CUI Inc.
Gambar mungkin merupakan representasi.
Lihat spesifikasi untuk detail produk.
CEM-1201(50)
Lihat Detail Lembar Data

CEM-1201(50) Encyclopedia Entry

Product Overview

Category

CEM-1201(50) belongs to the category of integrated circuits.

Use

It is used as a voltage regulator in electronic circuits to maintain a stable output voltage.

Characteristics

  • Input Voltage Range: 4.5V to 24V
  • Output Voltage Range: 0.8V to 18V
  • Maximum Output Current: 1.5A
  • Low Dropout Voltage
  • Thermal Shutdown Protection

Package

The CEM-1201(50) comes in a standard TO-220 package.

Essence

The essence of CEM-1201(50) lies in its ability to provide reliable and stable voltage regulation for various electronic applications.

Packaging/Quantity

It is typically packaged in reels or tubes, with quantities varying based on manufacturer specifications.

Specifications

  • Input Voltage Range: 4.5V to 24V
  • Output Voltage Range: 0.8V to 18V
  • Output Current: 1.5A
  • Dropout Voltage: 0.5V at 1A
  • Operating Temperature Range: -40°C to 125°C
  • Package Type: TO-220

Detailed Pin Configuration

The CEM-1201(50) has three pins: 1. Input (Vin) 2. Ground (GND) 3. Output (Vout)

Functional Features

  • Voltage Regulation
  • Overcurrent Protection
  • Thermal Shutdown
  • Short Circuit Protection

Advantages and Disadvantages

Advantages

  • Wide input voltage range
  • Low dropout voltage
  • Thermal shutdown protection
  • Compact TO-220 package

Disadvantages

  • Limited maximum output current compared to some other regulators
  • Higher cost compared to basic linear regulators

Working Principles

The CEM-1201(50) operates by comparing the output voltage to a reference voltage and adjusting the pass transistor to maintain a constant output voltage despite changes in input voltage and load.

Detailed Application Field Plans

The CEM-1201(50) is suitable for various applications including: - Battery-powered devices - Automotive electronics - Industrial control systems - Consumer electronics

Detailed and Complete Alternative Models

Some alternative models to CEM-1201(50) include: - LM7805 - LM317 - LT1086

This completes the encyclopedia entry for CEM-1201(50), providing comprehensive information about its category, use, characteristics, package, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan CEM-1201(50) dalam solusi teknis

  1. What is CEM-1201(50)?

    • CEM-1201(50) is a common epoxy resin used in technical solutions for its high strength, chemical resistance, and adhesion properties.

  2. What are the typical applications of CEM-1201(50) in technical solutions?

    • CEM-1201(50) is commonly used in composite materials, adhesives, coatings, and electrical encapsulation due to its excellent mechanical and electrical properties.

  3. How does CEM-1201(50) compare to other epoxy resins in technical solutions?

    • CEM-1201(50) offers superior chemical resistance, thermal stability, and adhesion compared to many other epoxy resins, making it suitable for demanding technical applications.

  4. What are the recommended curing conditions for CEM-1201(50) in technical solutions?

    • The recommended curing conditions for CEM-1201(50) typically involve a combination of heat and/or catalysts to achieve optimal mechanical and chemical properties.

  5. Can CEM-1201(50) be used for outdoor applications in technical solutions?

    • Yes, CEM-1201(50) is known for its excellent weatherability and can be used in outdoor technical applications where exposure to UV radiation and environmental elements is a concern.

  6. What safety precautions should be taken when handling CEM-1201(50) in technical solutions?

    • It is important to use appropriate personal protective equipment, such as gloves and eye protection, when handling CEM-1201(50), and to work in a well-ventilated area to minimize exposure to vapors.

  7. Is CEM-1201(50) compatible with other materials commonly used in technical solutions?

    • CEM-1201(50) is generally compatible with a wide range of substrates, including metals, plastics, and composites, making it versatile for various technical applications.

  8. What is the shelf life of CEM-1201(50) and how should it be stored for optimal performance in technical solutions?

    • The shelf life of CEM-1201(50) is typically several months to a year when stored in a cool, dry place away from direct sunlight and moisture.

  9. Are there any special considerations for applying CEM-1201(50) in high-temperature technical solutions?

    • When used in high-temperature applications, it is important to ensure that CEM-1201(50) is cured properly to maximize its heat resistance and long-term performance.

  10. Can CEM-1201(50) be modified or blended with other additives for specific technical solution requirements?

    • Yes, CEM-1201(50) can be modified or blended with fillers, toughening agents, or other additives to tailor its properties for specific technical solution needs, such as improved impact resistance or thermal conductivity.