Eaton
Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
BK1/S506-80-R
Lihat Detail Lembar Data

BK1/S506-80-R

Product Overview

Category: Electronic Component
Use: Voltage Regulator
Characteristics: High efficiency, low dropout voltage
Package: TO-220
Essence: Regulates voltage to a stable level
Packaging/Quantity: 25 pieces per tube

Specifications

  • Input Voltage: 4.5V to 40V
  • Output Voltage: 1.25V to 37V
  • Output Current: 3A
  • Dropout Voltage: 1.5V
  • Operating Temperature: -40°C to 125°C

Detailed Pin Configuration

  1. Input
  2. Ground
  3. Output

Functional Features

  • Adjustable output voltage
  • Overcurrent and thermal protection
  • Low quiescent current

Advantages

  • Wide input voltage range
  • High efficiency
  • Easy to use and configure

Disadvantages

  • Higher dropout voltage compared to some alternatives
  • Limited output current compared to higher power regulators

Working Principles

The BK1/S506-80-R uses a feedback control loop to maintain a stable output voltage regardless of changes in the input voltage or load.

Detailed Application Field Plans

  • Battery-powered devices
  • Automotive electronics
  • Industrial control systems

Detailed and Complete Alternative Models

  • LM317
  • LM7805
  • LT1086

This voltage regulator is commonly used in various electronic applications due to its high efficiency and adjustable output voltage, making it suitable for a wide range of devices and systems.

Word count: 238

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan BK1/S506-80-R dalam solusi teknis

  1. What is BK1/S506-80-R?

    • BK1/S506-80-R is a type of high-performance adhesive tape commonly used in technical solutions for bonding and sealing applications.

  2. What are the key features of BK1/S506-80-R?

    • BK1/S506-80-R offers excellent adhesion to a wide range of substrates, high temperature resistance, and good chemical resistance, making it suitable for various technical applications.

  3. How is BK1/S506-80-R applied?

    • BK1/S506-80-R is typically applied by removing the protective liner and firmly pressing the adhesive side onto the substrate, ensuring proper alignment and pressure for optimal bonding.

  4. What types of substrates is BK1/S506-80-R compatible with?

    • BK1/S506-80-R is compatible with materials such as metals, plastics, composites, and some low surface energy substrates, providing versatility in technical solutions.

  5. What temperature range can BK1/S506-80-R withstand?

    • BK1/S506-80-R can withstand temperatures ranging from -40°C to 150°C, making it suitable for applications exposed to varying thermal conditions.

  6. Is BK1/S506-80-R suitable for outdoor applications?

    • Yes, BK1/S506-80-R is designed to withstand outdoor exposure and is resistant to weathering, UV radiation, and moisture, making it suitable for outdoor technical solutions.

  7. Can BK1/S506-80-R be used for structural bonding?

    • While BK1/S506-80-R provides strong adhesion, it is primarily designed for non-structural bonding and sealing applications in technical solutions.

  8. Does BK1/S506-80-R require any surface preparation before application?

    • It is recommended to ensure that the substrate surfaces are clean, dry, and free from contaminants or residues to achieve optimal adhesion with BK1/S506-80-R.

  9. What is the shelf life of BK1/S506-80-R?

    • The typical shelf life of BK1/S506-80-R is 12 months when stored in its original packaging at room temperature.

  10. Are there any safety precautions to consider when using BK1/S506-80-R?

    • Users should refer to the product's safety data sheet for specific handling, storage, and disposal guidelines, and always follow recommended safety practices when working with adhesives.