Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
PI3HDMI1210-ABE

PI3HDMI1210-ABE

Product Overview

Category

The PI3HDMI1210-ABE belongs to the category of HDMI (High-Definition Multimedia Interface) signal switches.

Use

It is primarily used for switching and routing HDMI signals in electronic devices such as televisions, monitors, projectors, and audio/video receivers.

Characteristics

  • Supports high-definition video resolutions up to 4K Ultra HD.
  • Provides seamless switching between multiple HDMI sources.
  • Offers advanced features like HDCP (High-bandwidth Digital Content Protection) support and EDID (Extended Display Identification Data) management.
  • Enables audio extraction and embedding.
  • Supports CEC (Consumer Electronics Control) for remote control functionality.
  • Low power consumption and compact size.

Package

The PI3HDMI1210-ABE comes in a small form factor package, making it suitable for space-constrained applications. It is available in a surface-mount package.

Essence

The essence of the PI3HDMI1210-ABE lies in its ability to efficiently switch and route HDMI signals while maintaining high-quality video and audio transmission.

Packaging/Quantity

The PI3HDMI1210-ABE is typically packaged in reels or trays, depending on the manufacturer's specifications. The quantity per package varies but is commonly around 250 units.

Specifications

  • HDMI Compliance: HDMI 2.0b
  • Maximum Video Resolution: 4K Ultra HD (3840x2160 @ 60Hz)
  • Maximum Data Rate: 6 Gbps per channel
  • Power Supply Voltage: 3.3V
  • Operating Temperature Range: -40°C to +85°C
  • Package Type: QFN (Quad Flat No-Lead)

Detailed Pin Configuration

The PI3HDMI1210-ABE has a total of 32 pins. Here is a detailed pin configuration:

  1. Pin 1: VDD (Power Supply)
  2. Pin 2: GND (Ground)
  3. Pin 3: HPD (Hot Plug Detect)
  4. Pin 4: CEC (Consumer Electronics Control)
  5. Pin 5: SDA (I2C Data)
  6. Pin 6: SCL (I2C Clock)
  7. Pin 7: DDC/CEC (Display Data Channel / Consumer Electronics Control)
  8. Pin 8: TMDS Data 2-
  9. Pin 9: TMDS Data 2+
  10. Pin 10: TMDS Data 0-
  11. Pin 11: TMDS Data 0+
  12. Pin 12: TMDS Data 1-
  13. Pin 13: TMDS Data 1+
  14. Pin 14: TMDS Clock Shield
  15. Pin 15: TMDS Clock+
  16. Pin 16: TMDS Clock-
  17. Pin 17: VDD (Power Supply)
  18. Pin 18: GND (Ground)
  19. Pin 19: VDD (Power Supply)
  20. Pin 20: GND (Ground)
  21. Pin 21: VDD (Power Supply)
  22. Pin 22: GND (Ground)
  23. Pin 23: VDD (Power Supply)
  24. Pin 24: GND (Ground)
  25. Pin 25: VDD (Power Supply)
  26. Pin 26: GND (Ground)
  27. Pin 27: VDD (Power Supply)
  28. Pin 28: GND (Ground)
  29. Pin 29: VDD (Power Supply)
  30. Pin 30: GND (Ground)
  31. Pin 31: VDD (Power Supply)
  32. Pin 32: GND (Ground)

Functional Features

  • HDMI signal switching and routing.
  • HDCP support for secure content transmission.
  • EDID management for optimal display compatibility.
  • Audio extraction and embedding capabilities.
  • CEC functionality for remote control integration.

Advantages and Disadvantages

Advantages

  • High-definition video and audio transmission.
  • Seamless switching between multiple HDMI sources.
  • Compact size for space-constrained applications.
  • Low power consumption.
  • Advanced features like HDCP and EDID support.

Disadvantages

  • Limited to HDMI signal switching and routing only.
  • May require additional components for complex audio/video setups.

Working Principles

The PI3HDMI1210-ABE operates by receiving HDMI signals from multiple sources and selectively routing them to a single output. It utilizes advanced signal processing techniques to ensure high-quality video and audio transmission. The integrated HDCP support ensures secure content delivery, while the EDID management optimizes display compatibility. The device also allows for audio extraction and embedding, enabling flexible audio configurations.

Detailed Application Field Plans

The PI3HDMI1210-ABE finds application in various electronic devices

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan PI3HDMI1210-ABE dalam solusi teknis

Sure! Here are 10 common questions and answers related to the application of PI3HDMI1210-ABE in technical solutions:

  1. Q: What is the PI3HDMI1210-ABE? A: The PI3HDMI1210-ABE is a high-speed HDMI switch with signal conditioning and level shifting capabilities.

  2. Q: What are the key features of the PI3HDMI1210-ABE? A: The key features include support for HDMI 2.0b, 4K resolution at 60Hz, HDCP 2.2 content protection, and automatic input detection.

  3. Q: How many HDMI inputs does the PI3HDMI1210-ABE support? A: The PI3HDMI1210-ABE supports up to three HDMI inputs.

  4. Q: Can the PI3HDMI1210-ABE be used in automotive applications? A: Yes, the PI3HDMI1210-ABE is designed to meet the stringent requirements of automotive applications.

  5. Q: Does the PI3HDMI1210-ABE require an external power supply? A: Yes, the PI3HDMI1210-ABE requires a 3.3V power supply for operation.

  6. Q: What is the maximum data rate supported by the PI3HDMI1210-ABE? A: The PI3HDMI1210-ABE supports a maximum data rate of 6 Gbps per channel.

  7. Q: Can the PI3HDMI1210-ABE be cascaded to support more than three HDMI inputs? A: No, the PI3HDMI1210-ABE does not support cascading for additional HDMI inputs.

  8. Q: Does the PI3HDMI1210-ABE support audio extraction? A: No, the PI3HDMI1210-ABE does not have built-in audio extraction capabilities.

  9. Q: What is the operating temperature range of the PI3HDMI1210-ABE? A: The PI3HDMI1210-ABE has an operating temperature range of -40°C to +85°C.

  10. Q: Can the PI3HDMI1210-ABE be used in low-power applications? A: Yes, the PI3HDMI1210-ABE has a low-power standby mode and supports power-saving features.

Please note that these answers are general and may vary depending on the specific implementation and requirements of your technical solution.