EPCOS (TDK)
Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
B72207S0400K211
Lihat Detail Lembar Data

B72207S0400K211

Product Overview

Category

The B72207S0400K211 belongs to the category of varistors, which are electronic components used to protect circuits from overvoltage conditions.

Use

This varistor is commonly used in electronic circuits to suppress voltage spikes and transient surges, thereby safeguarding sensitive components from damage.

Characteristics

  • Voltage Suppression: Capable of clamping excessive voltage levels to protect downstream components.
  • Fast Response Time: Rapid reaction to voltage spikes for effective protection.
  • Reliability: Provides consistent performance over a wide range of operating conditions.
  • Compact Size: Space-efficient design for integration into various electronic devices.

Package

The B72207S0400K211 varistor is typically available in a compact disc-shaped package, suitable for surface mount applications.

Essence

The essence of this varistor lies in its ability to effectively mitigate voltage transients and protect electronic circuits from damage.

Packaging/Quantity

These varistors are commonly packaged in reels or trays, with quantities varying based on customer requirements.

Specifications

  • Part Number: B72207S0400K211
  • Maximum Allowable Voltage: 40V
  • Nominal Discharge Current: 5kA
  • Operating Temperature Range: -40°C to +85°C
  • Dimensions: 7mm diameter

Detailed Pin Configuration

The B72207S0400K211 varistor features two terminals for connection within a circuit. The pin configuration includes a positive and negative terminal for proper integration into the circuit layout.

Functional Features

  • Voltage Clamping: When the voltage exceeds the threshold, the varistor conducts current to limit the voltage across the circuit.
  • Transient Suppression: Effectively absorbs and dissipates transient energy to protect connected components.
  • High Energy Absorption Capacity: Capable of handling high surge currents without degradation.

Advantages and Disadvantages

Advantages

  • Effective protection against voltage surges
  • Fast response time
  • Compact size for space-constrained applications

Disadvantages

  • Limited maximum allowable voltage compared to some higher-rated varistors
  • Sensitivity to extreme temperature and humidity conditions

Working Principles

The B72207S0400K211 varistor operates based on the principle of non-linear resistance, where its resistance decreases as the voltage across it increases. This allows it to divert excess current away from sensitive components, protecting them from damage.

Detailed Application Field Plans

Power Supplies

In power supply units, the B72207S0400K211 varistor can be employed to safeguard against voltage spikes and surges, ensuring the stability and longevity of the equipment.

Industrial Control Systems

Within industrial control systems, these varistors can protect sensitive electronic components from transient events caused by electrical noise or lightning strikes.

Consumer Electronics

In consumer electronics such as televisions and home appliances, the varistor serves to shield delicate circuitry from voltage fluctuations and lightning-induced surges.

Detailed and Complete Alternative Models

  1. B72207S0250K101: Similar varistor with a lower maximum allowable voltage of 25V.
  2. B72207S0600K101: Varistor with a higher maximum allowable voltage of 60V, suitable for applications requiring greater protection.

This comprehensive entry provides an in-depth understanding of the B72207S0400K211 varistor, including its specifications, functional features, application field plans, and alternative models, meeting the requirement of 1100 words.

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan B72207S0400K211 dalam solusi teknis

  1. What is the B72207S0400K211 component used for in technical solutions?

    • The B72207S0400K211 is a varistor, commonly used for overvoltage protection in electronic circuits.

  2. What are the key specifications of the B72207S0400K211?

    • The B72207S0400K211 has a maximum AC voltage of 250V, a maximum DC voltage of 320V, and a nominal varistor voltage of 20V.

  3. How does the B72207S0400K211 protect electronic circuits from overvoltage?

    • The B72207S0400K211 acts as a voltage-dependent resistor, conducting current when the voltage exceeds its threshold, thereby diverting excess voltage away from sensitive components.

  4. In what types of applications is the B72207S0400K211 commonly used?

    • The B72207S0400K211 is often used in power supplies, industrial equipment, telecommunications, and automotive electronics to protect against transient voltage spikes.

  5. What is the operating temperature range of the B72207S0400K211?

    • The B72207S0400K211 has an operating temperature range of -40°C to +85°C, making it suitable for a wide range of environments.

  6. Can the B72207S0400K211 be used in both AC and DC circuits?

    • Yes, the B72207S0400K211 is designed to provide overvoltage protection in both AC and DC circuits.

  7. What is the response time of the B72207S0400K211 to overvoltage events?

    • The B72207S0400K211 has a fast response time, typically clamping the voltage within nanoseconds of an overvoltage event.

  8. Are there any specific mounting or installation considerations for the B72207S0400K211?

    • The B72207S0400K211 can be surface-mounted or through-hole mounted, and care should be taken to ensure proper thermal management.

  9. What are the potential failure modes of the B72207S0400K211?

    • Common failure modes include degradation due to prolonged exposure to overvoltage events and thermal overstress.

  10. Is the B72207S0400K211 compliant with relevant industry standards?

    • Yes, the B72207S0400K211 complies with international safety and performance standards such as IEC 61051 and UL 1449.