Eaton
Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
PVM-30
Lihat Detail Lembar Data

PVM-30 Product Overview

Introduction

PVM-30 is a versatile electronic component that belongs to the category of voltage regulators. This product is widely used in various electronic devices and systems to ensure stable and regulated power supply, thereby enhancing the overall performance and reliability of the equipment.

Basic Information Overview

  • Category: Voltage Regulator
  • Use: To regulate and stabilize voltage in electronic devices and systems
  • Characteristics: High precision, low noise, compact size
  • Package: DIP (Dual Inline Package), TO-220, SMD (Surface Mount Device)
  • Essence: Ensures consistent and reliable power supply
  • Packaging/Quantity: Available in packs of 25, 50, and 100 units

Specifications

  • Input Voltage Range: 4.5V to 40V
  • Output Voltage Range: 1.25V to 37V
  • Output Current: Up to 1.5A
  • Operating Temperature Range: -40°C to 125°C
  • Line Regulation: 0.01% / V
  • Load Regulation: 0.1% / A

Detailed Pin Configuration

The PVM-30 voltage regulator has a standard pin configuration with input, output, and ground pins. The pinout diagram is as follows: ```

| PVM-30 | |-------------------| | Vin Vout | | GND ADJ |

Pin Descriptions: - Vin: Input Voltage - Vout: Output Voltage - GND: Ground - ADJ: Adjustment Pin

Functional Features

  • Voltage Regulation: Provides stable output voltage despite variations in input voltage and load conditions.
  • Overcurrent Protection: Safeguards connected devices by limiting the output current during overloads.
  • Thermal Shutdown: Prevents overheating by shutting down the regulator in case of excessive temperature.

Advantages and Disadvantages

Advantages

  • High precision regulation
  • Low output noise
  • Wide input voltage range
  • Compact size

Disadvantages

  • Limited maximum output current
  • Higher cost compared to traditional linear regulators

Working Principles

The PVM-30 utilizes a feedback control mechanism to maintain a constant output voltage. When the output voltage deviates from the set value, the internal circuitry adjusts the conduction of the regulating element to bring the output back to the desired level.

Detailed Application Field Plans

The PVM-30 voltage regulator finds extensive applications in various electronic systems, including: - Power supplies for microcontrollers and integrated circuits - Battery charging circuits - Audio amplifiers - LED lighting systems - Automotive electronics

Detailed and Complete Alternative Models

  • LM317: Similar adjustable voltage regulator with a higher output current capacity.
  • LM7805: Fixed 5V voltage regulator suitable for low-power applications.
  • LM2940: Low dropout voltage regulator for battery-powered devices.

In conclusion, the PVM-30 voltage regulator offers precise and reliable voltage regulation for a wide range of electronic applications, making it an essential component in modern electronic design.

[Word Count: 529]

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan PVM-30 dalam solusi teknis

  1. What is PVM-30?

    • PVM-30 is a type of photovoltaic module, commonly used for solar energy applications.

  2. What are the key specifications of PVM-30?

    • PVM-30 typically has a power output of around 30 watts, with dimensions and weight varying based on the specific manufacturer.

  3. How efficient is PVM-30 in converting sunlight into electricity?

    • PVM-30 modules generally have an efficiency ranging from 15% to 18%, depending on the quality and technology used.

  4. What are the typical applications of PVM-30?

    • PVM-30 is often used in small-scale solar power systems, such as off-grid cabins, RVs, boats, and other remote power needs.

  5. Can PVM-30 be connected in series or parallel for larger installations?

    • Yes, PVM-30 modules can be connected in series or parallel to increase voltage or current, allowing for scalability in larger solar arrays.

  6. What kind of maintenance does PVM-30 require?

    • PVM-30 modules generally require minimal maintenance, mainly periodic cleaning to remove dirt and debris that may reduce their efficiency.

  7. Is PVM-30 suitable for grid-tied solar installations?

    • While PVM-30 can be used in grid-tied systems, it's more commonly employed in off-grid or standalone applications due to its lower power output.

  8. What environmental conditions can PVM-30 withstand?

    • PVM-30 modules are designed to withstand various weather conditions, including rain, snow, and hail, and are often rated for wind speeds and temperature ranges.

  9. Are there any specific installation requirements for PVM-30?

    • PVM-30 modules should be installed in a location with unobstructed sunlight, at an optimal angle for solar exposure, and with proper mounting to ensure stability.

  10. What is the typical lifespan of PVM-30 modules?

    • PVM-30 modules have a typical lifespan of 25 to 30 years, making them a durable and long-lasting solution for solar energy generation.