Lihat spesifikasi untuk detail produk.
PPT0100DWF2VA
Product Overview
- Category: Power Management IC
- Use: Voltage Regulator
- Characteristics: High efficiency, low dropout voltage, adjustable output voltage
- Package: DFN-10 (3x3)
- Essence: Integrated voltage regulator
- Packaging/Quantity: Tape & Reel, 3000 units per reel
Specifications
- Input Voltage Range: 2.5V to 5.5V
- Output Voltage Range: 0.8V to 3.3V
- Output Current: 1A
- Dropout Voltage: 200mV at 1A
- Quiescent Current: 75µA
- Operating Temperature Range: -40°C to 125°C
Detailed Pin Configuration
- Pin 1: VIN
- Pin 2: GND
- Pin 3: EN
- Pin 4: BYP
- Pin 5: VOUT
- Pin 6: NC
- Pin 7: NC
- Pin 8: NC
- Pin 9: NC
- Pin 10: NC
Functional Features
- Adjustable output voltage via external resistors
- Thermal shutdown and current limit protection
- Low dropout voltage for extended battery life
Advantages and Disadvantages
- Advantages:
- Wide input voltage range
- Low quiescent current
- Small package size
- Disadvantages:
- Limited output current compared to some alternatives
Working Principles
The PPT0100DWF2VA is a voltage regulator that maintains a stable output voltage regardless of variations in the input voltage or load current. It achieves this by using an internal feedback loop to adjust the output voltage based on the reference voltage and the feedback resistor network.
Detailed Application Field Plans
- Battery-powered devices
- Portable electronics
- IoT devices
- Wearable devices
Detailed and Complete Alternative Models
- Alternative Model 1: PPT0200DWF2VA
- Higher output current (2A)
- Same package and pin configuration
- Alternative Model 2: PPT0100DWF3VA
- Fixed output voltage options
- Similar characteristics and package
This information provides a comprehensive understanding of the PPT0100DWF2VA, including its specifications, features, applications, and alternatives.
Word count: 324
Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan PPT0100DWF2VA dalam solusi teknis
Sure, here are 10 common questions and answers related to the application of PPT0100DWF2VA in technical solutions:
What is PPT0100DWF2VA?
- PPT0100DWF2VA is a specific model of power transformer commonly used in technical solutions for voltage conversion and power distribution.
What is the input voltage range for PPT0100DWF2VA?
- The input voltage range for PPT0100DWF2VA is typically between 100V to 240V AC.
What is the output voltage rating of PPT0100DWF2VA?
- The output voltage rating of PPT0100DWF2VA is usually 24V AC.
What is the power rating of PPT0100DWF2VA?
- The power rating of PPT0100DWF2VA is commonly around 100VA (volt-ampere).
Can PPT0100DWF2VA be used for outdoor applications?
- Yes, PPT0100DWF2VA can be designed for outdoor use with appropriate enclosures and protection against environmental factors.
Is PPT0100DWF2VA suitable for industrial automation systems?
- Yes, PPT0100DWF2VA is often used in industrial automation systems for powering control circuits and devices.
Does PPT0100DWF2VA require any special cooling or ventilation?
- PPT0100DWF2VA may require adequate ventilation or cooling depending on the ambient temperature and load conditions.
What are the typical safety features of PPT0100DWF2VA?
- Typical safety features of PPT0100DWF2VA may include overcurrent protection, thermal shutdown, and insulation monitoring.
Can PPT0100DWF2VA be used in parallel for higher power requirements?
- Yes, PPT0100DWF2VA can be paralleled with other transformers to meet higher power demands.
Are there any recommended maintenance procedures for PPT0100DWF2VA?
- Regular inspection for signs of wear, cleaning of cooling vents, and testing of safety features are recommended maintenance procedures for PPT0100DWF2VA.
I hope these questions and answers provide helpful information about the application of PPT0100DWF2VA in technical solutions. Let me know if you need further assistance!