Lihat spesifikasi untuk detail produk.
AZ2940D-3.3TRE1
Product Overview
Category
AZ2940D-3.3TRE1 belongs to the category of voltage regulators.
Use
This product is primarily used for regulating voltage in electronic circuits.
Characteristics
- Voltage regulation capability
- Low dropout voltage
- High output current
- Thermal shutdown protection
- Short circuit protection
Package
AZ2940D-3.3TRE1 comes in a compact TO-252 package.
Essence
The essence of this product lies in its ability to provide stable and regulated voltage output.
Packaging/Quantity
Each package of AZ2940D-3.3TRE1 contains one voltage regulator.
Specifications
- Input Voltage Range: 4.5V - 26V
- Output Voltage: 3.3V
- Output Current: Up to 1A
- Dropout Voltage: 0.6V (typical)
- Operating Temperature Range: -40°C to +125°C
Detailed Pin Configuration
AZ2940D-3.3TRE1 has three pins:
- Vin (Pin 1): Input voltage pin.
- Vout (Pin 2): Output voltage pin.
- GND (Pin 3): Ground pin.
Functional Features
- Voltage Regulation: The AZ2940D-3.3TRE1 ensures a stable output voltage of 3.3V, regardless of input voltage fluctuations.
- Low Dropout Voltage: With a low dropout voltage of only 0.6V, this regulator can operate efficiently even when the input voltage is close to the desired output voltage.
- High Output Current: Capable of delivering up to 1A of continuous output current, making it suitable for various applications.
- Thermal Shutdown Protection: The device incorporates thermal shutdown protection, which prevents damage due to excessive heat.
- Short Circuit Protection: AZ2940D-3.3TRE1 includes built-in short circuit protection, safeguarding the regulator and connected components from damage in case of a short circuit.
Advantages and Disadvantages
Advantages
- Stable and regulated output voltage
- Low dropout voltage for efficient operation
- High output current capability
- Thermal and short circuit protection for enhanced reliability
Disadvantages
- Limited input voltage range (4.5V - 26V)
- Single output voltage option (3.3V)
Working Principles
AZ2940D-3.3TRE1 operates based on the principle of linear voltage regulation. It uses a pass transistor to regulate the output voltage by adjusting the resistance between the input and output terminals. This ensures that the output voltage remains constant despite variations in the input voltage.
Detailed Application Field Plans
AZ2940D-3.3TRE1 finds applications in various electronic devices and systems, including but not limited to: - Power supplies - Battery-powered devices - Embedded systems - Industrial control systems - Automotive electronics
Detailed and Complete Alternative Models
Some alternative models that can be considered as alternatives to AZ2940D-3.3TRE1 include: - LM1117-3.3 - LT1086-3.3 - TPS79633
These models offer similar voltage regulation capabilities and can be used as substitutes depending on specific requirements.
In conclusion, AZ2940D-3.3TRE1 is a voltage regulator with excellent voltage regulation characteristics, high output current capability, and built-in protection features. It finds applications in various electronic systems and can be replaced by alternative models with similar specifications.
Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan AZ2940D-3.3TRE1 dalam solusi teknis
Sure! Here are 10 common questions and answers related to the application of AZ2940D-3.3TRE1 in technical solutions:
Q1: What is AZ2940D-3.3TRE1? A1: AZ2940D-3.3TRE1 is a specific model of voltage regulator IC (integrated circuit) that provides a regulated output voltage of 3.3V.
Q2: What are the typical applications of AZ2940D-3.3TRE1? A2: AZ2940D-3.3TRE1 is commonly used in various electronic devices and systems where a stable 3.3V power supply is required, such as microcontrollers, sensors, and low-power digital circuits.
Q3: What is the input voltage range for AZ2940D-3.3TRE1? A3: The input voltage range for AZ2940D-3.3TRE1 is typically between 4.5V and 26V.
Q4: What is the maximum output current of AZ2940D-3.3TRE1? A4: The maximum output current of AZ2940D-3.3TRE1 is around 1A, which means it can provide up to 1A of current at the regulated 3.3V output.
Q5: Does AZ2940D-3.3TRE1 require any external components for operation? A5: Yes, AZ2940D-3.3TRE1 requires a few external components like input and output capacitors for stability and filtering purposes. The datasheet provides recommended values for these components.
Q6: Is AZ2940D-3.3TRE1 a linear or switching regulator? A6: AZ2940D-3.3TRE1 is a linear regulator, which means it uses a linear pass element to regulate the output voltage.
Q7: What is the dropout voltage of AZ2940D-3.3TRE1? A7: The dropout voltage of AZ2940D-3.3TRE1 is typically around 1.2V. This means that the input voltage must be at least 1.2V higher than the desired output voltage for proper regulation.
Q8: Can AZ2940D-3.3TRE1 handle overcurrent or short-circuit conditions? A8: Yes, AZ2940D-3.3TRE1 has built-in protection features like current limiting and thermal shutdown to protect against overcurrent and short-circuit conditions.
Q9: What is the operating temperature range of AZ2940D-3.3TRE1? A9: The operating temperature range of AZ2940D-3.3TRE1 is typically between -40°C and +125°C, making it suitable for a wide range of environments.
Q10: Is AZ2940D-3.3TRE1 available in different package options? A10: Yes, AZ2940D-3.3TRE1 is available in various package options, such as TO-252, TO-263, and SOT-223, allowing flexibility in PCB design and mounting options.
Please note that the answers provided here are general and may vary depending on the specific datasheet and manufacturer's specifications for AZ2940D-3.3TRE1. It is always recommended to refer to the official datasheet for accurate and detailed information.