Eaton
Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
BK/ATM-15
Lihat Detail Lembar Data

BK/ATM-15

Product Overview

Category: Integrated Circuits
Use: Power Management
Characteristics: High efficiency, compact design
Package: TO-220
Essence: Voltage Regulator
Packaging/Quantity: 1 piece

Specifications

  • Input Voltage: 7V to 35V
  • Output Voltage: 5V
  • Output Current: 1.5A
  • Dropout Voltage: 2V
  • Operating Temperature: -40°C to 125°C

Detailed Pin Configuration

  1. Vin (Input Voltage)
  2. Vout (Output Voltage)
  3. GND (Ground)

Functional Features

  • Overcurrent Protection
  • Thermal Shutdown
  • Short Circuit Protection

Advantages and Disadvantages

Advantages: - Wide input voltage range - Compact design - Built-in protection features

Disadvantages: - Limited output current - Higher dropout voltage compared to some alternatives

Working Principles

The BK/ATM-15 is a linear voltage regulator that maintains a stable 5V output voltage regardless of variations in the input voltage. It achieves this by dissipating excess power as heat, making it suitable for low to moderate power applications.

Detailed Application Field Plans

The BK/ATM-15 is commonly used in various electronic devices such as: - Automotive electronics - Industrial control systems - Portable electronic devices

Detailed and Complete Alternative Models

  1. LM7805
  2. L78M05
  3. UA7805

In conclusion, the BK/ATM-15 is a versatile voltage regulator with a wide input voltage range and built-in protection features, making it suitable for a variety of applications in different industries.

[Word Count: 235]

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan BK/ATM-15 dalam solusi teknis

  1. What is BK/ATM-15?

    • BK/ATM-15 is a type of epoxy adhesive commonly used in technical solutions for bonding, sealing, and potting applications.

  2. What are the key features of BK/ATM-15?

    • BK/ATM-15 offers high thermal conductivity, excellent adhesion to various substrates, and good chemical resistance, making it suitable for demanding technical applications.

  3. How is BK/ATM-15 applied?

    • BK/ATM-15 is typically applied by mixing its components in the specified ratio and then dispensing or spreading the adhesive onto the surfaces to be bonded or sealed.

  4. What types of materials can BK/ATM-15 bond?

    • BK/ATM-15 can bond a wide range of materials including metals, ceramics, glass, and many plastics, making it versatile for various technical solutions.

  5. Is BK/ATM-15 suitable for high-temperature applications?

    • Yes, BK/ATM-15 is designed to withstand high temperatures, making it suitable for applications where thermal management is crucial.

  6. Can BK/ATM-15 be used for electrical insulation?

    • Yes, BK/ATM-15 provides good electrical insulation properties, making it suitable for potting and encapsulation of electronic components.

  7. What is the curing time for BK/ATM-15?

    • The curing time for BK/ATM-15 can vary based on factors such as temperature and application thickness, but it typically cures within a few hours at room temperature.

  8. Does BK/ATM-15 require special surface preparation before application?

    • It is recommended to clean and degrease the surfaces to be bonded or sealed before applying BK/ATM-15 to ensure optimal adhesion.

  9. Is BK/ATM-15 resistant to chemicals and environmental exposure?

    • Yes, BK/ATM-15 exhibits good resistance to chemicals, moisture, and environmental exposure, providing long-term durability in harsh conditions.

  10. Are there any safety precautions to consider when using BK/ATM-15?

    • Users should follow the safety guidelines provided by the manufacturer, which may include wearing protective equipment and ensuring adequate ventilation during application.