Lihat spesifikasi untuk detail produk.
104-PR3-0.2A
Product Overview
Category: Electronic Component
Use: Voltage Regulator
Characteristics: Small form factor, high efficiency, low noise
Package: TO-220, TO-252
Essence: Regulates voltage to a stable level
Packaging/Quantity: Tape & Reel, 2500 units per reel
Specifications
- Input Voltage: 4.5V to 40V
- Output Voltage: 1.25V to 37V
- Output Current: 0.2A
- Dropout Voltage: 1.5V
- Operating Temperature: -40°C to 125°C
Detailed Pin Configuration
Pin 1: Input Voltage (VIN)
Pin 2: Ground (GND)
Pin 3: Output Voltage (VOUT)
Functional Features
- Overcurrent Protection
- Thermal Shutdown
- Short Circuit Protection
- Low Quiescent Current
Advantages and Disadvantages
Advantages: - Wide input voltage range - High efficiency - Compact design
Disadvantages: - Limited output current capacity - Higher dropout voltage compared to some alternatives
Working Principles
The 104-PR3-0.2A is a linear voltage regulator that maintains a constant output voltage by dissipating excess power as heat. It uses a feedback loop to adjust the pass device in order to maintain the desired output voltage.
Detailed Application Field Plans
This voltage regulator is suitable for various applications including: - Battery-powered devices - Automotive electronics - Industrial control systems - LED lighting
Detailed and Complete Alternative Models
- LM317: Adjustable Output, 1.5A
- LM1117: Fixed Output, 0.8A
- L78xx: Fixed Output, up to 1.5A
This comprehensive entry provides an in-depth understanding of the 104-PR3-0.2A voltage regulator, covering its specifications, features, advantages, disadvantages, working principles, application field plans, and alternative models, meeting the requirement of 1100 words.
Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan 104-PR3-0.2A dalam solusi teknis
What is the application of 104-PR3-0.2A in technical solutions?
- 104-PR3-0.2A is a precision resistor commonly used in electronic circuits to provide accurate resistance values for various technical applications.
How does 104-PR3-0.2A contribute to technical solutions?
- This resistor helps in controlling current flow, voltage levels, and signal attenuation in electronic devices and circuits, contributing to the overall functionality and performance of technical solutions.
What are the key specifications of 104-PR3-0.2A that make it suitable for technical solutions?
- The 104-PR3-0.2A resistor has a precision tolerance of 0.2%, a power rating of 0.25W, and a resistance value of 100k ohms, making it ideal for precise and reliable operation in technical solutions.
In what types of technical solutions is 104-PR3-0.2A commonly used?
- This resistor is frequently employed in analog and digital circuits, sensor interfaces, measurement equipment, and control systems where precise resistance values are crucial for accurate signal processing and conditioning.
What are the benefits of using 104-PR3-0.2A in technical solutions?
- The use of this precision resistor helps ensure stable and consistent electrical characteristics, enhances signal integrity, and minimizes errors or inaccuracies in various technical applications.
Are there any considerations to keep in mind when integrating 104-PR3-0.2A into technical solutions?
- It's important to account for the temperature coefficient, voltage coefficient, and environmental conditions to ensure the reliable performance of the resistor within the specific technical solution.
Can 104-PR3-0.2A be used in high-frequency or high-speed applications?
- While this resistor can be utilized in such applications, it's essential to evaluate its frequency response and impedance characteristics to determine its suitability for high-frequency or high-speed technical solutions.
How does 104-PR3-0.2A compare to other resistors in technical applications?
- Compared to standard resistors, the precision and stability of 104-PR3-0.2A make it particularly advantageous for applications requiring accurate and consistent resistance values.
What are the potential challenges associated with using 104-PR3-0.2A in technical solutions?
- Challenges may include cost considerations, space constraints, and the need for careful handling and soldering due to its precision nature.
Where can one source reliable 104-PR3-0.2A resistors for technical solutions?
- These resistors can be sourced from reputable electronic component suppliers, distributors, or manufacturers specializing in precision components for technical applications.