EPCOS (TDK)
Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
B72214S0111K101
Lihat Detail Lembar Data

B72214S0111K101 Product Overview

Introduction

The B72214S0111K101 is a component belonging to the category of ceramic transient voltage suppressors (TVS). This entry provides an overview of its basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

Basic Information Overview

  • Category: Ceramic Transient Voltage Suppressors (TVS)
  • Use: Protection against voltage transients in electronic circuits
  • Characteristics: Fast response time, high surge capability, low clamping voltage
  • Package: SOD-123FL
  • Essence: Safeguarding sensitive electronic components from voltage spikes
  • Packaging/Quantity: Available in reels of 3000 units

Specifications

  • Part Number: B72214S0111K101
  • Voltage Rating: 11V
  • Peak Pulse Current: 30A
  • Operating Temperature Range: -55°C to +150°C
  • RoHS Compliance: Yes

Detailed Pin Configuration

The B72214S0111K101 has a standard SOD-123FL package with three pins. Pin 1 is the cathode, pin 2 is not connected, and pin 3 is the anode.

Functional Features

  • Transient Voltage Suppression: Provides protection against voltage transients by diverting excessive current away from sensitive components.
  • Fast Response Time: Reacts quickly to voltage spikes, safeguarding the circuitry from damage.
  • High Surge Capability: Can handle large surge currents without degradation.

Advantages and Disadvantages

Advantages

  • Effective protection against voltage transients
  • Fast response time
  • High surge capability

Disadvantages

  • Limited to specific voltage ratings
  • Requires careful consideration of placement in circuit design

Working Principles

The B72214S0111K101 operates based on the principle of avalanche breakdown. When a voltage transient occurs, the TVS device rapidly switches into its low impedance state, shunting the excess current away from the protected circuit.

Detailed Application Field Plans

The B72214S0111K101 is commonly used in various applications, including: - Power supplies - Communication equipment - Automotive electronics - Industrial control systems - Consumer electronics

Detailed and Complete Alternative Models

Some alternative models to the B72214S0111K101 include: - Bourns CDSOD323-T05LC - Littelfuse SMAJ11A - Vishay SMBJ11A

In conclusion, the B72214S0111K101 ceramic transient voltage suppressor offers effective protection against voltage transients in electronic circuits, making it a crucial component in ensuring the reliability and longevity of sensitive electronic devices.

Word Count: 398

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan B72214S0111K101 dalam solusi teknis

  1. What is the B72214S0111K101 component used for in technical solutions?

    • The B72214S0111K101 is a common mode choke designed to suppress electromagnetic interference in electronic circuits.

  2. How does the B72214S0111K101 help in reducing electromagnetic interference?

    • The B72214S0111K101 acts as a filter by attenuating common mode noise, thus improving the overall performance and reliability of the circuit.

  3. What are the typical applications of B72214S0111K101 in technical solutions?

    • The B72214S0111K101 is commonly used in power supplies, motor drives, inverters, and other electronic systems where EMI suppression is critical.

  4. What are the key specifications of the B72214S0111K101 that make it suitable for technical solutions?

    • The B72214S0111K101 typically has high impedance at the frequency range of interest, low DC resistance, and compact size for easy integration into various designs.

  5. Are there any specific design considerations when incorporating B72214S0111K101 in technical solutions?

    • It's important to consider the operating frequency range, current ratings, and voltage ratings to ensure proper selection and placement of the B72214S0111K101 in the circuit.

  6. Can the B72214S0111K101 be used in high-power applications?

    • Yes, the B72214S0111K101 is designed to handle high currents and can be used in high-power applications with appropriate derating and thermal considerations.

  7. What are the potential benefits of using B72214S0111K101 in technical solutions?

    • By effectively suppressing EMI, the B72214S0111K101 helps improve system reliability, reduce signal distortion, and comply with electromagnetic compatibility (EMC) standards.

  8. Are there any alternative components or technologies that can achieve similar results to B72214S0111K101?

    • Other common mode chokes, EMI filters, or ferrite beads may offer similar EMI suppression capabilities, but the suitability depends on specific application requirements.

  9. What are the environmental and reliability considerations for B72214S0111K101 in technical solutions?

    • The B72214S0111K101 is typically designed to meet industry standards for temperature, humidity, and mechanical stress, ensuring reliable performance in various environments.

  10. Where can I find detailed technical documentation and application notes for B72214S0111K101?

    • Detailed technical information, including datasheets and application notes, can be obtained from the manufacturer's website or through authorized distributors.