Exar Corporation
Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
ST16C554CQ64TR-F
Lihat Detail Lembar Data

ST16C554CQ64TR-F

Overview

Category: Integrated Circuit (IC)

Use: Serial Communication Controller

Characteristics: - High-performance UART with 16-byte FIFOs - Supports asynchronous and synchronous serial communication - Low power consumption - Wide operating voltage range - Small package size

Package: QFP-64 (Quad Flat Package)

Essence: The ST16C554CQ64TR-F is a high-performance UART IC used for serial communication in various electronic devices.

Packaging/Quantity: The ST16C554CQ64TR-F is typically sold in reels or trays, with a quantity of 2500 units per reel.

Specifications

  • Supply Voltage Range: 3.0V to 5.5V
  • Operating Temperature Range: -40°C to +85°C
  • Data Rate: Up to 1 Mbps
  • Number of Channels: 4
  • FIFO Size: 16 bytes per channel
  • Interface: RS-232, RS-422, RS-485

Pin Configuration

The ST16C554CQ64TR-F has a total of 64 pins. The pin configuration is as follows:

Pin 1: VCC Pin 2: TXD1 Pin 3: RXD1 ... Pin 63: GND Pin 64: NC

Please refer to the datasheet for the complete pin configuration details.

Functional Features

  • Full-duplex operation
  • Programmable baud rate generator
  • Automatic hardware flow control
  • Interrupt-driven architecture
  • Support for modem control signals (CTS, RTS, DSR, DTR)
  • Parity generation and detection
  • Break generation and detection

Advantages and Disadvantages

Advantages: - High-performance UART with large FIFOs - Supports multiple serial communication standards - Low power consumption - Wide operating voltage range - Compact package size

Disadvantages: - Limited number of channels (4) - Requires external components for RS-232, RS-422, or RS-485 interface

Working Principles

The ST16C554CQ64TR-F is designed to facilitate serial communication between microcontrollers or other devices. It uses UART (Universal Asynchronous Receiver/Transmitter) technology to transmit and receive data in a serial format. The IC includes a programmable baud rate generator, FIFOs for buffering data, and various control features for efficient and reliable communication.

Detailed Application Field Plans

The ST16C554CQ64TR-F can be used in a wide range of applications that require serial communication, such as: - Industrial automation systems - Data acquisition systems - Embedded systems - Networking equipment - Point-of-sale terminals - Medical devices - Telecommunication devices

Alternative Models

Some alternative models to the ST16C554CQ64TR-F include: - MAX3100 - XR16L788 - SC16C754

Please note that these alternative models may have different specifications and pin configurations. It is important to refer to their respective datasheets for detailed information.

Word count: 400 words

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan ST16C554CQ64TR-F dalam solusi teknis

Sure! Here are 10 common questions and answers related to the application of ST16C554CQ64TR-F in technical solutions:

  1. Question: What is the ST16C554CQ64TR-F?
    Answer: The ST16C554CQ64TR-F is a quad UART (Universal Asynchronous Receiver/Transmitter) integrated circuit that provides four full-duplex asynchronous receiver/transmitter channels.

  2. Question: What are the key features of the ST16C554CQ64TR-F?
    Answer: Some key features include 16-byte transmit/receive FIFOs, programmable baud rate generators, support for IrDA SIR infrared communication, and compatibility with various microcontrollers and processors.

  3. Question: What are the typical applications of the ST16C554CQ64TR-F?
    Answer: The ST16C554CQ64TR-F is commonly used in applications such as industrial automation, embedded systems, networking equipment, point-of-sale terminals, and communication devices.

  4. Question: How many UART channels does the ST16C554CQ64TR-F provide?
    Answer: The ST16C554CQ64TR-F provides four independent UART channels, allowing simultaneous communication on multiple serial interfaces.

  5. Question: What is the maximum data transfer rate supported by the ST16C554CQ64TR-F?
    Answer: The ST16C554CQ64TR-F supports data transfer rates up to 1 Mbps, making it suitable for high-speed serial communication.

  6. Question: Can the ST16C554CQ64TR-F be used with both 3.3V and 5V systems?
    Answer: Yes, the ST16C554CQ64TR-F is compatible with both 3.3V and 5V systems, providing flexibility in system design.

  7. Question: Does the ST16C554CQ64TR-F support flow control?
    Answer: Yes, the ST16C554CQ64TR-F supports hardware flow control using RTS/CTS (Request to Send/Clear to Send) signals.

  8. Question: Can the ST16C554CQ64TR-F be used with different microcontrollers or processors?
    Answer: Yes, the ST16C554CQ64TR-F is compatible with various microcontrollers and processors, including popular ones like ARM, PIC, and AVR.

  9. Question: Is the ST16C554CQ64TR-F RoHS compliant?
    Answer: Yes, the ST16C554CQ64TR-F is RoHS (Restriction of Hazardous Substances) compliant, ensuring it meets environmental regulations.

  10. Question: Where can I find more information about the ST16C554CQ64TR-F?
    Answer: You can refer to the datasheet and technical documentation provided by the manufacturer or visit their official website for detailed information on the ST16C554CQ64TR-F.