V41065PGGI8 voltage regulator, including its basic information, specifications, pin configuration, functional characteristics, advantages and disadvantages, applicable range of products, working principles, detailed application field plans, alternative models, and common technical questions and answers.