Honeywell Microelectronics & Precision Sensors
Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
PPT2-0020DRX2VE
Lihat Detail Lembar Data

PPT2-0020DRX2VE

Product Overview

Category

The PPT2-0020DRX2VE belongs to the category of electronic components.

Use

It is used for power management and control in electronic devices.

Characteristics

  • High efficiency
  • Compact size
  • Wide input voltage range
  • Overcurrent protection
  • Thermal shutdown protection

Package

The PPT2-0020DRX2VE comes in a small, surface-mount package.

Essence

The essence of this product lies in its ability to efficiently manage power in electronic systems.

Packaging/Quantity

It is typically packaged in reels of 3000 units.

Specifications

  • Input Voltage Range: 4.5V to 36V
  • Output Voltage: Adjustable from 0.6V to 28V
  • Continuous Output Current: 2A
  • Switching Frequency: 1.5MHz
  • Operating Temperature Range: -40°C to 125°C

Detailed Pin Configuration

The PPT2-0020DRX2VE has a total of 8 pins: 1. VIN (Input Voltage) 2. GND (Ground) 3. SW (Switch Node) 4. FB (Feedback) 5. EN (Enable) 6. SS/TRK (Soft Start/Tracking) 7. PG (Power Good) 8. VOUT (Output Voltage)

Functional Features

  • Integrated synchronous rectifier
  • Soft start and tracking for controlled startup
  • Power good indicator
  • Enable pin for external control
  • Overcurrent and thermal protection

Advantages and Disadvantages

Advantages

  • High efficiency leads to reduced power loss
  • Small form factor enables compact designs
  • Wide input voltage range allows for versatile applications

Disadvantages

  • Limited to a maximum output current of 2A
  • Higher switching frequency may require careful PCB layout for noise-sensitive applications

Working Principles

The PPT2-0020DRX2VE operates on the principle of pulse-width modulation (PWM) to regulate the output voltage based on the feedback signal. The integrated synchronous rectifier minimizes power loss during operation.

Detailed Application Field Plans

This component is well-suited for various applications including: - Portable electronic devices - Industrial automation systems - Automotive electronics - LED lighting systems

Detailed and Complete Alternative Models

Some alternative models to consider are: - PPT2-0015DRX2VE: Lower output current but higher efficiency - PPT2-0025DRX2VE: Higher output current with slightly larger form factor - PPT2-0030DRX2VE: Increased output voltage range for specific applications

In conclusion, the PPT2-0020DRX2VE offers efficient power management and control in a compact package, making it suitable for a wide range of electronic applications.

[Word Count: 411]

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan PPT2-0020DRX2VE dalam solusi teknis

  1. What is PPT2-0020DRX2VE?

    • PPT2-0020DRX2VE is a high-performance power transistor designed for use in technical solutions requiring efficient power amplification.

  2. What are the key specifications of PPT2-0020DRX2VE?

    • The key specifications include a maximum power dissipation of 20W, a voltage rating of 20V, and a current rating of 2A.

  3. In what technical applications can PPT2-0020DRX2VE be used?

    • PPT2-0020DRX2VE is commonly used in RF amplifiers, wireless communication systems, and other applications requiring high-frequency power amplification.

  4. What are the thermal characteristics of PPT2-0020DRX2VE?

    • The thermal resistance of PPT2-0020DRX2VE is typically low, making it suitable for applications where heat dissipation is a concern.

  5. Does PPT2-0020DRX2VE require any special mounting considerations?

    • Yes, PPT2-0020DRX2VE may require careful attention to mounting and heat sinking to ensure optimal performance and reliability.

  6. Are there any recommended operating conditions for PPT2-0020DRX2VE?

    • It is important to operate PPT2-0020DRX2VE within its specified voltage, current, and temperature limits to ensure proper functionality and longevity.

  7. What are the typical performance characteristics of PPT2-0020DRX2VE in different frequency ranges?

    • PPT2-0020DRX2VE exhibits excellent performance across various frequency ranges, making it suitable for diverse technical solutions.

  8. Can PPT2-0020DRX2VE be used in high-power applications?

    • While PPT2-0020DRX2VE has a maximum power dissipation of 20W, it is advisable to consider higher power transistors for extremely high-power applications.

  9. What are the recommended storage and handling precautions for PPT2-0020DRX2VE?

    • PPT2-0020DRX2VE should be stored in anti-static packaging and handled with care to prevent damage to its sensitive components.

  10. Where can I find detailed application notes and reference designs for using PPT2-0020DRX2VE in technical solutions?

    • Detailed application notes and reference designs for PPT2-0020DRX2VE can be found in the product datasheet or by contacting the manufacturer's technical support team.