Diodes Incorporated
Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
MBRB20100CT-13
Lihat Detail Lembar Data

MBRB20100CT-13

Introduction

The MBRB20100CT-13 is a diode belonging to the category of Schottky rectifier diodes. This entry provides an overview of the basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models of the MBRB20100CT-13.

Basic Information Overview

  • Category: Schottky rectifier diode
  • Use: It is commonly used in power supply applications, voltage clamping, and reverse polarity protection.
  • Characteristics: The MBRB20100CT-13 exhibits low forward voltage drop, high current capability, and fast switching speed.
  • Package: The diode is typically available in a TO-263AB package.
  • Essence: It serves as a high-efficiency rectifier with low power dissipation.
  • Packaging/Quantity: The diode is usually supplied in reels or tubes, with quantities varying based on manufacturer and distributor.

Specifications

  • Voltage Rating: 100V
  • Current Rating: 20A
  • Forward Voltage Drop: Typically around 0.55V at 10A
  • Reverse Leakage Current: Maximum of 500µA at 100V
  • Operating Temperature Range: -65°C to +175°C

Detailed Pin Configuration

The MBRB20100CT-13 typically has three pins: 1. Anode (A) 2. Cathode (K) 3. Not connected (NC)

Functional Features

  • Low forward voltage drop ensures high efficiency.
  • Fast switching speed allows for rapid response in power supply applications.
  • High current capability enables it to handle substantial loads.

Advantages and Disadvantages

Advantages

  • High efficiency due to low forward voltage drop.
  • Fast switching speed for quick response in circuits.
  • High current capability makes it suitable for power applications.

Disadvantages

  • Higher cost compared to standard silicon diodes.
  • Sensitive to voltage spikes and transients.

Working Principles

The MBRB20100CT-13 operates based on the Schottky barrier principle, where the metal-semiconductor junction results in lower forward voltage drop compared to conventional PN-junction diodes. When forward biased, the diode allows current flow with minimal voltage loss, making it suitable for high-efficiency applications.

Detailed Application Field Plans

The MBRB20100CT-13 finds extensive use in various applications, including: - Power supply units - Voltage clamping circuits - Reverse polarity protection circuits - DC-DC converters - Solar panel bypass diodes

Detailed and Complete Alternative Models

Some alternative models to the MBRB20100CT-13 include: - SB20100CT: Similar specifications and characteristics - SS24: Lower current rating but compatible for certain applications - MBRB2045CT: Higher voltage rating and similar current capability

In conclusion, the MBRB20100CT-13 is a versatile Schottky rectifier diode with high efficiency, fast switching speed, and high current capability, making it suitable for various power supply and voltage clamping applications.

Word count: 411

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan MBRB20100CT-13 dalam solusi teknis

  1. What is the MBRB20100CT-13?

    • The MBRB20100CT-13 is a Schottky barrier rectifier diode designed for high efficiency and low power loss in applications such as power supplies, converters, and freewheeling diodes.

  2. What is the maximum forward voltage of the MBRB20100CT-13?

    • The maximum forward voltage of the MBRB20100CT-13 is typically around 0.55V at a forward current of 10A.

  3. What is the reverse voltage rating of the MBRB20100CT-13?

    • The MBRB20100CT-13 has a reverse voltage rating of 100V.

  4. What are the typical applications of the MBRB20100CT-13?

    • Typical applications include switch mode power supplies, freewheeling diodes, OR-ing diodes, and reverse battery protection.

  5. What is the maximum average forward current of the MBRB20100CT-13?

    • The maximum average forward current is 20A when operating at a temperature of 125°C.

  6. What is the thermal resistance of the MBRB20100CT-13?

    • The thermal resistance from junction to case is typically 3.0°C/W.

  7. What is the storage temperature range for the MBRB20100CT-13?

    • The storage temperature range is -65°C to 175°C.

  8. Does the MBRB20100CT-13 have a low leakage current?

    • Yes, the MBRB20100CT-13 has a low reverse leakage current, making it suitable for high-efficiency applications.

  9. Is the MBRB20100CT-13 RoHS compliant?

    • Yes, the MBRB20100CT-13 is RoHS compliant, meeting environmental standards.

  10. Can the MBRB20100CT-13 be used in automotive applications?

    • Yes, the MBRB20100CT-13 is suitable for automotive systems such as DC/DC converters and motor drives due to its high efficiency and reliability.