Diodes Incorporated
Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
MBRB10200CT-13
Lihat Detail Lembar Data

MBRB10200CT-13

Introduction

The MBRB10200CT-13 is a diode belonging to the category of Schottky rectifier diodes. This entry provides an overview of its basic information, specifications, detailed pin configuration, functional features, advantages and disadvantages, working principles, detailed application field plans, and alternative models.

Basic Information Overview

  • Category: Schottky rectifier diode
  • Use: It is used as a rectifier in power supply applications.
  • Characteristics: High current capability, low forward voltage drop, fast switching speed.
  • Package: TO-220AB
  • Essence: The diode allows for efficient conversion of alternating current (AC) to direct current (DC) in power supply circuits.
  • Packaging/Quantity: Typically packaged individually, quantity varies based on manufacturer's specifications.

Specifications

  • Maximum Average Forward Current: 10A
  • Peak Repetitive Reverse Voltage: 200V
  • Forward Voltage Drop: 0.65V at 5A
  • Reverse Leakage Current: 50µA at 200V
  • Operating Temperature Range: -65°C to +175°C

Detailed Pin Configuration

The MBRB10200CT-13 typically has three pins: 1. Anode (A) 2. Cathode (K) 3. Not connected (NC)

Functional Features

  • Efficient rectification of AC to DC due to low forward voltage drop.
  • Fast switching speed enables high-frequency operation in power supply circuits.
  • High current capability allows for use in demanding applications.

Advantages and Disadvantages

Advantages

  • Low forward voltage drop reduces power dissipation.
  • Fast switching speed enables high-frequency operation.
  • High current capability supports demanding applications.

Disadvantages

  • Higher cost compared to standard silicon rectifier diodes.
  • Sensitive to reverse voltage spikes, requiring additional protection circuitry in some applications.

Working Principles

The MBRB10200CT-13 operates based on the Schottky barrier principle, where the metal-semiconductor junction allows for faster switching and lower forward voltage drop compared to conventional PN-junction diodes.

Detailed Application Field Plans

The MBRB10200CT-13 is commonly used in the following applications: - Switching power supplies - DC-DC converters - Motor drive circuits - Solar panel bypass diodes

Detailed and Complete Alternative Models

Some alternative models to the MBRB10200CT-13 include: - 1. SR5100: Similar specifications, different package (SMA) - 2. SS34: Lower current capability, smaller package (DO-214AC) - 3. SB560: Higher voltage rating, similar current capability (TO-220AC)

In conclusion, the MBRB10200CT-13 is a high-performance Schottky rectifier diode with specific advantages and limitations that make it suitable for various power supply and rectification applications.

[Word count: 411]

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan MBRB10200CT-13 dalam solusi teknis

  1. What is MBRB10200CT-13?

    • MBRB10200CT-13 is a Schottky barrier rectifier diode designed for high efficiency and low power loss in applications such as switching power supplies, converters, freewheeling diodes, and reverse battery protection.

  2. What are the key features of MBRB10200CT-13?

    • The key features include a low forward voltage drop, high current capability, high surge current capability, and a small form factor for space-constrained applications.

  3. What are the typical applications of MBRB10200CT-13?

    • Typical applications include DC/DC converters, output rectification, freewheeling diodes, OR-ing diodes, and reverse battery protection.

  4. What is the maximum forward voltage of MBRB10200CT-13?

    • The maximum forward voltage at 10A is typically 0.65V.

  5. What is the maximum reverse voltage of MBRB10200CT-13?

    • The maximum reverse voltage is 200V.

  6. What is the operating temperature range of MBRB10200CT-13?

    • The operating temperature range is -65°C to +175°C.

  7. What is the package type of MBRB10200CT-13?

    • MBRB10200CT-13 comes in a TO-220AB package.

  8. What are the thermal characteristics of MBRB10200CT-13?

    • The thermal resistance from junction to case is typically 3.0°C/W.

  9. What are the recommended mounting techniques for MBRB10200CT-13?

    • Recommended mounting techniques include using a proper heatsink to dissipate heat and ensuring good thermal contact between the device and the heatsink.

  10. Where can I find detailed specifications and application notes for MBRB10200CT-13?

    • Detailed specifications and application notes can be found in the product datasheet provided by the manufacturer or distributor.