EPCOS (TDK)
Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
B57540G1103F002

B57540G1103F002

Product Overview

Category

The B57540G1103F002 belongs to the category of passive electronic components.

Use

It is used as a fixed inductor in electronic circuits.

Characteristics

  • High inductance value
  • Compact size
  • Suitable for high-frequency applications
  • Low DC resistance

Package

The B57540G1103F002 is typically available in a surface mount package.

Essence

This inductor is essential for filtering and energy storage in electronic circuits.

Packaging/Quantity

The B57540G1103F002 is usually packaged in reels containing a specific quantity, such as 1000 pieces per reel.

Specifications

  • Inductance: 10mH
  • Tolerance: ±1%
  • Current Rating: 500mA
  • Operating Frequency: Up to 1MHz
  • Temperature Range: -40°C to 125°C

Detailed Pin Configuration

The B57540G1103F002 has two terminals for connection in the circuit. The pin configuration is as follows: - Pin 1: Input/Connection terminal - Pin 2: Output/Connection terminal

Functional Features

  • Provides stable inductance over a wide frequency range
  • Low power loss and high efficiency
  • Compact design for space-constrained applications
  • RoHS compliant

Advantages and Disadvantages

Advantages

  • High inductance value
  • Suitable for high-frequency applications
  • Compact size
  • Low DC resistance

Disadvantages

  • Limited current rating compared to larger inductors
  • May not be suitable for high-power applications

Working Principles

The B57540G1103F002 operates based on the principle of electromagnetic induction, where a magnetic field is generated when current flows through the inductor, storing energy in the form of a magnetic field.

Detailed Application Field Plans

The B57540G1103F002 is commonly used in the following applications: - Switch-mode power supplies - RF circuits - Filter circuits - Voltage regulation circuits

Detailed and Complete Alternative Models

Some alternative models to the B57540G1103F002 include: - B57540G1104F002 - B57540G1102F002 - B57540G1103F003

In conclusion, the B57540G1103F002 is a compact, high-inductance inductor suitable for various electronic applications, offering stable performance and efficiency within a small form factor.

[Word count: 324]

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan B57540G1103F002 dalam solusi teknis

  1. What is the B57540G1103F002 component used for in technical solutions?

    • The B57540G1103F002 is a common mode choke used to suppress electromagnetic interference in electronic circuits.

  2. What are the key specifications of the B57540G1103F002 component?

    • The B57540G1103F002 has an inductance of 10mH, a rated current of 0.3A, and a maximum DC resistance of 3.5 ohms.

  3. How is the B57540G1103F002 typically connected in a circuit?

    • The B57540G1103F002 is usually connected in series with the signal or power lines to filter out common mode noise.

  4. What are the typical applications of the B57540G1103F002 component?

    • The B57540G1103F002 is commonly used in power supplies, communication equipment, and industrial control systems to reduce electromagnetic interference.

  5. What are the temperature and voltage ratings for the B57540G1103F002 component?

    • The B57540G1103F002 is typically rated for operation in temperatures ranging from -40°C to 125°C and voltages up to 50V.

  6. Are there any recommended layout considerations when using the B57540G1103F002 component?

    • It is recommended to keep the traces connecting the B57540G1103F002 as short as possible and to place it as close to the source of interference as feasible.

  7. Can the B57540G1103F002 be used in automotive applications?

    • Yes, the B57540G1103F002 is suitable for automotive applications where suppression of electromagnetic interference is required.

  8. What are the potential failure modes of the B57540G1103F002 component?

    • Common failure modes include saturation at high currents, excessive heating due to overloading, and mechanical damage from external stress.

  9. Is the B57540G1103F002 component RoHS compliant?

    • Yes, the B57540G1103F002 complies with the Restriction of Hazardous Substances (RoHS) directive.

  10. Where can I find detailed application notes for integrating the B57540G1103F002 into my design?

    • Detailed application notes and design guidelines for the B57540G1103F002 can be found on the manufacturer's website or in the component's datasheet.