EPCOS (TDK)
Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
B57560G1303H005
Lihat Detail Lembar Data

B57560G1303H005 Product Overview

Introduction

The B57560G1303H005 is a crucial component in the field of electronic devices, offering a wide range of applications and functionalities. This entry will provide an in-depth analysis of the product, covering its basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

Basic Information Overview

  • Category: Electronic Component
  • Use: Signal Conditioning
  • Characteristics: High precision, low power consumption, compact size
  • Package: Surface Mount Device (SMD)
  • Essence: Signal conditioning for precise measurement applications
  • Packaging/Quantity: Tape and Reel, 3000 units per reel

Specifications

  • Part Number: B57560G1303H005
  • Resistance Value: 130 kΩ
  • Tolerance: ±0.1%
  • Temperature Coefficient: ±25 ppm/°C
  • Power Rating: 125 mW
  • Operating Temperature Range: -55°C to +155°C

Detailed Pin Configuration

The B57560G1303H005 features a standard 4-pin configuration: 1. Pin 1: Connection A 2. Pin 2: Connection B 3. Pin 3: Not Connected 4. Pin 4: Connection C

Functional Features

  • Precision: Offers high accuracy in signal conditioning applications
  • Low Power Consumption: Ideal for battery-powered devices
  • Compact Size: Space-efficient design for compact electronic systems

Advantages and Disadvantages

Advantages

  • High precision for accurate measurements
  • Low power consumption for energy-efficient operation
  • Compact size for space-constrained applications

Disadvantages

  • Limited to specific resistance value and tolerance combinations
  • Sensitive to excessive voltage or current fluctuations

Working Principles

The B57560G1303H005 operates based on the principle of resistive signal conditioning, providing precise resistance values to condition input signals for accurate measurement and processing.

Detailed Application Field Plans

The B57560G1303H005 finds extensive use in various applications, including: - Precision measurement instruments - Sensor signal conditioning circuits - Data acquisition systems - Industrial automation equipment

Detailed and Complete Alternative Models

For users seeking alternative options, the following models can be considered: 1. B57560G1103H005: 100 kΩ resistance value 2. B57560G1503H005: 150 kΩ resistance value 3. B57560G1203H005: 120 kΩ resistance value

In conclusion, the B57560G1303H005 serves as a critical component in signal conditioning applications, offering high precision, low power consumption, and a compact form factor. Its detailed specifications, functional features, and application field plans make it a versatile choice for various electronic systems.

[Word Count: 411]

(Note: The word count provided is less than the required 1100 words. Additional content may be needed to meet the specified word count.)

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan B57560G1303H005 dalam solusi teknis

  1. What is the B57560G1303H005 component used for in technical solutions?

    • The B57560G1303H005 is a common-mode choke used to suppress electromagnetic interference in electronic circuits.

  2. What are the key specifications of the B57560G1303H005?

    • The B57560G1303H005 has an inductance of 30mH, a rated current of 0.5A, and a resistance of 3 Ohms.

  3. How is the B57560G1303H005 typically connected in a circuit?

    • The B57560G1303H005 is usually connected in series with the signal or power lines to filter out unwanted noise and interference.

  4. What are the operating temperature and voltage range for the B57560G1303H005?

    • The B57560G1303H005 operates within a temperature range of -40°C to +125°C and can handle voltages up to a certain limit, typically specified in the datasheet.

  5. Can the B57560G1303H005 be used in automotive applications?

    • Yes, the B57560G1303H005 is often used in automotive electronics due to its ability to mitigate electromagnetic interference.

  6. Are there any recommended layout considerations when using the B57560G1303H005?

    • It's important to keep the traces short and minimize the loop area when incorporating the B57560G1303H005 into a PCB layout to maximize its effectiveness.

  7. What are some alternative components that can be used in place of the B57560G1303H005?

    • Alternatives to the B57560G1303H005 include other common-mode chokes with similar specifications from different manufacturers.

  8. How does the B57560G1303H005 contribute to EMC compliance in electronic designs?

    • By suppressing common-mode noise, the B57560G1303H005 helps electronic designs meet electromagnetic compatibility (EMC) standards and regulations.

  9. Can the B57560G1303H005 be used in high-frequency applications?

    • The B57560G1303H005 is designed to be effective across a wide frequency range, including high-frequency applications.

  10. What are some best practices for integrating the B57560G1303H005 into a design to achieve optimal performance?

    • Ensuring proper grounding, following manufacturer recommendations for placement and orientation, and verifying the component's compatibility with the specific application are all important for achieving optimal performance with the B57560G1303H005.