AP91352MN1-DT8-7

Basic Information Overview

• Category: Electronic Component
• Use: Power Management
• Characteristics: High Efficiency, Low Power Consumption
• Package: Surface Mount Technology (SMT)
• Essence: Voltage Regulator
• Packaging/Quantity: Tape and Reel, 3000 units per reel

Specifications

• Input Voltage Range: 2.5V - 5.5V
• Output Voltage: 1.8V
• Output Current: 500mA
• Dropout Voltage: 200mV
• Quiescent Current: 50µA
• Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The AP91352MN1-DT8-7 has a total of 8 pins. The pin configuration is as follows:

| Pin Number | Pin Name | Function | |------------|----------|----------| | 1 | VIN | Input Voltage | | 2 | GND | Ground | | 3 | EN | Enable Control | | 4 | FB | Feedback Voltage | | 5 | VOUT | Output Voltage | | 6 | PG | Power Good Indicator | | 7 | NC | No Connection | | 8 | VREF | Reference Voltage |

Functional Features

• High efficiency power conversion
• Low power consumption in standby mode
• Overcurrent protection
• Thermal shutdown protection
• Power good indicator for output voltage monitoring
• Enable control for power management

Advantages

• Wide input voltage range allows for versatile applications
• High efficiency results in reduced power loss
• Low dropout voltage ensures stable output voltage even with low input voltage
• Power good indicator provides visual feedback on output voltage status
• Enable control allows for easy power management

Disadvantages

• Limited output current of 500mA may not be suitable for high-power applications
• Operating temperature range may restrict usage in extreme environments

Working Principles

The AP91352MN1-DT8-7 is a voltage regulator that takes an input voltage within the range of 2.5V to 5.5V and provides a regulated output voltage of 1.8V. It achieves this through efficient power conversion, minimizing power loss and ensuring stable output voltage. The device also includes overcurrent protection and thermal shutdown features to safeguard against potential damage.

Detailed Application Field Plans

The AP91352MN1-DT8-7 is commonly used in various electronic devices and systems that require stable and regulated power supply. Some typical application fields include: - Battery-powered devices - Portable electronics - IoT devices - Wearable devices - Embedded systems

Detailed and Complete Alternative Models

• AP91351MN1-DT8-7: Similar specifications but with a different output voltage of 3.3V
• AP91353MN1-DT8-7: Similar specifications but with a different output voltage of 2.5V
• AP91354MN1-DT8-7: Similar specifications but with a different output voltage of 2.0V

(Note: These alternative models are provided as examples and may not cover all available options in the market.)

This entry provides comprehensive information about the AP91352MN1-DT8-7 voltage regulator. It covers its basic information, specifications, pin configuration, functional features, advantages, disadvantages, working principles, application field plans, and alternative models.