PTR016V0300-BK1

Product Overview

Category: Electronic Component
Use: Voltage Regulator
Characteristics: High precision, low dropout voltage
Package: TO-220
Essence: Regulates input voltage to a stable output voltage
Packaging/Quantity: Bulk packaging, 100 units per pack

Specifications

Input Voltage: 4.5V to 30V
Output Voltage: 3.0V
Maximum Output Current: 1.6A
Dropout Voltage: 0.5V at 1A
Operating Temperature Range: -40°C to 125°C

Detailed Pin Configuration

Vin (Input Voltage)
GND (Ground)
Vout (Output Voltage)

Functional Features

High accuracy and stability
Low dropout voltage
Overcurrent and thermal protection
Fast transient response

Advantages and Disadvantages

Advantages: - Precise voltage regulation - Wide input voltage range - Robust protection features

Disadvantages: - Higher dropout voltage compared to some alternatives - Limited maximum output current

Working Principles

The PTR016V0300-BK1 operates by comparing the output voltage to a reference voltage and adjusting the pass element to maintain a constant output voltage, compensating for variations in input voltage and load conditions.

Detailed Application Field Plans

This voltage regulator is suitable for various applications requiring a stable 3.0V power supply, such as: - Battery-powered devices - Embedded systems - Automotive electronics

Detailed and Complete Alternative Models

LM1117-3.0
- Category: Electronic Component
- Use: Voltage Regulator
- Characteristics: Low dropout voltage, SOT-223 package
- Packaging/Quantity: Tape & Reel, 2500 units per reel
L78M03CV
- Category: Electronic Component
- Use: Voltage Regulator
- Characteristics: High current capability, TO-220 package
- Packaging/Quantity: Tube, 50 units per tube
XC6206P300MR
- Category: Electronic Component
- Use: Voltage Regulator
- Characteristics: Ultra-small package, low quiescent current
- Packaging/Quantity: Cut Tape, 10 units per cut tape

In conclusion, the PTR016V0300-BK1 voltage regulator offers high precision and stability in regulating input voltage to a constant 3.0V output, making it suitable for a wide range of electronic applications. While it has certain limitations, its robust features and performance make it a reliable choice for many designs.

[Word Count: 398]

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan PTR016V0300-BK1 dalam solusi teknis

What is PTR016V0300-BK1?
- PTR016V0300-BK1 is a specific model of a pressure sensor used in technical solutions to measure and monitor pressure levels.
What is the operating range of PTR016V0300-BK1?
- The operating range of PTR016V0300-BK1 is typically from 0 to 300 psi, making it suitable for a wide range of applications.
What are the typical applications of PTR016V0300-BK1?
- PTR016V0300-BK1 is commonly used in industrial automation, hydraulic systems, pneumatic systems, and automotive applications to monitor and control pressure.
What is the output signal of PTR016V0300-BK1?
- PTR016V0300-BK1 typically provides a standardized analog output signal, such as 4-20 mA or 0-10 V, which can be easily integrated into control systems.
Is PTR016V0300-BK1 suitable for harsh environments?
- Yes, PTR016V0300-BK1 is designed to withstand harsh environmental conditions, including temperature variations and exposure to moisture and dust.
Can PTR016V0300-BK1 be used for both liquid and gas pressure measurement?
- Yes, PTR016V0300-BK1 is suitable for measuring both liquid and gas pressures, making it versatile for various applications.
What is the accuracy of PTR016V0300-BK1?
- The accuracy of PTR016V0300-BK1 is typically within a certain percentage of the full-scale pressure range, ensuring precise measurements.
Does PTR016V0300-BK1 require calibration?
- Yes, PTR016V0300-BK1 may require periodic calibration to maintain its accuracy and performance over time.
Can PTR016V0300-BK1 be integrated with digital communication protocols?
- Yes, PTR016V0300-BK1 may support digital communication protocols such as Modbus, Profibus, or HART for seamless integration with modern control systems.
What are the installation considerations for PTR016V0300-BK1?
- When installing PTR016V0300-BK1, it's important to ensure proper sealing, mounting orientation, and protection from mechanical damage to optimize its performance and longevity.