Diodes Incorporated
Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
ZLDO1117G33TA
Lihat Detail Lembar Data

ZLDO1117G33TA

Product Overview

Category

ZLDO1117G33TA belongs to the category of low-dropout voltage regulators.

Use

It is commonly used to regulate and stabilize voltage in various electronic circuits.

Characteristics

  • Low dropout voltage: The ZLDO1117G33TA has a very low dropout voltage, ensuring efficient regulation even when the input voltage is close to the desired output voltage.
  • High current capability: This voltage regulator can handle high currents, making it suitable for power-hungry applications.
  • Thermal protection: The device incorporates thermal shutdown circuitry to prevent damage due to excessive heat.
  • Adjustable output voltage: The output voltage can be adjusted within a specific range to meet different requirements.

Package

The ZLDO1117G33TA comes in a small surface-mount package, making it suitable for compact designs.

Essence

The essence of ZLDO1117G33TA lies in its ability to provide stable and regulated voltage, ensuring proper functioning of electronic devices.

Packaging/Quantity

This product is typically packaged in reels or tubes, with quantities varying based on customer requirements.

Specifications

  • Input Voltage Range: 2.5V - 6V
  • Output Voltage: 3.3V
  • Dropout Voltage: 0.4V (typical)
  • Maximum Output Current: 800mA
  • Operating Temperature Range: -40°C to +125°C

Detailed Pin Configuration

The ZLDO1117G33TA has three pins:

  1. VIN (Input): This pin is connected to the input voltage source.
  2. VOUT (Output): The regulated output voltage is obtained from this pin.
  3. GND (Ground): This pin is connected to the ground reference.

Functional Features

  • Voltage Regulation: The ZLDO1117G33TA maintains a constant output voltage despite variations in the input voltage and load conditions.
  • Short Circuit Protection: The device is equipped with short circuit protection, preventing damage to the regulator and connected components in case of a short circuit.
  • Low Quiescent Current: The quiescent current of this voltage regulator is very low, minimizing power consumption when the load is light.

Advantages and Disadvantages

Advantages

  • High current capability allows it to handle demanding applications.
  • Low dropout voltage ensures efficient regulation even with small input-output voltage differentials.
  • Thermal protection prevents overheating and potential damage.
  • Adjustable output voltage provides flexibility for various applications.

Disadvantages

  • Limited input voltage range (2.5V - 6V).
  • Maximum output current may not be sufficient for certain high-power applications.

Working Principles

The ZLDO1117G33TA operates based on the principle of a linear voltage regulator. It uses a pass transistor to regulate the output voltage by adjusting the resistance between the input and output terminals. This creates a stable output voltage that remains relatively constant despite changes in the input voltage or load conditions.

Detailed Application Field Plans

The ZLDO1117G33TA finds applications in various electronic devices and systems, including but not limited to: - Battery-powered devices - Embedded systems - Consumer electronics - Industrial control systems - Automotive electronics

Detailed and Complete Alternative Models

  1. LM1117-3.3: A popular alternative with similar specifications and features.
  2. LT1763-3.3: Another alternative offering high accuracy and low dropout voltage.
  3. MCP1703-3302E: An alternative with a wide input voltage range and low quiescent current.

These alternatives can be considered based on specific requirements and design constraints.

Word count: 352 words

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan ZLDO1117G33TA dalam solusi teknis

Sure! Here are 10 common questions and answers related to the application of ZLDO1117G33TA in technical solutions:

  1. Q: What is ZLDO1117G33TA? A: ZLDO1117G33TA is a low dropout linear voltage regulator IC that provides a fixed output voltage of 3.3V.

  2. Q: What is the input voltage range for ZLDO1117G33TA? A: The input voltage range for ZLDO1117G33TA is typically between 4.5V and 15V.

  3. Q: What is the maximum output current of ZLDO1117G33TA? A: The maximum output current of ZLDO1117G33TA is 800mA.

  4. Q: Can ZLDO1117G33TA be used to regulate voltages other than 3.3V? A: No, ZLDO1117G33TA is specifically designed to provide a fixed output voltage of 3.3V.

  5. Q: Is ZLDO1117G33TA suitable for battery-powered applications? A: Yes, ZLDO1117G33TA has a low dropout voltage and low quiescent current, making it suitable for battery-powered applications.

  6. Q: Does ZLDO1117G33TA require any external components for operation? A: Yes, ZLDO1117G33TA requires input and output capacitors for stability and proper operation.

  7. Q: What is the thermal resistance of ZLDO1117G33TA? A: The thermal resistance of ZLDO1117G33TA is typically around 50°C/W.

  8. Q: Can ZLDO1117G33TA handle short-circuit conditions? A: Yes, ZLDO1117G33TA has built-in current limiting and thermal shutdown protection to handle short-circuit conditions.

  9. Q: Is ZLDO1117G33TA available in different package options? A: Yes, ZLDO1117G33TA is available in various package options such as SOT-223, TO-252, and D2PAK.

  10. Q: What are some typical applications for ZLDO1117G33TA? A: ZLDO1117G33TA is commonly used in various electronic devices and systems, including microcontrollers, sensors, communication modules, and power management circuits.

Please note that the answers provided here are general and may vary depending on specific datasheet specifications and application requirements.