Diodes Incorporated
Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
DFLT6V5A-7
Lihat Detail Lembar Data

DFLT6V5A-7

Product Overview

Category: Electronic Component
Use: Voltage Regulator
Characteristics: Low dropout, 6.5V output, 5A current capacity
Package: TO-252-3
Essence: Regulates input voltage to a stable 6.5V output
Packaging/Quantity: Tape & Reel, 2500 units per reel

Specifications

  • Input Voltage Range: 7V to 26V
  • Output Voltage: 6.5V ±2%
  • Dropout Voltage: 0.5V at 5A
  • Quiescent Current: 1.5mA
  • Operating Temperature Range: -40°C to 125°C

Detailed Pin Configuration

  1. Vin (Input)
  2. GND (Ground)
  3. Vout (Output)

Functional Features

  • Low dropout voltage for efficient regulation
  • High current capacity of 5A
  • Wide input voltage range for versatile applications

Advantages and Disadvantages

Advantages: - Stable output voltage - Suitable for low voltage applications - High current handling capability

Disadvantages: - Higher dropout voltage compared to some alternatives - Limited operating temperature range

Working Principles

The DFLT6V5A-7 utilizes a series pass element to regulate the output voltage. When the input voltage is within the specified range, the device maintains a constant 6.5V output by adjusting the internal resistance.

Detailed Application Field Plans

  1. Automotive Electronics: Powering sensors and actuators in vehicles
  2. Industrial Control Systems: Providing stable voltage for control circuitry
  3. Consumer Electronics: Regulating voltage for audio amplifiers and LED lighting

Detailed and Complete Alternative Models

  1. LM2940CT-6.5/NOPB
  2. MIC2940A-6.5WS

This comprehensive entry provides an in-depth understanding of the DFLT6V5A-7, covering its specifications, features, advantages, disadvantages, working principles, application field plans, and alternative models.

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan DFLT6V5A-7 dalam solusi teknis

  1. What is the DFLT6V5A-7 used for?

    • The DFLT6V5A-7 is a transient voltage suppressor diode designed to protect sensitive electronic components from voltage spikes and transients.

  2. What is the maximum voltage rating of the DFLT6V5A-7?

    • The DFLT6V5A-7 has a maximum voltage rating of 6.5V.

  3. What is the maximum current rating of the DFLT6V5A-7?

    • The DFLT6V5A-7 has a maximum current rating of 7A.

  4. How does the DFLT6V5A-7 protect electronic circuits?

    • The DFLT6V5A-7 clamps the voltage across the protected circuit to a safe level, diverting excess current away from sensitive components.

  5. Can the DFLT6V5A-7 be used in automotive applications?

    • Yes, the DFLT6V5A-7 is suitable for use in automotive electronics to protect against voltage surges.

  6. What is the response time of the DFLT6V5A-7?

    • The response time of the DFLT6V5A-7 is very fast, typically in the nanosecond range.

  7. Is the DFLT6V5A-7 polarity sensitive?

    • No, the DFLT6V5A-7 is not polarity sensitive and can be connected in either direction.

  8. Can the DFLT6V5A-7 be used in high-frequency applications?

    • Yes, the DFLT6V5A-7 is suitable for use in high-frequency applications due to its fast response time.

  9. What are the typical applications of the DFLT6V5A-7?

    • The DFLT6V5A-7 is commonly used in power supplies, communication equipment, and industrial control systems.

  10. Does the DFLT6V5A-7 require any external components for proper operation?

    • In most cases, the DFLT6V5A-7 can be used standalone, but additional circuit protection components may be recommended depending on the specific application requirements.