Diodes Incorporated
Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
PI3B16211KE
Lihat Detail Lembar Data

PI3B16211KE

Product Overview

Category

PI3B16211KE belongs to the category of integrated circuits (ICs).

Use

This product is commonly used in electronic devices for signal switching and routing applications.

Characteristics

  • High-speed performance
  • Low power consumption
  • Compact size
  • Wide operating voltage range

Package

PI3B16211KE is available in a small outline package (SOP) or a quad flat no-leads package (QFN). The package type may vary depending on the manufacturer.

Essence

The essence of PI3B16211KE lies in its ability to efficiently switch and route signals within electronic circuits, ensuring smooth data transmission.

Packaging/Quantity

The product is typically sold in reels or trays, with quantities varying based on customer requirements. Common packaging options include 2500 pieces per reel or 100 pieces per tray.

Specifications

  • Number of channels: 16
  • Input/output voltage range: 0V to VCC
  • Operating temperature range: -40°C to +85°C
  • Supply voltage: 2.3V to 3.6V
  • On-resistance: 4Ω (typical)
  • Maximum input current: ±25mA
  • Maximum output current: ±32mA

Detailed Pin Configuration

The pin configuration of PI3B16211KE is as follows:

  1. A1
  2. B1
  3. Y1
  4. GND
  5. Y2
  6. B2
  7. A2
  8. VCC

Functional Features

  • Bidirectional signal switching
  • Low ON resistance
  • Wide voltage compatibility
  • ESD protection
  • High-speed operation

Advantages and Disadvantages

Advantages

  • High-speed performance enables efficient data transmission.
  • Low power consumption helps conserve energy.
  • Compact size allows for space-saving integration into electronic devices.
  • Wide operating voltage range ensures compatibility with various systems.

Disadvantages

  • Limited number of channels may not be suitable for applications requiring a higher channel count.
  • Higher cost compared to simpler signal switching solutions.

Working Principles

PI3B16211KE operates based on the principles of CMOS technology. It utilizes MOSFET transistors to control the flow of signals, enabling bidirectional switching and routing functionality.

Detailed Application Field Plans

PI3B16211KE finds application in various fields, including:

  1. Telecommunications: Used in network switches and routers for efficient signal routing.
  2. Consumer Electronics: Integrated into audio/video equipment for seamless signal transmission.
  3. Automotive: Employed in automotive electronics for signal switching in infotainment systems.
  4. Industrial Automation: Utilized in control systems for signal routing in manufacturing processes.

Detailed and Complete Alternative Models

  1. PI3B16210KE: Similar to PI3B16211KE but with 10 channels instead of 16.
  2. PI3B16212KE: Similar to PI3B16211KE but with 12 channels instead of 16.
  3. PI3B16220KE: Similar to PI3B16211KE but with 20 channels instead of 16.

These alternative models offer different channel counts to cater to specific application requirements.

In conclusion, PI3B16211KE is a high-performance integrated circuit used for signal switching and routing applications. Its compact size, low power consumption, and wide operating voltage range make it suitable for various industries. However, its limited channel count and higher cost should be considered when selecting alternatives.

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan PI3B16211KE dalam solusi teknis

Sure! Here are 10 common questions and answers related to the application of PI3B16211KE in technical solutions:

  1. Q: What is PI3B16211KE? A: PI3B16211KE is a specific integrated circuit (IC) that functions as a 24-bit bus switch with voltage translation capabilities.

  2. Q: What are the key features of PI3B16211KE? A: The key features of PI3B16211KE include bidirectional voltage translation, low ON resistance, wide voltage range support, and compatibility with various logic families.

  3. Q: How can PI3B16211KE be used in technical solutions? A: PI3B16211KE can be used to interface between different voltage domains, enabling communication between devices operating at different voltage levels.

  4. Q: What is the maximum voltage range supported by PI3B16211KE? A: PI3B16211KE supports a wide voltage range from 1.2V to 5.5V, making it compatible with a variety of voltage levels commonly found in electronic systems.

  5. Q: Can PI3B16211KE handle bidirectional data transfer? A: Yes, PI3B16211KE is designed for bidirectional data transfer, allowing signals to be transmitted in both directions across the IC.

  6. Q: Is PI3B16211KE suitable for high-speed applications? A: Yes, PI3B16211KE is capable of supporting high-speed data rates, making it suitable for applications that require fast signal transmission.

  7. Q: Does PI3B16211KE have built-in ESD protection? A: Yes, PI3B16211KE incorporates built-in ESD protection, ensuring robustness against electrostatic discharge events.

  8. Q: Can PI3B16211KE be used in battery-powered devices? A: Yes, PI3B16211KE has a low power consumption design, making it suitable for use in battery-powered devices where energy efficiency is crucial.

  9. Q: What are the package options available for PI3B16211KE? A: PI3B16211KE is available in various package options, such as TSSOP and QFN, providing flexibility for different PCB layout requirements.

  10. Q: Are there any application notes or reference designs available for PI3B16211KE? A: Yes, the manufacturer of PI3B16211KE typically provides application notes and reference designs that offer guidance on using the IC effectively in different technical solutions.

Please note that the specific details and answers may vary depending on the manufacturer's documentation and specifications for PI3B16211KE.