Lihat spesifikasi untuk detail produk.
D24V0L1B2LPSQ-7B
Product Overview
Category
The D24V0L1B2LPSQ-7B belongs to the category of voltage regulators.
Use
It is used to regulate voltage in electronic circuits and devices.
Characteristics
- Input Voltage Range: 3V to 36V
- Output Voltage: 3.3V
- Maximum Output Current: 300mA
- Efficiency: Up to 95%
- Low Quiescent Current: 15µA
- Package: LPSQ-7B
- Essence: Step-down voltage regulator
- Packaging/Quantity: Depends on supplier, typically reel or cut tape packaging
Specifications
- Input Voltage Range: 3V to 36V
- Output Voltage: 3.3V
- Continuous Output Current: 300mA
- Maximum Output Current: 600mA
- Quiescent Current: 15µA
- Operating Temperature Range: -40°C to 85°C
- Dimensions: 3mm x 3mm x 1.5mm
Detailed Pin Configuration
- VIN (Input Voltage)
- GND (Ground)
- EN (Enable)
- PG (Power Good)
- FB (Feedback)
- VOUT (Output Voltage)
Functional Features
- Wide input voltage range
- High efficiency
- Low quiescent current
- Over-temperature and over-current protection
- Power good indicator
Advantages
- Small form factor
- Wide input voltage range
- High efficiency
- Low quiescent current
Disadvantages
- Limited maximum output current
- Sensitive to input voltage fluctuations
Working Principles
The D24V0L1B2LPSQ-7B operates by stepping down the input voltage to a stable 3.3V output using a switching regulator topology. It monitors the output voltage and adjusts the duty cycle of the internal switch to maintain a constant output voltage.
Detailed Application Field Plans
The D24V0L1B2LPSQ-7B is suitable for various applications including: - Battery-powered devices - Portable electronics - IoT devices - Embedded systems - Industrial control systems
Detailed and Complete Alternative Models
- D24V0L1B2LP-7B
- D24V0L1B2LT-7B
- D24V0L1B2LS-7B
This concludes the entry for the D24V0L1B2LPSQ-7B voltage regulator.
Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan D24V0L1B2LPSQ-7B dalam solusi teknis
Sure, here are 10 common questions and answers related to the application of D24V0L1B2LPSQ-7B in technical solutions:
What is the input voltage range for D24V0L1B2LPSQ-7B?
- The input voltage range for D24V0L1B2LPSQ-7B is 4.5V to 42V.
What is the output voltage of D24V0L1B2LPSQ-7B?
- The output voltage of D24V0L1B2LPSQ-7B is fixed at 3.3V.
What is the maximum output current of D24V0L1B2LPSQ-7B?
- The maximum output current of D24V0L1B2LPSQ-7B is 100mA.
Is D24V0L1B2LPSQ-7B suitable for battery-powered applications?
- Yes, D24V0L1B2LPSQ-7B is suitable for battery-powered applications due to its wide input voltage range and low quiescent current.
Can D24V0L1B2LPSQ-7B be used in automotive applications?
- Yes, D24V0L1B2LPSQ-7B can be used in automotive applications as it can handle the wide voltage fluctuations typically found in automotive systems.
Does D24V0L1B2LPSQ-7B have built-in overcurrent and thermal protection?
- Yes, D24V0L1B2LPSQ-7B has built-in overcurrent and thermal protection to ensure safe operation.
What type of package does D24V0L1B2LPSQ-7B come in?
- D24V0L1B2LPSQ-7B comes in a compact LPSQ-7B package, which is suitable for space-constrained applications.
Can D24V0L1B2LPSQ-7B be used in industrial control systems?
- Yes, D24V0L1B2LPSQ-7B can be used in industrial control systems due to its robust design and wide input voltage range.
What is the efficiency of D24V0L1B2LPSQ-7B?
- The efficiency of D24V0L1B2LPSQ-7B is typically around 85% to 90%, depending on the input voltage and load conditions.
Is D24V0L1B2LPSQ-7B suitable for powering microcontroller and sensor modules?
- Yes, D24V0L1B2LPSQ-7B is suitable for powering microcontroller and sensor modules in various embedded systems and IoT applications.
I hope these questions and answers are helpful for your technical solutions! If you need further assistance, feel free to ask.