Honeywell Sensing and Productivity Solutions
Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
SSCDANN150PG2A3
Lihat Detail Lembar Data

SSCDANN150PG2A3

Product Overview

Category: Sensor
Use: Pressure sensing in industrial applications
Characteristics: High accuracy, durable construction, compact size
Package: Ceramic package
Essence: Measures pressure and converts it into an electrical signal
Packaging/Quantity: Individual units

Specifications

  • Pressure Range: 0-150 psi
  • Output: Analog voltage signal
  • Operating Temperature: -40°C to 125°C
  • Supply Voltage: 5V
  • Accuracy: ±1%

Detailed Pin Configuration

  1. VCC
  2. GND
  3. Output

Functional Features

  • High accuracy in pressure measurement
  • Robust construction for industrial environments
  • Compact size for easy integration

Advantages

  • Reliable and accurate pressure sensing
  • Durable construction for long-term use
  • Compact design for easy installation

Disadvantages

  • Limited pressure range compared to some other models
  • Operating temperature range may not be suitable for extreme environments

Working Principles

The SSCDANN150PG2A3 operates on the principle of piezoresistive sensing. When pressure is applied, the internal diaphragm deflects, causing a change in resistance which is then converted into an analog voltage signal.

Detailed Application Field Plans

  • Industrial automation
  • Hydraulic systems
  • Pneumatic systems
  • Pressure monitoring in manufacturing processes

Detailed and Complete Alternative Models

  1. SSCDANN200PG2A3 - Higher pressure range
  2. SSCDANN100PG2A3 - Lower pressure range
  3. SSCDANN150MG2A3 - Different package type

This sensor is a versatile and reliable solution for pressure sensing in various industrial applications, offering high accuracy and durability. Its compact size and robust construction make it suitable for integration into different systems, providing precise pressure measurements.

Word count: 271

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan SSCDANN150PG2A3 dalam solusi teknis

  1. What is the SSCDANN150PG2A3 sensor used for?

    • The SSCDANN150PG2A3 sensor is a digital output CMOS optical sensor designed for use in applications such as touchless switches, proximity sensors, and object detection.

  2. What is the operating voltage range of the SSCDANN150PG2A3 sensor?

    • The operating voltage range of the SSCDANN150PG2A3 sensor is typically 2.7V to 3.6V.

  3. How does the SSCDANN150PG2A3 sensor communicate with microcontrollers or other devices?

    • The SSCDANN150PG2A3 sensor communicates using a standard I2C interface, making it compatible with a wide range of microcontrollers and devices.

  4. What is the sensing distance of the SSCDANN150PG2A3 sensor?

    • The sensing distance of the SSCDANN150PG2A3 sensor can vary based on environmental conditions, but it is typically in the range of a few centimeters to a few meters.

  5. Can the SSCDANN150PG2A3 sensor be used in outdoor applications?

    • The SSCDANN150PG2A3 sensor can be used in outdoor applications, but it may require additional protection from environmental factors such as moisture and direct sunlight.

  6. What are the typical applications of the SSCDANN150PG2A3 sensor in industrial settings?

    • In industrial settings, the SSCDANN150PG2A3 sensor can be used for presence detection, automated equipment control, and object tracking.

  7. Does the SSCDANN150PG2A3 sensor have built-in ambient light rejection capabilities?

    • Yes, the SSCDANN150PG2A3 sensor is designed to have built-in ambient light rejection capabilities, allowing it to operate effectively in various lighting conditions.

  8. What are the key features that make the SSCDANN150PG2A3 sensor suitable for consumer electronics applications?

    • The SSCDANN150PG2A3 sensor's low power consumption, small form factor, and reliable proximity sensing make it ideal for consumer electronics applications such as smartphones, tablets, and wearable devices.

  9. Can the SSCDANN150PG2A3 sensor be integrated into battery-powered devices?

    • Yes, the low power consumption of the SSCDANN150PG2A3 sensor makes it well-suited for integration into battery-powered devices, extending the operational lifespan of the device.

  10. Are there any specific design considerations when integrating the SSCDANN150PG2A3 sensor into a technical solution?

    • When integrating the SSCDANN150PG2A3 sensor, it's important to consider factors such as power supply stability, signal integrity, and environmental conditions to ensure optimal performance and reliability.