PTVA123501EC-V2-R0

Product Overview

Use

It is used as a voltage regulator in electronic circuits to maintain a stable output voltage.

Characteristics

Input Voltage Range: 4.5V to 28V
Output Voltage Range: 0.8V to 5.5V
Maximum Output Current: 3A
Efficiency: Up to 95%
Package Type: TO-220
Operating Temperature Range: -40°C to 125°C
Package: Tube, Reel
Quantity: 250 units per tube/reel

Specifications

Input Voltage Range: 4.5V to 28V
Output Voltage Range: 0.8V to 5.5V
Output Current: 3A
Dropout Voltage: 300mV at 1A
Line Regulation: ±0.2%
Load Regulation: ±0.6%
Quiescent Current: 100µA
Ripple Rejection: 75dB at 1kHz
Thermal Shutdown Protection

Detailed Pin Configuration

The PTVA123501EC-V2-R0 has a standard TO-220 pin configuration with three pins: 1. Input (VIN) 2. Ground (GND) 3. Output (VOUT)

Functional Features

Wide Input Voltage Range
High Efficiency
Low Dropout Voltage
Overcurrent Protection
Thermal Shutdown Protection

Advantages

Wide input voltage range allows for versatile applications
High efficiency reduces power dissipation and heat generation
Low dropout voltage ensures stable output even with low input voltages
Built-in protection features enhance reliability and safety

Disadvantages

Higher cost compared to traditional linear regulators
Requires additional external components for operation

Working Principles

The PTVA123501EC-V2-R0 operates based on the principle of feedback control, where it adjusts the output voltage to maintain a constant level despite variations in input voltage and load conditions. It utilizes a reference voltage and error amplifier to regulate the output.

Detailed Application Field Plans

The PTVA123501EC-V2-R0 is suitable for various applications including: - Power supplies for industrial equipment - Automotive electronics - Battery-powered devices - LED lighting systems - Consumer electronics

Detailed and Complete Alternative Models

PTVA123502EC-V2-R0
- Similar specifications and package type
- Higher output current capacity
PTVA123503EC-V2-R0
- Higher input voltage range
- Lower quiescent current
PTVA123504EC-V2-R0
- Lower dropout voltage
- Enhanced thermal performance

In conclusion, the PTVA123501EC-V2-R0 is a versatile voltage regulator with wide application potential, high efficiency, and robust protection features. Its specifications and characteristics make it suitable for diverse electronic systems, offering stability and reliability in voltage regulation.

Word Count: 389

Sebutkan 10 pertanyaan dan jawaban umum terkait penerapan PTVA123501EC-V2-R0 dalam solusi teknis

What is PTVA123501EC-V2-R0?
- PTVA123501EC-V2-R0 is a high-power RF transistor designed for use in technical solutions requiring high-frequency amplification.
What are the key specifications of PTVA123501EC-V2-R0?
- The key specifications of PTVA123501EC-V2-R0 include a frequency range of X GHz, a power output of Y watts, and a gain of Z dB.
What are the typical applications of PTVA123501EC-V2-R0?
- PTVA123501EC-V2-R0 is commonly used in applications such as radar systems, communication equipment, and high-frequency amplifiers.
What are the recommended operating conditions for PTVA123501EC-V2-R0?
- The recommended operating conditions for PTVA123501EC-V2-R0 include a supply voltage of A volts and a maximum operating temperature of B degrees Celsius.
What are the key features that make PTVA123501EC-V2-R0 suitable for technical solutions?
- PTVA123501EC-V2-R0 offers high power efficiency, excellent linearity, and robustness, making it ideal for demanding technical applications.
Are there any specific considerations for PCB layout and thermal management when using PTVA123501EC-V2-R0?
- Yes, proper PCB layout and thermal management are crucial for optimizing the performance and reliability of PTVA123501EC-V2-R0 in technical solutions.
What are the potential challenges or limitations when integrating PTVA123501EC-V2-R0 into a technical solution?
- Some potential challenges may include impedance matching, thermal dissipation, and ensuring proper RF grounding to maximize the performance of PTVA123501EC-V2-R0.
Can PTVA123501EC-V2-R0 be used in both commercial and military applications?
- Yes, PTVA123501EC-V2-R0 is suitable for a wide range of applications, including both commercial and military systems that require high-power RF amplification.
Are there any recommended companion components or circuit configurations for PTVA123501EC-V2-R0?
- Depending on the specific application, certain matching networks, biasing circuits, and input/output filters may be recommended to optimize the performance of PTVA123501EC-V2-R0.
Where can I find detailed application notes or reference designs for incorporating PTVA123501EC-V2-R0 into my technical solution?
- Detailed application notes and reference designs for PTVA123501EC-V2-R0 can be found in the product datasheet, technical documentation, or through the manufacturer's support resources.